• Restorative Dentistry and Endodontics
• /
• v.26 no.6
• /
• pp.464-484
• /
• 2001

When restoring a tooth, the dentist tries to choose the ideal material for existing situation. One criterion that is considered is its suitability for restoring coronal strength. As more tooth structure is removed, the cusps are weakened and susceptible to fracture. Further, this increased deformation may cause the formation of intermittent gaps at the margin between the hard tissue and the restoration, facilitating marginal leakage. The improvements in ceramic materials now make it possible for alternatives to amalgams, composites, and cast metal to be of offered for posterior teeth. Of the materials used, ceramics most closely approximates the properties of enamel. The introduction of computer-aided design/computer-aided manufacture(CAD/CAM) systems to restorative dentistry represents a major technological breakthrough. It is possible to design and fabricate ceramic restorations at a single appointment. Additionally, CAD/CAM systems eliminate certain errors and inaccuracies that are inherent to the indirect method and provide an esthetic restoration. The aim of this investigation was to study the loading characteristics of CAD/CAM ceramic inlay and to compare the stress distribution and displacement associated with different designs of cavity(the isthmus width and cavity depth). A human maxillary left first premolar was prepared with standard mesio-occlusal cavity preparation, as recommended by the manufacturer Ceramic inlay was fabricated with CEREC 2 CAD/CIM equipment and cemented into the prepared cavity. Three dimensional model was made by the serial photographic method. The cavity width was varied $\frac{1}{3}$, $\frac{1}{2}$ and $\frac{2}{3}$ of intercuspal distance between buccal and lingual cusp tip. The cavity depth was varied 1.5mm and 2.3mm. So six models were constructed to simulate six conditions. A point load of 500N was applied vertically onto the first node of the lingual slope from the buccal cusp tip. The stress distribution and displacement were solved using ANSYS finite element program(Swanson Analysis System). (omitted)

• Restorative Dentistry and Endodontics
• /
• v.23 no.1
• /
• pp.413-423
• /
• 1998

Dental ceramics exhibit excellent esthetic property, compressive strength, chemical durability, biocompatibility and translucency. This study evaluated the shear bond strength of composite resin to the new heat-pressed ceramic material (IPS-Empress System) depending on the surface treatments and bonding agents. The surface treatments were etching with 4.0% hydrofluoric acid, application of silane, and the combination of the two methods. Composite resin was bonded to ceramic with four kinds of dentin bonding agents(All-Bond 2, Heliobond, Scotch bond Multi-purpose and Tenure bonding agents). The ceramic specimen bonded with composite resin was mounted in the testing jig, and the universal testing machine(Zwick 020, Germany) was used to measure the shear bond strength with the cross head speed of 0.5 mm/min. The results obtained were as follows 1. The mean shear bond strength of the specimens of which the ceramic surface was treated with the combination of hydrofluoric acid and silane before bonding composite resin was significantly higher than those of the other surface treatment groups(p<0.05). 2. In the case of All-Bond 2 and Scotchbond Multi-purpose bonding agent group, the surface treatment methods did not influenced significantly on the shear bond(p>0.05). 3. Of the four bonding agents tested, the shear bond strength of Heliobond was significantly lower than those of other bonding agents regardless of the surface treatment methods(p<0.05). 4. The highest shear bond strength($12.55{\pm}1.92$ MPa) was obtained with Scotchbond Multipurpose preceded by the ceramic surface treatment with the combination of 4% hydrofluoric acid and silane.

• The Journal of Advanced Prosthodontics
• /
• v.11 no.2
• /
• pp.120-127
• /
• 2019

PURPOSE. To determine wear amount of single molar crowns, made from four different restoratives, and opposing natural teeth through computerized fabrication techniques using 3D image alignment. MATERIALS AND METHODS. A total of 24 single crowns (N = 24 patients, age range: 18 - 50) were made from lithium disilicate (IPS E-max CAD), lithium silicate and zirconia based (Vita Suprinity CAD), resin matrix ceramic material (Cerasmart, GC), and dual matrix (Vita Enamic CAD) blocks. After digital impressions (Cerec 3D Bluecam, DentsplySirona), the crowns were designed and manufactured (Cerec 3, DentsplySirona). A dualcuring resin cement was used for cementation (Variolink Esthetic DC, Ivoclar). Then, measurement and recording of crowns and the opposing enamel surfaces with the intraoral scanner were made as well as at the third and sixth month follow-ups. All measurements were superimposed with a software (David-Laserscanner, V3.10.4). Volume loss due to wear was calculated from baseline to follow-up periods with Siemens Unigraphics NX 10 software. Statistical analysis was accomplished by Repeated Measures for ANOVA (SPSS 21) at = .05 significance level. RESULTS. After 6 months, insignificant differences of the glass matrix and resin matrix materials for restoration/enamel wear were observed (P>.05). While there were no significant differences between the glass matrix groups (P>.05), significant differences between the resin matrix group materials (P<.05) were obtained. Although Cerasmart and Enamic were both resin matrix based, they exhibited different wear characteristics. CONCLUSION. Glass matrix materials showed less wear both on their own and opposing enamel surfaces than resin matrix ceramic materials.

• The Journal of Korean Academy of Prosthodontics
• /
• v.60 no.3
• /
• pp.254-262
• /
• 2022

When treating partial edentulous patients, it is important to use an appropriate restorative materials. Inappropriate restorative materials can adversely affect the outcome of prosthetic restorations. Zirconia and dental metal, which are currently and widely used materials, have a higher elastic modulus than cortical bone, so when an external force is generated, a harmful force can be applied to the implant and the bone around the implant. Polyetherketoneketone (PEKK), a recently introduced material, has a elastic modulus similar to that of cortical bone, and has many advantages in terms of physical properties and biocompatibility. This case report describes that implant-supported fixed prosthetic treatment using PEKK was performed, and functional and esthetic satisfactory results were obtained.

• Design Convergence Study
• /
• v.16 no.4
• /
• pp.81-98
• /
• 2017

This study starts from the judgment that the evaluation about preserved flower package design has to be performed based on the product attribute. The principles and components of package design are reestablished from preceding researches, the product type model is suggested based on the product attribute. The 6 principles of package design are usability, esthetic element, attracting attention, creativity, identity and implication, and the 5 components of package design are form, material, color, graphics and branding factors. The product types are classified into 4 areas following the 2 axises. The 1 axis means the degree of perception risk on acquiring information and the other means the approaching type to expected effects about products. The characteristics of package design components are analyzed from the cases belonged at each area on the product type model. Based on the this model, the strategy of preserved flower package design is drawn. At last the package of 'Preserville' is analyzed, we find out the critical points and suggest the intention point in planning the preserved flower package.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.51 no.2
• /
• pp.176-184
• /
• 2024

This study aimed to compare color matching between single-shade composite resin-restored teeth with various pulp capping materials and the dentin surrounding the restoration through instrumental analysis and visual evaluation of the color difference. Fifty maxillary right central incisor acrylic resin teeth were prepared with standardized Class III cavities on the proximal surfaces. These teeth were divided into five groups: restored with single-shade composite resin only; Ultra-Blend^TM plus followed by single-shade composite resin; TheraCal PT^TM followed by single-shade composite resin; Endocem^® MTA premixed followed by single-shade composite resin; and Well-root PT^TM followed by single-shade composite resin. The color difference (ΔE_ab^*) between the restored area and the center of the resin teeth was measured using a spectrophotometer. No significant color difference was observed in groups restored with only single-shade composite resin, Ultra-Blend^TM plus, and TheraCal PT^TM. The visual evaluation revealed that Ultra-Blend^TM plus exhibited the best color matching score, whereas the Endocem^® MTA premixed and Well-root PT^TM groups showed significantly lower color matching scores than the single-shade composite resin-only group. When opting for single-shade composite resin usage for anterior tooth restorations with the aim of reducing chair time, pulp capping materials Ultra-Blend^TM plus and TheraCal PT^TM provide esthetically pleasing results.

• Journal of the Korean Society of Costume
• /
• v.2
• /
• pp.73-88
• /
• 1978

This article is an attempt to explain, at least in part, the contemporary Korean women's consciousness of Western Dreasses. As time changes, the role of clothing undergoes varisous transitions, while values and ways of life are constantly in change. It is, therefore, proper and appropriate to recognize as among the major aspects of social psychology such phenomenon as interests, understanding of clothing, the choice of a dress, and attitudes toward clothing, etc. The purpose of this study is to discover problems concerning and their clothing and their solutions, by means of a surveying approach. The method of research used is based upon questionares distributed to parents of first-year pupils in elementary schools and to female clerks working in offices, covering the period from August through October, 1976. The number of the questionares distrubuted totalled 600, and 526 were returned to the research to be utilized for analysis. The contents of the survey included such things as values concerning clothing, kinds of clothing and their practical use, the selection of clothing and the method of purchase, fashions, etc. The classification of aquisition are self-made clothing, clothing made to order and ready-made materials. It is composed of 25 items, including affirmative reasons as well as negative ones. The processing of the material returned was made by using the computer, and based upon classifications such as ages, monthly income, occupations; thus diagraming the result in percentages. The conclusion made and the improvements proposed are as follows: 1. The values of clothing were placed on the expression of the wearer's personality (32.7) and on eauty(28. 6%). The lower age group places is stress upon the expression of personality, while the higher age group stresses beauty. About 50% of wearers are contented with their clothing, their clothing, the rest of whom them indicating their dissatisfaction with what they wear. As to designs at the time of selection, about 46% indicated their preference of personal expression, 31.8% on usefulness. In selecting material, practicality is emphasized; in selecting patterns, single color is preferred. In short, personal expression and esthetic values are primary, with consideration of practicality in mind. 2. The classification of clothing according to their uses indicates the highest numbers in normal wear (home wears) and clothings to be worn outside home. As to evening dresses, (party dress) only one or two articles were checked by many, and no such article was clamed to be possessed by most. The highest ratio of wearing was shown in the case of home wear (47.3%) and clothing to be worn outside the home, which is 55.8%. The budget for one article of clothing was greatest in the case of home wear, and clothing worn outside the home. Many used both kinds of articles for the same purpose. It is desirable, therefore, that the kinds of clothing should be varied according to the purpose for which they are worn, and that clothing appropriate for that purpose should be worn. 3. The motivation for purchasing clothing was highly chosen in the item of seasonal change, which was 55.7%; Clothing deliberately made was indicated by 45.2%. In the mothods of purchasing clothing, clothing made to order and ready-made was indicated by 44.4%, which is the highest; Clothing made to order was 25.4%, and self-sewing was 1.1%, which is the lowest. (1) In the case of self-sewing, "I like it but it is very hard," was checked by 43.6%; "It is so difficult that I cannot wear such clothing" was checked by 13.3%. From these, we can conclude that the questionees are willing to make clothing by themselves, but techniques involved in sewing and at her problems involved in the skill are complicated but when those problems are eliminated there is a possibility for practice. The response checked by questionees concerning the self-sewing was, "It's economical", which is a clear indication that many questionees are positive for self-sewing. It is generally believed that ready-made clothing is cheaper, but it is not necessarily so. In consideration of the quality of clothing, self-sewing is a necessity, and it is desirable that it should be encouraged. (3) Problems involved in ready-made clothing, such as designs, skills, size (fitting) should be eliminated. When these problems are scientifically gotten rid of, it is possible that affirmative returns will be expected. Affirmative responses such as "Ready-made clothing is economical," "You can select there on the spot," are good signs that many women expect to wear ready-made clothing. It is in this sense that the prospect for ready-made clothing is brighter when much development for ready-made clothing is on the way. 4. Much concern for fashion are checked in such item of questions as "Fashionable clothing in the show window," "Clothes worn by women." The first item was checked by 50.1 %, and the second was checked by 48.6%. The reason for following fashion is "Because many people wear them," which was indicated by 30.4%. The reason for not following fashion is "It is too expensive," which was checked by 29.6%. The 26.2% of the answers indicated that "Fashionable clothing is devoid of personality," The influences of fashion over the development of fashion over the development of clothing are two-fold: Esthetic and active. It is not to be deniable that people follow fashion more or less. 1978.9>

• The Journal of Korean Academy of Prosthodontics
• /
• v.38 no.2
• /
• pp.129-146
• /
• 2000

An increasing demand for esthetic restorations has led to the development of new ceramic systems. In-Ceram, a glass-infiltrated alumina ceramic has three to few times greater flexural strength than other ceramic glass material. Because of its high strength, In-Ceram has been suggested as inlay, crown, laminate veneer and core material for resin bonded fixed partial dentures. This clinical application requires a stable resin bond to In-Ceram core. The purpose of this study was to evaluate the shear bond strength between In-Ceram core and resin cements according to various surface treatments and storage conditions. The surface of each In-Ceram core sample was subjected to one of the following treatments and then bonded to Panavia 21 or Variolink II resin cement. ; (1) sandblasting with $110{\mu}m$ aluminum oxide powder, (2) sandblasting and silanization, (3) sandblasting and Siloc treatment, (4) sandblasting and Targis link application. Each of eight bonding groups was tested in shear bond strengths after the following storage times and thermocycling. ; A) 24 hours storage in distilled water at $37^{\circ}C$, B) 5 weeks storage in distilled water at $37^{\circ}C$ C) 5 weeks storage in distilled water at $37^{\circ}C$ and thermocycled 2,000 thormocycling for every 10 days(totally 10,000 thermocycting) in $5^{\circ}C-55^{\circ}C$ bath. The bond failure modes were observed with scanning electron microscope(SEM). The results were as fellows : 1 The shear bond strengths of sandblasting group were significantly lesser than the other groups after 24 hours water storage. No significant difference of bonding strengths was found between storage time conditions(24 hours and 5 weeks). The shear bond strengths showed a tendency to decrease in Variolink II bonding groups and to increase in Panavia 21 bonding groups. 3. After thermocycling, the shear bond strengths of all groups were significantly decreased(p<0.01) and Targis link group exhibited significantly greater strengths than the other groups(p<0.05). 4. Panavia 21 bonding groups exhibited significantly greater bonding strengths in sandblasting group(p<0.01) and silane group(p<0.05) than Variolink II bonding groups. 5. In observation of bond failure modes, Targis link group showed cohesive failure in resin part and silane group and Siloc group showed complex failure and sandblasting group showed adhesive failure between In-Ceram and resin.

• The Journal of Korean Academy of Prosthodontics
• /
• v.45 no.1
• /
• pp.21-33
• /
• 2007

Statement of problem: The esthetic component of dental care has become increasingly more important, while new tooth-colored materials are continually marketed. Various new indirect composite materials have been developed with required advantages. The most recent development in the indirect composites has been the introduction of the second-generation laboratory composite or poly-glass materials. They are processed by different laboratory techniques based on combinations of heat, pressure, vacuum and light polymerization. Although, second generation products became available in 1995, their characteristics and clinical performance have not been adequately investigated. Purpose: The aim of this study was to measure the mechanical properties of the second generation indirect resin system and compare these with an existing universal direct composite resin. Material and method: In this study four indirect composite material (Adoro LC, BelleGlass HP, Tescera, Synfony) were tested for flexural strength, wear resistance, hardness and their degree of conversion against Z250, a light cure direct composite. Results: Within the limitations of this study, the following conclusions were drawn: 1. From the abrasion wear result, Adoro showed the least volume loss while Synfony showed the greatest volume loss. Z250 and BelleGlass HP didn't show significant difference (p>0.05), but they showed significant difference with other groups (p<0.05). From the attrition wear, BelleGlass HP showed the least volume loss and it didn’t show significant difference with Tescera (p>0.05). While Synfony showed the greatest volume loss that it showed significant difference with other groups (p>0.05). 2. Mean values of flexural strength by means of three point bending test was in the order of Z250, Adoro, Belleglass HP, Tescera and Synfony. Mean elastic modulus was in the order of Z250, BelleGlass HP, Tescera, Adoro and Synfony. 3. The result of Vicker‘s microhardness value showed that significantly higher value in Z250 (p<0.05), and is in the order of BelleGlass HP, Tescera, Adoro and Synfony. 4. The degree of conversion measured by FT-IR showed significantly higher value in BelleGlass HP (p<0.05), and is in the order of Adoro, Synfony, Tescera and Z250. Conclusion: Significant differences were found in the flexural strength, wear resistance, hardness and their degree of conversion.

• Journal of Gifted/Talented Education
• /
• v.10 no.2
• /
• pp.25-46
• /
• 2000

These purposes are to have a necessity to be educated for the linguistic gifted among many gifted in speedy changeable age, and to find out what differences are of properties between the linguistic gifted children and nongifted children through comparing/analysing to gifted children any nongifted children using performance evaluation on writer's ability. Therefore, it intends to use as a assisting material in order to develop ability and properties of the linguistic gifted children and nongifted children as well. The studying details are 1) to compare/analyze thinking ability between the linguistic gifted children and nongifted children 2) to find out differences of thinking ability for unrealistic reasoning between the linguistic gifted children and nongifted children. The studying subjects had been chosen 3 children as a first grade in 'C' Gifted Academy and 3 children as a first grade in an elementary school from June 3, 1999 to June 12, 1999. The studying instrument was an evaluation of linguistic properties certification(Project Spectrum : Krechevsky,'1994). It had got a frequency calculation, average and standard deviation through the material anylzing with the program SPSSWIN. The conclusions are as belows, First, as a result of performance evaluation on writer's ability to gifted children and nongifted children, the gifted children were outstandingly shown the linguistic ability getting much higher score than nongifted children in respect of vocabulary level, structure of writing, and consistency/logicality of theme. Second, it was shown the gifted children had diffusing thought than nongifted children through the esthetic question and impformation memories with listening to the realistic juvenil story and the unrealistic juvenile story.