• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.4 no.1
• /
• pp.62-77
• /
• 2010

Emerging applications with high data rates will need to transport bulk data reliably in wireless sensor networks. ARQ (Automatic Repeat request) or Forward Error Correction (FEC) code schemes can be used to provide reliable transmission in a sensor network. However, the naive ARQ approach drops the whole frame, even though there is a bit error in the frame and the FEC at the bit level scheme may require a highly complex method to adjust the amount of FEC redundancy. We propose a bulk data transmission scheme based on erasure-resilient code in this paper to overcome these inefficiencies. The sender fragments bulk data into many small blocks, encodes the blocks with LT codes and packages several such blocks into a frame. The receiver only drops the corrupted blocks (compared to the entire frame) and the original data can be reconstructed if sufficient error-free blocks are received. An incidental benefit is that the frame error rate (FER) becomes irrelevant to frame size (error recovery). A frame can therefore be sufficiently large to provide high utilization of the wireless channel bandwidth without sacrificing the effectiveness of error recovery. The scheme has been implemented as a new data link layer in TinyOS, and evaluated through experiments in a testbed of Zigbex motes. Results show single hop transmission throughput can be improved by at least 20% under typical wireless channel conditions. It also reduces the transmission time of a reasonable range of size files by more than 30%, compared to a frame ARQ scheme. The total number of bytes sent by all nodes in the multi-hop communication is reduced by more than 60% compared to the frame ARQ scheme.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.37 no.2
• /
• pp.91-97
• /
• 2000

Tn this paper, a novel control circuit applicable to the error sensor loop block in the feedforward linearizer system is proposed. The proposed control circuit is applied to the error sensor loop block, where in the 11dB power range, it operates stably, and makes main carrier signals to be eliminated more than 40dB below 3$\^$rd/ order IM level. In the operating point, the amplitude control error is 0.05∼0.12dB, and the phase control error is smaller than 0.02。. It is verified theoretically as well as experimentally that the control circuit can precisely compensate the variation of nonlinear characteristics in a high power amplifier, due to the variations of input power, operating temperature, humidity and the other system environments.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.39 no.1
• /
• pp.64-72
• /
• 2016

In this paper, we utilize a Gaussian process to predict the power consumption in the air-conditioning system. As the power consumption in the air-conditioning system takes a form of a time-series and the prediction of the power consumption becomes very important from the perspective of the efficient energy management, it is worth to investigate the time-series model for the prediction of the power consumption. To this end, we apply the Gaussian process to predict the power consumption, in which the Gaussian process provides a prior probability to every possible function and higher probabilities are given to functions that are more likely consistent with the empirical data. We also discuss how to estimate the hyper-parameters, which are parameters in the covariance function of the Gaussian process model. We estimated the hyper-parameters with two different methods (marginal likelihood and leave-one-out cross validation) and obtained a model that pertinently describes the data and the results are more or less independent of the estimation method of hyper-parameters. We validated the prediction results by the error analysis of the mean relative error and the mean absolute error. The mean relative error analysis showed that about 3.4% of the predicted value came from the error, and the mean absolute error analysis confirmed that the error in within the standard deviation of the predicted value. We also adopt the non-parametric Wilcoxon's sign-rank test to assess the fitness of the proposed model and found that the null hypothesis of uniformity was accepted under the significance level of 5%. These results can be applied to a more elaborate control of the power consumption in the air-conditioning system.

• The Journal of the Acoustical Society of Korea
• /
• v.27 no.6
• /
• pp.286-295
• /
• 2008

Underwater acoustic communication has multi path error because of reflection by sea-level and sea-bottom. The multipath of underwater channel causes signal distortion and error floor. In this paper, we consider the use of various channel coding schemes such as RS code, convolutional code, cross-layer code and LDPC code in order to compensate the multipath effect in underwater channel. As shown in simulation results, characteristic of multipath error is similar to that of random error, so interleaver has little effect for error correcting. For correcting of error floor by multipath error, it is necessary strong channel codes like LDPC code that is similar to Shannon's limit. And the performance of concatenated codes including RS codes has better performance than using singular channel codes.

• Proceedings of the IEEK Conference
• /
• 2000.06a
• /
• pp.5-8
• /
• 2000

In this paper, we present a new cぉnet coding method, so called MLC (Multi-Level Codes), for error detection and correction in digital wireless communication. MLC coding method we the same coding procedure wed in the convolutional coding but it is distinguished from the existing convolutional coding in point of generating the code word by using multi-level information data (M-ary signal) and in point of speed of coding procedure Through computer simulation, we analyze the performance of the coding method suggested here compared to convolutional coding method in case of modulo-operation and in case of non-binary coding Procedure respectively under various channel environments.

• Proceedings of the IEEK Conference
• /
• 1998.10a
• /
• pp.1013-1016
• /
• 1998

A method for generation of design verification tests from behavior-level VHDL program is presented. Behavioral VHDL programs contain multiple communicating processes, signal assignment statements. So for large, complex system, it is difficult problem to test or simulation. In this paper, we proposed a new hardware design verification method. For this method generates control flow graph(CFG.) and process modeling graph(PMG) in the given under the testing VHDL program. And this method proved very effective that all the assumed design errors could be detected.

• Proceedings of the Acoustical Society of Korea Conference
• /
• 1997.06a
• /
• pp.68-74
• /
• 1997

Ship radiated noise is an infortant parameter which dtermines Anti Submarine Warfare(ASW) countermeansure or passive Sonar detection and classification performance. Its measurement should be performed under controlled ocean acoustic environment. In data reduction of the measured data from hydrophone array, theeffect fo ambient noise, surface reflection and bottom reflection etc. should be compensated to obtain the source level of the ship radiated noise. This study describes the measurement hydrophone array design criteria based on the analysis of transimission anomaly due to the surface reflection.

• Proceedings of the IEEK Conference
• /
• 1999.11a
• /
• pp.47-50
• /
• 1999

Adaptive channel equalization accomplished without resorting to a training sequence is known as blind equalization. The Constant Modulus Algorithm(CMA) and Modified CMA(MCMA) are widely referenced algorithms for blind equalization of a QAM system. This paper proposes a hybrid scheme of CMA and MCMA with Carrier Recovery that is robust for high level QAM with low steady state tracking error.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2007.10a
• /
• pp.681-684
• /
• 2007

This paper proposed and designed I-PD Controller using Shunji Manabe's CDM. The designed controller is applied to a level control system. The designed I-PD controller is smaller steady state error and get a specific response. A simulation results, the designed controller was better than a Fuzzy I-PD controller on a level control system.

• Journal of Information Processing Systems
• /
• v.4 no.1
• /
• pp.33-40
• /
• 2008

Traceability has been held as an important factor in testing activities as well as model-driven development. Vertical traceability affords us opportunities to improve manageability from models and test cases to a code in testing and debugging phase. This paper represents a vertical test method which connects a system test level and an integration test level in testing stage by using UML. An experiment how traceability works to effectively focus on error spots has been included by using concrete examples of tracing from models to the code.