• The Magazine of the IEIE
• /
• v.42 no.7
• /
• pp.26-38
• /
• 2015

고집적화를 위한 Floating Gate NAND 개발과정에서 몇 차례 기술적 한계상황에 직면하였었지만, Air-Gap, Double patterning, Multi-level Cell, Error Correction Code과 같은 breakthrough idea 을 활용하여 1Xnm까지 성공적인 scale-down 을 하였고 10nm 까지도 바라보고 있지만, 10nm 미만으로는 적절한 방안을 찾지 못한 상황입니다. CTD 의 3D NAND Flash는 Aspect Ratio, Poly channel의 intrinsic 특성, Data 보존 능력 등 해결 해야 할 issue 들이 남아 있지만, F.G Flash 의 지난 20년간 Lesson-learn 과 Band engineering, Channel Si, PUC 의 요소기술 개발 및 System algorithm 개발, QLC 개발 등을 통하여 F.G Flash를 넘어 지속적인 Cost-down 이 가능할 것입니다.

• Journal of Magnetics
• /
• v.21 no.3
• /
• pp.437-441
• /
• 2016

Dipole model based analytical expression is proposed to estimate the length and depth of the rectangular defect on ferromagnetic pipe. Among the three leakage profiles of Magnetic Flux Leakage (MFL), radial and axial leakage profiles are considered in this work. Permeability variation of the specimen is ignored by considering the flux density as close to saturation level of the inspected specimen. Comparing the profile of both the components, radial leakage profile furnishes the better estimation of defect parameter. This is evident from the results of error percentage of length and depth of the defect. Normalized pattern of the proposed analytical model radial leakage profile is good agreement with the experimentally obtained profile support the performance of proposed expression.

• Proceedings of the KIPE Conference
• /
• 2016.07a
• /
• pp.173-174
• /
• 2016

This paper proposes a comparison of Voltage Oriented Control (VOC) and Direct Power Control (DPC) under command mode transition for PMSG Wind Turbines (WT). Based on a neutral point clamped three level back to back type Voltage Source Converter (VSC), proposed control scheme automatically control the generated output power to satisfy a grid requirement from the hierarchical wind farm controller. Automatic command mode transition based on the dc-link voltage error provides a command mode changing between grid command and MPPT mode. It is confirmed through PLECS simulations in Matlab. Simulation result shows that proposed control scheme of VOC and DPC achieves a much shorter transient time of generated output power than the conventional control scheme of MPPT with optimal torque control and VOC under a step response. The proposed control scheme makes it possible to provide a good dynamic performance for PMSG wind turbines in order to generate a high quality output power.

• Journal of the Semiconductor & Display Technology
• /
• v.14 no.1
• /
• pp.31-37
• /
• 2015

This paper is on the design and manufacturing of vibration tester (shaker) for experiments about effects on the performance of semiconductor chips and Li-ion batteries by vibration. Shaker in the market are quite expensive, it is difficult for basic researchers to contact. In this study, in order to improve this, we designed and manufactured with an entry-level into mass production possible approaches in terms of performance required to a minimum. The shaker system is operated by Matlab and LabView. The target performances are 200Hz frequency and 5% error, and these were satisfied.

• Journal of The Institute of Information and Telecommunication Facilities Engineering
• /
• v.6 no.3
• /
• pp.9-13
• /
• 2007

In this paper, we propose a system that can be used to provide the national standard time for the general public with ease by using the self-implemented independent time-code generator for transmitting standard time information through both the wired and the wireless networks. The newly proposed time code is different from conventional methods in the point that it has a structural advantage of having an ability of obtaining reliable data by repeatedly transmitting the same information. We observe that it is sufficiently possible to transmit the time information with a microsecond level because measurement result shows that the system uncertainty is about few nanosecond of time-error fluctuation through the self characteristic measurement of total system including the time-code generator and decoder system receiving time-information.

• Magazine of the Korea Concrete Institute
• /
• v.3 no.4
• /
• pp.117-123
• /
• 1991

It is widely recognized that the strengths of reinforced concrete members have random characteristics due to the variability of the mechanical properties of concrete and steel, the dimensional error as well as incorrect placement of reinforcing bars. Statistical models of the variabilities of strengths of reinforced concrete members, therefore, need to be developed to evaluate the safety level implied in current practices. Based on the probabilistic models of basic factors affecting the R.C. member strengths, in this study, the probabilistic characteristics of member resistance have been studied through Monte Carlo simulation.

• Proceedings of the KIPE Conference
• /
• 2003.07a
• /
• pp.415-419
• /
• 2003

This paper focuses on a simple technique to reduced torque ripple in the direct torque control inverter for PMSM drive. It is actually impossible to raise the inverter switching frequency in the conventional system, although the hysterisis bandwidths for the stator flux and torque control are sufficiently diminished, because of the sampling Interval and the delay in estimating the flux and the torque In order to overcome the problem, the proposed method introduces a dithering technique into the conventional system by superposing triangular waves with high frequency and minute amplitude on the torque error. And the programable 3- stage lowpass filter is added instead of pure Integrator. Simulation results prove the feasibility of proposed strategy compared with conventional method.

• Proceedings of the Korean Institute of Intelligent Systems Conference
• /
• 2003.09a
• /
• pp.300-303
• /
• 2003

An Algorithm based on direct implementation of variable structure systems theory approach is proposed for on-line training of multilayer perceptrons. Network structures which have multiple inputs, single output and one hidden layer are considered and the weights are assumed to have capabilities for continuous time adaptation. The zero level set of the network learning error is regarded as a sliding surface in the learning parameters space. A sliding mode trajectory can be brought on and reached in finite time on such a sliding manifold. Results from simulated on-line identification task for a two-link planar manipulator dynamics are also presented.

• Journal of Korean Society for Quality Management
• /
• v.32 no.2
• /
• pp.201-211
• /
• 2004

Process adjustment is a complimentary tool to process monitoring in process control. Process adjustment directs on maintaining a process output close to a target value by manipulating another controllable variable, by which significant process improvement can be achieved. Therefore, this approach can be applied to the 'Improve' stage of Six Sigma strategy. Though the optimal control rule minimizes process variability in general, it may not properly function when special causes occur in underlying process, resulting in off-target bias and increased variability in the adjusted output process, possibly for long periods. In this paper, we consider a responsive feedback control system and the minimum mean square error control rule. The bias in the adjusted output process is investigated in a general framework, especially focussing on stationary underlying process and the special cause of level shift type. Illustrative examples are employed to illustrate the issues discussed.

• International Commerce and Information Review
• /
• v.5 no.2
• /
• pp.207-225
• /
• 2003

The purpose of this study is to examine the legal aspects on the formation of international contract in electronic commerce. The findings could be summarized as follows. rug, the contract doctrine of the contract formation by electronic data message, time of dispatch and receipt of data message, error in electronic communication, contract form and electronic signature could be supported or protected by the existing contract doctrine. Second, In relation to the contract formation arranged by electronic agents, the established contract doctrine provides no clear answer to the question whether changes provided by the interaction of electronic agents are enforceable. The enforceability question is left to future legislation. Finally, It is necessary that a significant level of formality together with the disclosure on the contract formality by certain act be conveyed 10 a potential buyer so that the buyer is impressed that the contact by the certain act could be valid.