A study on the torque ripple reduction of PMSM in direct torque control by using dither signal

Dithering기법에 의한 직접 토크 제어 방식의 토크리플 개선에 관한 연구

  • Lee H.H. (School of Electrical Engineering and informational System, University of Ulsan) ;
  • Kim J.H. (School of Electrical Engineering and informational System, University of Ulsan)
  • 이홍희 (울산대학교 전기전자정보시스템공학부) ;
  • 김정현 (울산대학교 전기전자정보시스템공학부)
  • Published : 2003.07.01

Abstract

This paper focuses on a simple technique to reduced torque ripple in the direct torque control inverter for PMSM drive. It is actually impossible to raise the inverter switching frequency in the conventional system, although the hysterisis bandwidths for the stator flux and torque control are sufficiently diminished, because of the sampling Interval and the delay in estimating the flux and the torque In order to overcome the problem, the proposed method introduces a dithering technique into the conventional system by superposing triangular waves with high frequency and minute amplitude on the torque error. And the programable 3- stage lowpass filter is added instead of pure Integrator. Simulation results prove the feasibility of proposed strategy compared with conventional method.

Keywords