• Title/Summary/Keyword: Error detection

Search Result 2,324, Processing Time 0.03 seconds

A Study on Phase Bearing Error using Phase Delay of Relative Phase Difference

  • Lee, Kwan Hyeong
    • International Journal of Internet, Broadcasting and Communication
    • /
    • v.13 no.2
    • /
    • pp.76-81
    • /
    • 2021
  • This study proposes a method to reduce the phase error of the received signal to detect the object bearing. The phase shift of the received signal occurs due to the multipath of the signal by natural structure or artificial structures. When detecting the direction of the object using radio waves, the phase of the received signal cannot be accurately detected because of the phase bearing error in the object detection direction. The object detection direction estimation depends on the phase difference, antenna installation distance, signal source wavelength, frequency band and bearing angle. This study reduces the error of the phase bearing by using the phase delay of the relative phase difference for the signals incident on the two antennas. Through simulation, we analyzed the object direction detection performance of the proposed method and the existing method. Three targets are detected from the [-15°, 0°, 15°] direction. The existing method detects the target at [-13°, 3°, 17°], and the proposed method detects the at [-15°, 0°, 15°]. As a result of the simulation, the target detection direction of the proposed method is improved by 2 degrees compared to the existing method.

Analytical BER Expression of the Optimal Single User Detection of a BPSK Signal in the Presence of a Gaussian CCI (가우시안 동일 채널 간섭하에서 BPSK 신호의 최적 단일 사용자 검출의 정확한 BER 수식)

  • Chung, Kyuhyuk
    • The Journal of Korean Institute of Communications and Information Sciences
    • /
    • v.39A no.9
    • /
    • pp.491-496
    • /
    • 2014
  • We derive an analytical expression for the bit-error rate (ber) of optimal single user detection (osud) of a binary phase-shift keying (bpsk) signal corrupted by a gaussian cochannel interferer (cci). the channel capacity is also calculated to investigate the ber performance.

우리나라 의용생체공학의 현황과 전망

  • 이충웅
    • Journal of Biomedical Engineering Research
    • /
    • v.10 no.2
    • /
    • pp.83-88
    • /
    • 1989
  • This paper is a study on the design of adptive filter for QRS complex detection. We propose a simple adaptive algorithm to increase capability of noise cancelation in QRS complex detection with two stage adaptive filter. At the first stage, background noise is removed and at the next stage, only spectrum of QRS complex components is passed. Two adaptive filters can afford to keep track of the changes of both noise and QRS complex. Each adaptive filter consists of prediction error filter and FIR filter The impulse response of FIR filter uses coefficients of prediction error filter. The detection rates for 105 and 108 of MIT/BIH data base were 99.3% and 97.4% respectively.

  • PDF

The Design of Reliable Graphics-DTV Signal Converter Using EDAC Algorithm in DTV System

  • Ryoo, Dong-Wan;Lee, Jeun-Woo
    • 제어로봇시스템학회:학술대회논문집
    • /
    • 2003.10a
    • /
    • pp.2126-2130
    • /
    • 2003
  • In the integrated systems, that is integrated digital TV(DTV) internet and home automation, like home server, is needed integration of digital TV video signal and computer graphic signal. The graphic signal is operating at the high speed and has time-divide-stream. So the re-request of data is not easy at the time of error detection. therefore EDAC algorithm is efficient. In this paper, we show a scheme, that is integration of graphic and dtv format signal for DTV monitor display. This paper also presents the efficiency error detection auto correction(EDAC) for conversion of graphics signal to DTV video signal. A presented EDAC algorithms use the modified hamming code for enhancing video quality and reliability. A EDAC algorithm of this paper can detect single error, double error, triple error and more error for preventing from incorrect correction. And it is not necessary an additional memory. In this paper The comparison between digital TV video signal and graphic signal, a EDAC algorithm and a design of conversion graphic signal to DTV signal with EDAC function in DTV system is described.

  • PDF

Features of an Error Correction Memory to Enhance Technical Texts Authoring in LELIE

  • SAINT-DIZIER, Patrick
    • International Journal of Knowledge Content Development & Technology
    • /
    • v.5 no.2
    • /
    • pp.75-101
    • /
    • 2015
  • In this paper, we investigate the notion of error correction memory applied to technical texts. The main purpose is to introduce flexibility and context sensitivity in the detection and the correction of errors related to Constrained Natural Language (CNL) principles. This is realized by enhancing error detection paired with relatively generic correction patterns and contextual correction recommendations. Patterns are induced from previous corrections made by technical writers for a given type of text. The impact of such an error correction memory is also investigated from the point of view of the technical writer's cognitive activity. The notion of error correction memory is developed within the framework of the LELIE project an experiment is carried out on the case of fuzzy lexical items and negation, which are both major problems in technical writing. Language processing and knowledge representation aspects are developed together with evaluation directions.

A Symbiotic Evolutionary Design of Error-Correcting Code with Minimal Power Consumption

  • Lee, Hee-Sung;Kim, Eun-Tai
    • ETRI Journal
    • /
    • v.30 no.6
    • /
    • pp.799-806
    • /
    • 2008
  • In this paper, a new design for an error correcting code (ECC) is proposed. The design is aimed to build an ECC circuitry with minimal power consumption. The genetic algorithm equipped with the symbiotic mechanism is used to design a power-efficient ECC which provides single-error correction and double-error detection (SEC-DED). We formulate the selection of the parity check matrix into a collection of individual and specialized optimization problems and propose a symbiotic evolution method to search for an ECC with minimal power consumption. Finally, we conduct simulations to demonstrate the effectiveness of the proposed method.

  • PDF

Error correction codes to manage multiple bit upset in on-chip memories (온칩 메모리 내 다중 비트 이상에 대처하기 위한 오류 정정 부호)

  • Jun, Hoyoon
    • Journal of the Korea Institute of Information and Communication Engineering
    • /
    • v.26 no.11
    • /
    • pp.1747-1750
    • /
    • 2022
  • As shrinking the semiconductor process into the deep sub-micron to achieve high-density, low power and high performance integrated circuits, MBU (multiple bit upset) by soft errors is one of the major challenge of on-chip memory systems. To address the MBU, single error correction, double error detection and double adjacent error correction (SEC-DED-DAEC) codes have been recently proposed. But these codes do not resolve mis-correction. We propose the SEC-DED-DAEC-TAED(triple adjacent error detection) code without mis-corrections. The generated H-matrix by the proposed heuristic algorithm to accomplish the proposed code is implemented as hardware and verified. The results show that there is no mis-correction in the proposed codes and the 2-stage pipelined decoder can be employed on-chip memory system.

PinMemcheck: Pin-Based Memory Leakage Detection Tool for Mobile Device Development (PinMemcheck: 이동통신 기기 개발을 위한 Pin 기반의 메모리 오류 검출 도구(道具))

  • Jo, Kyong-Jin;Kim, Seon-Wook
    • The KIPS Transactions:PartA
    • /
    • v.18A no.2
    • /
    • pp.61-68
    • /
    • 2011
  • Memory error debugging is one of the most critical processes in improving software quality. However, due to the extensive time consumed to debug, the enhancement often leads to a huge bottle neck in the development process of mobile devices. Most of the existing memory error detection tools are based on static error detection; however, the tools cannot be used in mobile devices due to their use of large working memory. Therefore, it is challenging for mobile device vendors to deliver high quality mobile devices to the market in time. In this paper, we introduce "PinMemcheck", a pin-based memory error detection tool, which detects all potential memory errors within $1.5{\times}$ execution time overhead compared with that of a baseline configuration by applying the Pin's binary instrumentation process and a simple data structure.

A study on the speckle noise removal and edge detection using gradient and symmetry (기울기와 유사성을 이용한 스페클 잡음 제거 및 경계선 검출에 관한 연구)

  • 홍승범;백종환
    • Journal of the Korean Institute of Telematics and Electronics S
    • /
    • v.34S no.11
    • /
    • pp.138-147
    • /
    • 1997
  • The ultrasonic images are corrupted by the granular pattern noise - a speckle noise. The speckle exist in the type of coherent imaging systems, and the speckle is the signal independent and multiplicative noise. In this paepr, we derive two filters using the gradient and symmetry. One is a noise suppression filter which removes noise while preserves the edges. It is named the ASRF-GS (Adaptive Speckle Removal Filer - Gradient and Symmetry). And the other is a edge detection filter which obtains the thin edge map, called the EDUGS(Edge Detection Using Gradient and Symmetry). The performance of the proposed noise suppression filter is evaluated by the IMPV(SNR improvement) and the Speckle Index(SI), and the perforamnce of the edge detection is evaluated by the edge detection error rate. According to the evaluated method, The SI reduced about 0.035, The IMPV improved about 1.265(dB), and the edge detection error rate is about 17.5%.

  • PDF

Synthesis of an On-Line 5 Degrees of Freedom Error Measurement System for Translational Motion Rigid Bodies (병진운동 강체의 온라인 5자유도 운동오차 측정시스템 설계 및 해석)

  • 김진상;정성종
    • Journal of the Korean Society for Precision Engineering
    • /
    • v.15 no.5
    • /
    • pp.93-99
    • /
    • 1998
  • Although laser interferometer measurement system has advantages of measurement range and accuracy, it has some disadvantages when measurement of multi degrees of freedom of motion are required. Because the traditional error measurement methods for geometric errors (two straightness and three angular errors) of a slide of machine tools measures error components one at a time. It may also create an optical path difference and affect the measurement accuracy. In order to identify and compensate for geometric errors of a moving rigid body in real time processes, an on-line error measurement system for simultaneous detection of the five error components of a moving object is required. Using laser alignment technique and some optoelectronic components, an on-line measurement system with 5 degrees of freedom was developed for the geometric error detection in this study Performance verification of the system has been performed on an error generating mechanism. Experimental results show the feasibility of this system for identifying geometric errors of a slide of machine tools.

  • PDF