• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.39 no.7
• /
• pp.12-21
• /
• 2002

In this paper, we propose a new hybrid ARQ scheme to consider real-time and non real-time services in a wireless ATM network. Real-time and non-real-time services require different error control schemes according to each service characteristics. Therefore, in the next generation mobile communication environments where these service scenarios should be deployed, hybrid ARQ scheme using RCPC code with variable coding rate becomes one of the most suitable solutions. Because the variable coding rate is applied according to traits of transmitted frame and channel status, hybrid ARQ scheme using RCPC code can expect UEP effect. The UEP scheme does not apply equal error protection level to all information, but does high error protection level to more important information. In Our scheme, UEP of high error protection level is applied to real-time service, and UEP of low error protection and retransmission techniques are applied to non real-time service. We show that the proposed hybrid ARQ scheme improves channel utilization efficiency and yields high error correction behaviors.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.17 no.11
• /
• pp.1311-1319
• /
• 1992

In the partial-band interference and Rayleigh fading environments, the bit error probability equation of FH/MFSK signal has been derived and the error rate has been evaluated. And the results are shown in graphs and discussed. Here, to improve the error rate performance the repeated diversity and the error-correction coding techniques are adopted. The degree of improvement of error rate performance has been found out in diversity and coding techniques respectively. In diversity case, repetition number is taken as a parameter and in coding case, as the error-correction codes Hamming code, BCH code, and convolutional code are introduced. From the obtained results, we have known that the increase of the number of repetition in diversity technique has been brought a little improvement of performance but the coding technique considerable improvement and in particular, convolutional code is very effective. Therefore, coding technique is considered to be better than repeated diversity to cope with Rayleigh fading and partial-band interference.

• Proceedings of the IEEK Conference
• /
• 2001.09a
• /
• pp.959-962
• /
• 2001

Turbo codes of long block sizes have been known to show very good performance in an AWGN channel and the turbo code has been strongly recommended as error correction code for IMT-2000 in 3GPP(3rd Generation Partnership Project). Recently, turbo codes of short block sizes suitable for real time communication systems have attracted a lot of attention. Thus, in this paper we consider the turbo code of 1/3 code rate and short frame size of 192 bits in ITU-R channel model. We analyzed the performance of W-CDMA systems of 10MHz bandwidths employing RAKE receiver with not only MRC diversity but also turbo code.

• Journal of Communications and Networks
• /
• v.11 no.6
• /
• pp.564-573
• /
• 2009

In this paper, we consider a wireless multiple path network in which a transmitting node would like to send a message to the receiving node with a certain probability of success. These two nodes are separated by N erasure paths, and we devise two algorithms to determine minimum redundancy and optimal symbol allocation for this setup. We discuss the case with N = 3 and then extend the case to an arbitrary number of paths. One of the algorithms minimum redundancy algorithm in exponential time is shown to be optimal in several cases, but has exponential running time. The other algorithm, minimum redundancy algorithm in polynomial time, is sub-optimal but has polynomial worstcase running time. These algorithms are based off the theory of maximum-distance separable codes. We apply the MRAET algorithm on maximum-distance separable, Luby transform, and Raptor codes and compare their performance.

• Proceedings of the IEEK Conference
• /
• 2001.06a
• /
• pp.217-220
• /
• 2001

Turbo codes of long block sizes have been known to show very good performance in an AWGN channel and the turbo code has been strongly recommended as error correction code for IMT-2000 in 3GPP(3$^{rd}$ Ceneration Partnership Project). Recently, turbo codes of short block sizes suitable for real time communication systems have attracted a lot of attention. Thus in this paper we consider the turbo code of 1/3 code rate and short frame size of 192 bits in ITU-R channel model. We analyzed the performance of W-CDMA systems of 10MHz bandwidths employing RAKE receiver with not only MRC diversity but also turbo code..

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2009.05a
• /
• pp.485-488
• /
• 2009

The class of BCH codes is a large class of error correction codes. HDL implementation of BCH code generator to change code rate. and used System Generator, and implemented hardware to FPGA. Loaded bit stream to a FPGA board in order to verify this design to Hardware co-simulation from these results. Also, compared as investigated the maximum action frequency through timing analysis and resource of logic in order to evaluate performance of BCH code generator.

• Journal of IKEEE
• /
• v.23 no.4
• /
• pp.1288-1294
• /
• 2019

The channel-achieving property made the polar code show to advantage as an error-correcting code. However, sufficient error-correction performance shows the asymptotic property that is achieved when the length of the code is long. Therefore, efficient architecture is needed to realize the implementation of very-large-scale integration for the case of long input data. Although the most basic fully parallel encoder is intuitive and easy to implement, it is not suitable for long polar codes because of the high hardware complexity. Complementing this, a partially parallel encoder was proposed which has an excellent result in terms of hardware area. Nevertheless, this method has not been completely generalized and has the disadvantage that different architectures appear depending on the hardware designer. In this paper, we propose a hardware design scheme that applies the proposed systematic approach which is optimized for bit-dimension permutations. By applying this solution, it is possible to design a generalized partially parallel encoder for long polar codes with the same intuitive architecture as a fully parallel encoder.

• Journal of Communications and Networks
• /
• v.15 no.2
• /
• pp.198-206
• /
• 2013

Recent advances in forward error correction (FEC) coding techniques were focused on addressing the challenges of multicast and broadcast delivery. However, FEC approaches can also be used for unicast content delivery in order to solve transmission control protocol issues found in wireless networks. In this paper, we exploit the error resilient properties of Raptor codes by proposing Raptor-based content delivery protocol (RCDP) - a novel solution for reliable and bidirectional unicast communication in lossy links that can improve content delivery in situations where the wireless network is the bottleneck. RCDP has been designed, validated, optimized, and its performance has been analyzed in terms of throughput and resource efficiency. Experimental results show that RCDP is a highly efficient solution for environments characterized by high delays and packet losses making it very suitable for intelligent transport system oriented applications since it achieves significant performance improvements when compared to traditional transport layer protocols.

• Journal of Satellite, Information and Communications
• /
• v.9 no.2
• /
• pp.110-113
• /
• 2014

In this paper, we address a problem of finding the optimum inner and outer code rates for a concatenated code in Gaussian binary symmetric channels. Clearly, as the inner code rate decreases, the error detection capability of the inner code increases. However, decreasing the inner code rate implies a decrease in error-correction capability of the outer code when overall code rate is fixed. With this notion in mind, we examine the optimum distribution of redundancy on the outer and inner codes to achieve a maximum performance gain in the concatenated coding scheme. Our analysis shows that the maximum coding gain can be obtained when the inner code rate is maximized and the outer code rate is minimized under the constraint of total code rate is fixed.

• Journal of the Institute of Electronics Engineers of Korea CI
• /
• v.44 no.3
• /
• pp.68-73
• /
• 2007

Recently, WSN(wireless sensor networks) consists of several sensor nodes in sensor field. And each sensors have the enforced energy constraint. Therefore, it is important to manage energy efficiently. In WSN application system, FEC(Forward error correction) increases the energy efficiency and data reliability of the data transmission. LDPC(Low density parity check) code is one of the FEC code. It needs more encoding operation than other FEC code by growing codeword length. But this code can approach the Shannon capacity limit and it is also can be used to increase the data reliability and decrease the transmission energy. In this paper, the author adopt Linear-Congruence method at generating parity check matrix of LDPC(Low density parity check) codes to reduce the complexity of encoding process and to enhance the energy efficiency in the WSN. As a result, the proposed algorithm can increase the encoding energy efficiency and the data reliability.