• 대한기계학회논문집B
• /
• 제26권6호
• /
• pp.772-778
• /
• 2002

A numerical analysis of turbulent gas-particle two-phase flow is performed in conjunction with the experiments of Fackrell ＆ Robins and Raupach & Legg that considered ground-level source and/or elevated source flat plate flow. K-$\omega$ turbulence model is used in order to analyze fully turbulent flow field and the concentration equation with settling velocity is adopted for the concentration field. The model of Einstein and Chien is applied that couples the velocity field and the concentration field. Turbulent eddy viscosity is re-evaluated in this model. The present numerical results have good agreement between the simulation and the experimental data for the mean flow velocities and particle concentrations. While the previous study shows about 27% error in the vicinity of the source of particle concentration, the .present study allows about 14% error. A new turbulent gas-particle flow model developed by this study is able to cut down error by 13% at a near source.

• 한국정보통신학회논문지
• /
• 제3권3호
• /
• pp.541-546
• /
• 1999

자유 공간에서 음원으로부터 사람의 귀로 음향적인 전단 과정을 표현하는 머리전달함수는 사람이 음원의 위치를 판단할 수 있는 중요한 정보를 포함하고 있으며, 이를 이용하여 실질적으로는 존재하지 않는 음원을 근사적으로 생성할 수 있는 입체 음향 시스템을 구현할 수 있다 그러나 개인의 것이 아닌 일반적인 머리전달함수를 사용함으로 인해 앞뒤 판정 오차, 고도 판정 오차와 같은 음상 정위 능력이 저하된다. 이 논문에서는 머리전달함수의 스펙트럼 놋치(notch) 레벌을 증가시켜 수직면상에서의 앞뒤 판정 오차와 고도 판정 오차를 줄였다. 제안된 방법의 성능을 정지된 음원과 움직이는 음원에 대하여 주관 평가를 통해 증명하였다.

• Journal of Positioning, Navigation, and Timing
• /
• 제3권4호
• /
• pp.163-170
• /
• 2014

A pseudolite is used as a GPS backup system, and is also used for the purpose of indoor navigation and correction information transmission. It is installed on the ground, and transmits signals that are similar to those of a GPS satellite. In addition, in recent years, studies on the improvement of positioning accuracy using the pseudorange measurement of a pseudolite have been performed. As for the effect of the time synchronization error between a pseudolite and a GPS satellite, a time synchronization error of 1 us generally induces a pseudorange error of 300 m; and to achieve meter-level positioning, ns-level time synchronization between a pseudolite and a GPS satellite is required. Therefore, for the operation of a pseudolite, a time synchronization algorithm between a GPS satellite and a pseudolite is essential. In this study, for the time synchronization of a pseudolite, "a pseudolite time synchronization method using the time source of UTC (KRIS)" and "a time synchronization method using a GPS timing receiver" were introduced; and the time synchronization performance depending on the pseudolite time source and reference time source was evaluated by designing a software-based pseudolite time synchronization performance evaluation simulation platform.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2000년도 추계학술대회논문집
• /
• pp.384-388
• /
• 2000

One-port acoustic characteristics of an in-duct source can be measured by the multi-load method using an overdetermined set of open pipes with different lengths as applied loads. The input data. viz. load pressure and load impedance, are usually contaminated by measurement error in the actual measurements, which result in errors in the calculated source parameters. In this paper, the effects of the errors in the input data on the results have been studied numerically, varying the number of loads and their impedances in order to determine what combination of the loads will yield the best result. An error analysis is applied to each case of possible loads, which consist of open pipes. It is noted that, frequently, only a set of open pipes is used when applying the multi-load method to the intake or exhaust sides of internal combustion engines. A set of pipe lengths which cause the calculated results to be least sensitive to the input data error can be found when using open pipe loads. The present work is intended to produce guidelines for preparing an appropriate load set in order to obtain accurate source properties of fluid machines.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 1998년도 춘계학술대회논문집; 용평리조트 타워콘도, 21-22 May 1998
• /
• pp.670-677
• /
• 1998

Many of the adaptive noise control systems utilize a form of the least mean square (LMS) algorithm. In the active control of noise, it is common practice to locate an error microphone far from the control source to avoid the near-field effects by evanescent waves. Such a distance between the control source and the error microphone makes a certain level of time-delay inevitable and, hence, may yield undesirable effects on the convergence properties of control algorithms such as filtered-x LMS. This paper discusses the dependence of the convergence rate on the acoustic error path in these popular algorithms and introduces new algorithms which increase the convergence region regardless of the time-delay in the acoustic error path. Performances of the new LMS algorithms are presented in comparison with those by the conventional algorithms based on computer stimulations and experiments.

• 대한전자공학회논문지SD
• /
• 제43권10호
• /
• pp.61-67
• /
• 2006

본 논문에서는 Poly-Si의 불규칙한 Grain boundary 분포로 인해 발생하는 문턱전압의 변화에 대해서도 일정한 전류를 흘려줄 수 있는 전류원을 제안하였다. 기존의 문턱전압 보상 전류원에 비해 넓은 입력전압 범위에서도 포화영역의 특성이 매우 향상되었으며 문턱전압의 변화에 따른 전류의 오차를 감소시킬 수 있었다. 마지막으로 HSPICE 시뮬레이션 과정을 통해 Poly-Si TFT의 특성곡선과 제안된 전류원의 특성곡선을 비교하였으며 각각의 입력전압에 대한 문턱전압의 변화에 따른 출력전류의 상대오차를 측정하였다.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2010년도 추계학술대회 논문집
• /
• pp.319-320
• /
• 2010

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2001년도 하계종합학술대회 논문집(1)
• /
• pp.333-336
• /
• 2001

This paper reports that the Lambert W function applies to a non-iterative design of minimum mean square-error scalar quantizers for a Laplacian source. The contribution of the paper is in the reduction of the time needed for the design and the increased accuracy in resulting quantization points and thresholds, because the algorithm is non-iterative and the Lambert W function can be evaluated as accurately as desired.

• 한국군사과학기술학회지
• /
• 제6권1호
• /
• pp.59-67
• /
• 2003

Multipath is an inevitable error source in radio navigation system such as GPS, it causes signal tracking errors such as carrier tracking errors, code tracking errors. Since code tracking error is a dominant error in absolute positioning, this paper focuses on the improvement of code tracking performance. This paper proposes a method that detects the change of autocorrelation function's slope and mitigates the multipath error. Also, this paper shows the performance evaluation results by post-processing the digitized RF samples.

• 대한기계학회논문집A
• /
• 제22권3호
• /
• pp.688-694
• /
• 1998

The ability to locate the defects in materials is one of the major attrations of the acoustic emission(AE) technique. The most conventional method for planar AE source localization is to place three or more AE sensors on the plate and to determine the source position by measuring the differences in the arrival times of the AE wave at the sensors, which is called as triangulation method. But this method can not be applied in the material of which elastic wave propagtion velocity is not known. In this paper, we propose two methods, vector method and error minimization method, for AE source location on the material with unknown AE wave velocity. In this method, it is not needed to know the propagation velocity previously, that is, we can apply this method to arbitrary material of which properties are not known exactly. Also, in this paper, the robustness to the error in the measurement of time differences are discussed for both methods. Finally, in order to evaluate the actual performances, experiments using a pencil lead break as the AE source were carried out on the aluminum plate.