• Proceedings of the IEEK Conference
• /
• 2000.09a
• /
• pp.951-954
• /
• 2000

In this paper, we present a multi-code parallel combinatory CDMA system using bi-orthogonal modulation to reduce envelope variation and improve bit error. .rate (BER) performance. In general, the dynamic range of the amplitude of the transmit signal is very large in the case of conventional multi-code CDMA systems, resulting in severe nonlinear distortion due to high power amplifier and thus significant BER performance degradation. The proposed system exhibits reduction of peak-to-average power ratio (PAPR) of the transmit signal amplitudes and significant performance improvement. We verify the performance of the proposed system by computer simulations under AWGN channel and flat fading channel.

• Proceedings of the KIPE Conference
• /
• 2001.10a
• /
• pp.346-350
• /
• 2001

PMSM drives are widely used in the industrial and residential applications because of high efficiency, high power density and high performance. For better performance of PMSM, however, torque ripples should be reduced. This paper investigates a reduction of torque ripple due to the unsinusoidal flux linkage produced by the shapes of stator slot and magnetic pole. To minimize torque ripple, a simple flux estimator is proposed. This method interatively compensates the distributed flux linkage from an error between the measured and estimated currents. The proposed algorithm is verified through simulation.

• Proceedings of the KIPE Conference
• /
• 2003.07a
• /
• pp.415-419
• /
• 2003

This paper focuses on a simple technique to reduced torque ripple in the direct torque control inverter for PMSM drive. It is actually impossible to raise the inverter switching frequency in the conventional system, although the hysterisis bandwidths for the stator flux and torque control are sufficiently diminished, because of the sampling Interval and the delay in estimating the flux and the torque In order to overcome the problem, the proposed method introduces a dithering technique into the conventional system by superposing triangular waves with high frequency and minute amplitude on the torque error. And the programable 3- stage lowpass filter is added instead of pure Integrator. Simulation results prove the feasibility of proposed strategy compared with conventional method.

• Journal of the Korean Institute of Telematics and Electronics B
• /
• v.33B no.5
• /
• pp.33-40
• /
• 1996

In this paper, we propose the discrete model reduction method of bounded real transfer functions. From the discrete bounded real lemma, we obtain the two riccati equations and define the disrete bounded real balancing using solutions of these two riccati equations. And we get the reduced order discrete model from the GSPA of full order model. Especially, when free parameter of GSPA is .+-.1, we show that the reduced order discrete model retains minimality, stability, and bounded real and BR-balancing properties. And we derive the .inf.-norm error bound between full order model and reduced order model. Finally to illustrate the validity of proposed method, we give an example.

• International Journal of Fuzzy Logic and Intelligent Systems
• /
• v.4 no.1
• /
• pp.1-6
• /
• 2004

This paper deals with a balanced model reduction for T-S(Takagi-Sugeno) fuzzy systems with time varying state delay. We define a generalized controllability gramian and a generalized observability gramian for a stable T-S fuzzy delayed systems. We obtain a balanced state space realization using the generalized controllability and observability gramian and obtain a reduced model by truncating states from the balanced state space realization. We also present an upper bound of the approximation error. The generalized controllability gramian and observability gramian can be computed from solutions of linear matrix inequalities. We demonstrate the efficacy of the suggested method by illustrating a numerical example.

• Proceedings of the KSME Conference
• /
• 2004.11a
• /
• pp.799-804
• /
• 2004

Dynamic characteristic of CD/DVD deck for vehicle is analyzed in this paper. Generally CD/DVD deck for vehicle is used from inferior environment with the vibration of the vehicle and shock of outside and so on. Therefore it must have the structure which is stabilized from the vibration to prevent read error. For this purpose, vibration characteristic of the deck for vehicle should be identified. To analyze characteristic of the deck system, we perform the signal analysis and modal testing using the FFT analyzer. Also we change the design factor degrading the performance of the deck system and verify the efficiency improvement using the acceleration measurement occurring to the sound discontinuation.

• Proceedings of the Korean Society for Bioinformatics Conference
• /
• 2001.08a
• /
• pp.11-35
• /
• 2001

For the last twenty years fragment assembly in DNA sequencing followed the "overlap - layout - consensus"paradigm that is used in all currently available assembly tools. Although this approach proved to be useful in assembling clones, it faces difficulties in genomic shotgun assembly: the existing algorithms make assembly errors and are often unable to resolve repeats even in prokaryotic genomes. Biologists are well-aware of these errors and are forced to carry additional experiments to verify the assembled contigs. We abandon the classical “overlap - layout - consensus”approach in favor of a new Eulerian Superpath approach that, for the first time, resolves the problem of repeats in fragment assembly. Our main result is the reduction of the fragment assembly to a variation of the classical Eulerian path problem. This reduction opens new possibilities for repeat resolution and allows one to generate error-free solutions of the large-scale fragment assemble problems. The major improvement of EULER over other algorithms is that it resolves all repeats except long perfect repeats that are theoretically impossible to resolve without additional experiments.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.14 no.3
• /
• pp.201-207
• /
• 2004

High speed rotating airflow inside a HDD chamber causes sub-micron scale disk vibration that could generate significant TMR problems in most of current HDD products. Many publications are presented for the reduction of airflow excitation. One of the most effective methods widely adopted in high-end HDD products is SqueezeAir Bearing Plate (SABP). However, because of its tight assembly clearance between the damper and disk, this method could not be easily implemented in volume production. This article presents a disk damper design that is modified to be feasible for volume production by virtue of a new airflow modeling method.

• Journal of information and communication convergence engineering
• /
• v.9 no.2
• /
• pp.224-229
• /
• 2011

Cellular Automata is a discrete dynamical system that can be completely described in terms of local relation. For any given image, the system can save its features as well as increase or decrease the brightness of it locally through consideration of optimized transition in succession. These transitions in succession satisfy the function "Lyapunov" and have sequential movements. This study suggests the way of noise reduction for each image with the use of the Sequential Cellular Automata system. The mentioned transition in succession gives stable results with high-convergence performance to random noises and PSNR (Peak Signal-to-Noise Ratio) using histograms and MSE (Mean Square Error) for verification of effectiveness.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.31 no.2A
• /
• pp.187-193
• /
• 2006

Multicarrier systems has major shortcomings due to the large numbers of subcarrier. One of the shortcomings is the high peak-to-average power ratio(PAPR), which causes nonlinearity distortion in the transmitter, and degrades the performance of the system significantly. Partial transmit sequence(PTS) is one of the best approaches that can significantly improve the statistics of the PAPR of an orthogonal frequency division multiplexing(OFDM) signal. Guided scrambling(GS) is an extension of self-synchronizing scrambling. It is also capable of guiding the scrambling process to produce a balanced encoded bit stream. In this paper, we propose a sub-optimal algorithm to optimize the phase factor in PTS. In addition, we integrate GS coding with this method. The proposed Hybrid algorithm can get much more PAPR reduction at the expense of incur a few error extension and do not require transmission of side information.