• Journal of the Ergonomics Society of Korea
• /
• v.5 no.2
• /
• pp.3-9
• /
• 1986

The present paper deals with obtaining the proper application criteria for the control mode, by using computer graphic simulation, in order to recover the error effectively occurring in the practical supervisory contol work of hyman-robot system. In these experiments the opteations by human and by control program are performed as control modes for recovering the error. And then we compare and analyze tow control modes taking task error and task time as performance measures and task difficulty as a variable factor. Consequently as the task difficulty increases, the task error in the operation by hyman tends to be less than in the operation by control program and the task time is superior in the operation by control program. Therefore, we suggest that two control modes should be used jointly for recovering the error and the operation by control program should be applied in major fraction of control and the operation by human in minor fraction of control.

• Proceedings of the Computational Structural Engineering Institute Conference
• /
• 1994.10a
• /
• pp.95-102
• /
• 1994

This paper presents a Cable Stayed Bridge Construction Management System, which consists of Structural System Identification Method (SSIM), Error Sensitivity Analysis and Optimum Error Adjustment & Prediction System. The 1st System Identification Method builds an error influence matrix using the linear superposition of each error modes. The 2nd SSIM also considers the second error mode term, which shows good error factor estimation. The optimal cable adjustment can be accomplished within the allowable range of both cable tension and camber. The Post processor, constituted with Motif and GL library on SGI platform, is useful for monitoring construction stage management by displaying construction data, adjustment and prediction results at each construction step.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.10 no.2
• /
• pp.248-255
• /
• 2009

Error is the major problem in communication system. Absolute circuit is one of the most important building blocks to implement for the error measurement in communication system as well as in analog circuit design. The main goal of this paper is to design a circuit with high accuracy and minimum error performance. In this paper, a new current mode absolute circuit is implemented to calculate the absolute value of two signals. This new design shows enhanced performance and low distortion over the previous implementation. The proposed circuit is simulated using Hspice and implemented in analog viterbi decoder. It is very suitable for implementing in error calculation for the large scale integrated circuit. Hspice simulation results of previous and new one circuit are reported.

• Journal of Institute of Control, Robotics and Systems
• /
• v.5 no.4
• /
• pp.379-384
• /
• 1999

In this paper, we present a new time-varying sliding surface to achieve fast and robust tracking of higher-order uncertain systems. The surface passes through an initial error, and afterwards, it moves towards a predetermined target surface by means of a variable named by sliding surface gain and its intercept. Specifically, the sliding surface gain is determined so that its initial value can minimize a shifting distance of the surface and that the system roots in sliding mode can follow certain stable trajectories. The designed sliding mode control forces the system errors to stay always on the proposed surface from the beginning. By this means, the system remains insensitive to system uncertainties and disturbances for the whole time. To illustrate the effectiveness of the proposed method, the comparative study with conventional time-invariant sliding mode control is performed.

• 제어로봇시스템학회:학술대회논문집
• /
• 2004.08a
• /
• pp.488-492
• /
• 2004

In this paper, the design of a speed sensorless vector control system for induction motor is performed by using a new sliding mode technique based on current model flux observer. A current and flux observer based on the current estimation error is constructed. The proposed current observer includes a sliding mode function, which is derivative of the flux. That is, sliding mode observer which allows the estimation of both the rotor speed and flux based on the measurement of motor terminal quantities, would be proposed. And, a synergetic speed controller using the estimated speed signal is designed to stabilize the speed loop. Simulation results are presented to confirm the theoretical analysis, and to show the system performance with different observer gains and the influence of the motor parameter.

• Proceedings of the KIPE Conference
• /
• 2016.07a
• /
• pp.173-174
• /
• 2016

This paper proposes a comparison of Voltage Oriented Control (VOC) and Direct Power Control (DPC) under command mode transition for PMSG Wind Turbines (WT). Based on a neutral point clamped three level back to back type Voltage Source Converter (VSC), proposed control scheme automatically control the generated output power to satisfy a grid requirement from the hierarchical wind farm controller. Automatic command mode transition based on the dc-link voltage error provides a command mode changing between grid command and MPPT mode. It is confirmed through PLECS simulations in Matlab. Simulation result shows that proposed control scheme of VOC and DPC achieves a much shorter transient time of generated output power than the conventional control scheme of MPPT with optimal torque control and VOC under a step response. The proposed control scheme makes it possible to provide a good dynamic performance for PMSG wind turbines in order to generate a high quality output power.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.19 no.1
• /
• pp.99-110
• /
• 1995

An industrial robot needs a simple and robust control algorithm obtaining high precision control performance in spite of disturbance and parameter's change. In this paper, for solving this problem, a new sliding mode control algorithm is proposed and applied to the trajectory control of a SCARA type robot. The proposed algorithm has diminished the chattering occurring in sliding mode by setting a dead band along the switching line on the phase plane. It shows that we can easily obtain a simple switching control input satisfying sliding mode in spite of regarding nonlinear terms of a manipulator and servo system as disturbance. A guideline for selection of dead-band width is determined by optimal value of cost function presenting magnitudes of chattering and error. By this algorithm, we can expect the high performance of the trajectory tracking of an industrial robot which needs a robust and simple algorithm.

• Transactions of the Korean Society of Machine Tool Engineers
• /
• v.15 no.5
• /
• pp.114-122
• /
• 2006

This paper presents a new control scheme that combines a sliding mode control and a neural network. In the proposed sliding mode control, a continuous control is employed removing the switching phenomena and the equivalent control within the boundary layer is estimated through on-line teaming of the neural network. The performances of the proposed control are compared with off-line neural network and on-line neural sliding mode control by computer simulation. The simulation results show that the proposed control reduces high frequency chattering and tracking error in example of the two link manipulator.

• Proceedings of the KIEE Conference
• /
• 1988.11a
• /
• pp.53-55
• /
• 1988

The application of Sliding Mode Control for inproving the dynamic response of a Multi-Phase-Bipolar (MPB) Brushless DC motor based position Brushless DC motor system is presented. Sliding Mode Control gives fast dynamic response with no overshoot and zero steady state error. It has the important feature of bins highly robust. A design procedure is outlined for the Sliding Mode Controller for a MPB Brushless DC motor. Digital computer simulation of the overall position control system is carried out using a time domain model in the d-q reference frame.

• Proceedings of the KIEE Conference
• /
• 1988.11a
• /
• pp.72-75
• /
• 1988

In the point-to-point motion on servo system, the control mode which minimizes the performance index including, the impact of end point, time and energy, is proposed. The proposed control mode applied to the feed-back control system of D.C motor and then had a computer simulation. This control mode had less the impact of end point, stedy state error, time and energy than the bang-bang or the saturating- proportional control mode.