• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2014.05a
• /
• pp.826-828
• /
• 2014

Recently trend of product is miniaturization. As a result, We need products surface as well as products internal defect inspection. Generally, Inspection products in production process uses a lot of optical inspection. However, This is difficult to internal inspection of products. We used optical device instead of X-ray generator. At the same time, We have developed system to determine the product defect. First, obtain X-ray image from Machine vision function. Next, Measured value is recognize suitability within error range. otherwise recognize defect. Results presence of defective products can be stored by user.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.17 no.7
• /
• pp.14-22
• /
• 2016

Because fuses have many parts, human error can occur during visual inspections. This paper proposes an automatic ammunition test algorithm for preventing human error during an inspection. The automatic ammunition test algorithm consists of the following three steps. First, the image input and preprocessing step is where an inspection image is rotated using an image rotation algorithm and the image is converted to a binary image. Second, the inspection step of arming determines if the ammunition is armed using Masked Template Matching algorithm, etc. Third, the inspection step of the parts determines if the parts are omitted using an image searching algorithm, etc. The arming or parts omission of the fuse are detected efficiently using the ammunition automatic test algorithm. The ammunition automatic test algorithm is expected to help improve the safety and reliability of 40 mm grenade fuse.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.19 no.7
• /
• pp.1737-1742
• /
• 2015

In the industrial field for product inspection needs not only on the surface of the product but also the internal components defect inspection. Generally, optical inspection is mainly used for item inspection from production process. However, this is only to check defect of surface it is difficult to perform inspection of goods internal. To overcome these limitations, Instead of optical device by using the portable X- ray DR image acquisition device system developed to obtain an image in real time at the same time and determine product defects. After obtaining the X- ray image, the inspection product within error range is passed after machine image processing. Also, the results and numbers are stored by users.

• Journal of Aerospace System Engineering
• /
• v.15 no.3
• /
• pp.57-64
• /
• 2021

In the study, to minimize the error on guided control of the KV (Kill Vehicle) and to secure the hit-to-kill performance, a position accuracy inspection for the DACS (Divert and Attitude Control System) actuation system was proposed. The accuracy performance of the DACS actuation system is one of the most important factors in the interception of ballistic missiles. In order to validate actuation control accuracy of DACS system, an inspection item was set for position accuracy, and the inspection system was designed for DACS pintle. To measure the absolute position value of the DACS pintle, an external measurement system was developed using laser displacement sensors. The inspection system was designed so that it can be compared with the actuation command in real time. The proposed position accuracy inspection system can be inspected not only in a DACS system but also in missile system level. The position accuracy inspection was performed using the designed inspection system, and analysis of the inspection result.

• Proceedings of the IEEK Conference
• /
• 2000.11d
• /
• pp.223-226
• /
• 2000

In this paper, we report detects system algorithm, adapted a perimetric mask and a generalized symmetry system, to detect a transformable material and find out a minute error cannot be noticed by a naked eye. In this thesis, supposed a stable detecting system applied a general image processing theory and perimetric mash algorithm to detect badness. And finally, detected some vague errors with the application of symmetry transform algorithm that accumulate a symmetry of minute error and put stress on it.

• Journal of Korean Society for Quality Management
• /
• v.22 no.3
• /
• pp.85-98
• /
• 1994

In current coordinate measuring machine practice, there are no commonly accepted sample sizes for estimating form errors which have a statistical confidence. Practically, sample size planning is important for the geometrical tolerance inspection using a coordinate measuring machine. We determine and validate appropriate sample sizes for form error estimation. Also, we develop form error estimation methods with certain confidence levels based on the obtained sample sizes in various form errors: straightness, flatness, circularity, and cylindericity.

• 제어로봇시스템학회:학술대회논문집
• /
• 1996.10a
• /
• pp.350-353
• /
• 1996

In this paper, based on the performance analysis of serial production lines with quality inspection machines, we develope an buffer size optimization method to maximize the production rate. The total sum of buffer sizes are given and a constant, and under this constraint, using the linear approximation method, we suggest a closed form solution for the optimization problem with an acceptable error. Also, we show that the upstream and downstream buffers of the worst performance machine have a significant effect on the production rate. Finally, the suggested methods are validated by simulations.

• Proceedings of the Korean Institute of IIIuminating and Electrical Installation Engineers Conference
• /
• 2005.05a
• /
• pp.437-442
• /
• 2005

In this paper, we proposed the 2-dimensional inspection algorithm for micro-BGA(Ball Grid Array) device using a vision system. The proposed method uses the subpixel algorithm for high precision. The proposed algorithm preferentially extracts the package area of device in the input image. After the extraction of package area, each ball areas are extracted by ball search window method. The parameters for inspection are calculated for the extracted ball area. In the simulation results, we have the average error within $17{\mu}m$.

• Proceedings of the KSME Conference
• /
• 2007.05a
• /
• pp.1553-1558
• /
• 2007

This paper presents a vision based autonomous inspection system for welding quality control of car sinking seat. In order to overcome the precision error that arises from a visible inspection by operator in the manufacturing process of a car sinking seat, this paper proposes the MVWQC (machine vision based welding quality control) system. This system consists of the CMOS camera and NI machine vision system. The image processing software for the system has been developed using the NI vision builder system. The geometry of welding bead, which is the welding quality criteria, is measured by using the captured image with median filter applied on it. Experiments have been performed to verify the proposed MVWQC of car sinking seat.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2003.06a
• /
• pp.1581-1584
• /
• 2003

This paper proposed efficient manufacturing system using OMM(on-machine measurement) system and OMM operating S/W based 3D modeler. A Developed program connected tool machine with RS232C. It is composed two operating system that touch probe operating and laser displacement sensor operating system. A program for touch probe possible measure considered inspection feature and CAD data. The laser operating program is used inspection for profile. very small hole using installed feature data. This system is applied manufacturing line of mold(cavity, core) also verification of efficiency manufacturing process that production, reduction machining error of each process