• Journal of the Korea Society for Simulation
• /
• v.29 no.3
• /
• pp.83-91
• /
• 2020

To use the OneSAF model for the analysis of Defence M&S, the most critical factor is the acquisition of input data. The model user is hard to determine the input data such as the probability of hit(P_h) and the probability of kill(P_k). These data can be obtained directly by live fire during the development test and the operational test. Therefore, this needs more time and resources to get the P_h and P_k. In this paper, we reviewed possible ways to obtain the P_h and P_k. We introduced several data producing methodologies. In particular, the error budget method was presented to convert the P_h(%) data of AWAM model to the error(mil) data of OneSAF model. Also, the conversion method which can get the adjusted results from the JMEM is introduced. The probability of a hit was calculated based on the error budget method in order to prove the usefulness of the given method. More accurate data were obtained when the error budget method and the projected area from the published photo were used simultaneously. The importance of the P_h calculation was demonstrated by sensitivity analysis of the P_h on combat effectiveness. This paper emphasizes the importance of determining the P_h data and improving the reliability of the M&S system though steady collection and analysis of the P_h data.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.21 no.1
• /
• pp.229-236
• /
• 2017

In general, an error budget of monopulse radar is proposed by manufacturer who assuming that all of external enviromental error resources such as multipath, glint, dynamic lag variation are removed. So until now, a measurement uncertainty of monopulse radar can be discussed including external enviromental error resources. In this paper, it is described that which kinds of error resource can effect on monopulse radar measurement uncertainty for different target property. To prove it experimentally, at first a simulation result is described assuming that all of external enviromental error resources are removed. It only includes receiver thermal noise. And then, monopulse radar measurement uncertainty estimation results tracking on calibration target which is fixed on specific position, calibration sphere which is moving slowly, weapon systems firing test which is moving fast are described quantitativly. All of these targets have different dynamic property.

• ETRI Journal
• /
• v.34 no.6
• /
• pp.838-846
• /
• 2012

This paper proposes a cost-effective hybrid-type power budget extender (PBEx) that can provide a high power budget of over 45 dB in an asymmetric 10-Gb/s Ethernet passive optical network (10/1G-EPON). The hybrid-type 10/1G-EPON PBEx comprises a central office terminal (COT) and remote terminal (RT) module supporting four channels and uses a coarse wavelength division multiplexing (CWDM) technology between the COT and RT for a reduction of fiber cost and efficient access network design. The proposed 10/1G-EPON PBEx can provide over a 40-km reach and 128-way split per CWDM wavelength with no modification of a legacy 10/1G-EPON system and can satisfy the error-free service in $10^{10}$ packet transmission.

• Journal of Astronomy and Space Sciences
• /
• v.18 no.3
• /
• pp.219-230
• /
• 2001

Far-ultraviolet IMaging Spectrograph (FIMS) is under development as the main pay-load of the first Korean science satellite, KAISTSAT-4. An extensive sensitivity and error budget analyses of FIMS optical system have been performed. As an way of estimating aggregate effects of all tolerances, a Monte Carlo simulation is used. The simulation result shows that the optical performance required from the science objectives is achieved within the probability higher than 99.9%.

• 제어로봇시스템학회:학술대회논문집
• /
• 2001.10a
• /
• pp.66.6-66
• /
• 2001

In this paper, we studied the error compensation using an error budget method for repeatability improvement of the precision positioning system. The precision positioning system is developed for micro-pressing machine. We performed the force and displacement analysis about parts of the system. Proposed system determines the position and orientation of the materials manufactured by micro-pressing machine. It is consisted of x-y-z linear stages setting the position, and the gripper system setting the orientation. We executed kinematic and dynamic modeling of the whole precision positioning system. By generalizing the design variables, precision positioning system has the flexibility of material dimension. As we tried an error compensation using ...

• 한국정보통신설비학회:학술대회논문집
• /
• 2008.08a
• /
• pp.469-472
• /
• 2008

In this paper, we discuss the recent trends on the passive UHF RFID tag chip design techniques and several important system parameters. We also summarize link budget studies on both conventional and modem UHF RFID communications. The paper highlights the reverse link limited case, which has known to be the minor concern if reader continuous wave (CW) can reach the tag in sufficient level. This makes sense when the tag sensitivity is rather high (over 10-12${\mu}W$); however, since the tag chip fabrication technologies have been developed by time, the tag chip threshold levels are now less-dominant in determining link margin. If the tag limitation can be alleviated, the forward link limited case can be resolved; thus, we rather focus on the path-loss problem. Since the path-losses are still exist in both forward and reverse links, and it can be doubled while CW travels the reader-tag-reader path because forward link and reverse link are on the same distance. Consider if reader receiver sensitivity is very high in the worst case. In this case, weaken tag response (i.e., backscatters) cannot reach the level that reader receiver can process tag data; bit-error rate can be higher. Overall, backscatter levels should be high enough so that reader receiver can correctly function. After discussing link budget, we carried out practical measurements on fading effects between two circularly polarized UHF RFID antennas in a small scale area.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.37 no.2
• /
• pp.71-79
• /
• 2019

Geolocation accuracy is one of the important factors in utilizing all weather available SAR satellite imagery. In this study, an error budget analysis was performed on key variables affecting on geolocation accuracy by generating KOMPSAT-5 simulation data. To perform the analysis, a Range-Doppler model was applied as a geometric model of the SAR imagery. The results show that the geolocation errors in satellite position and velocity are linearly related to the biases in the azimuth and range direction. With 0.03cm/s satellite velocity biases, the simulated errors were up to 0.054 pixels and 0.0047 pixels in the azimuth and range direction, and it implies that the geolocation accuracy is sensitive in the azimuth direction. Moreover, while the clock drift causes a geolocation error in the azimuth direction, a signal delay causes in the range direction. Monte-Carlo simulation analysis was performed to analyze the influence of multiple geometric error sources, and the simulated error was up to 3.02 pixels in the azimuth direction.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2001.11a
• /
• pp.58-64
• /
• 2001

An investigation of the TMR(Track Misregistration) requirements to achieve the capacity of 80GBytes／Platter in 7200rpm disk drive system is reported. This paper also gives an overview of the PES(Position Error Signal) characteristics in the 57,500TPI disk drive to estimate the required 95,000TPI-system PES. The TMR measured by PES are presented and decomposed in order to identify the portions and their contributions of the spindle-disk system vibration and HSA(Head-Stack-Assembly) system vibration respectively. A comprehensive review on the servo system is also presented to provide the practical limits of the modem servo architecture into TMR budget design. The decomposed PES energy distribution shows that the spindle-disk pack vibration is one of the top-ranking sources of the total TMR budget and its percentage contribution is about 50％ considering all the other TMR sources.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2018.05a
• /
• pp.22-22
• /
• 2018

본 연구에서는 수문학적 가뭄을 분석하기 위해 두가지 지수를 개발하여 소개하고자 한다. 첫번째는, 물수지식을 기반으로 산정된 Water Budget-based Drought Index(WBDI)로 강우와 증발산의 차이를 이용하여 산정한다. 두 번째는 에너지 수지식을 기반으로 산정된 Energy-based Water Deficit Index(EWDI)로 에너지 수지 기반의 증발산, 태양복사에너지와 토양수분 등을 이용하여 산정한다. 두가지 지수 모두 인공위성 영상 자료를 활용하였다. WBDI 산정을 위한 강수량 자료는 Tropical Rainfall Measuring Mission(TRMM)과 Global Precipitation Mission(GPM)를 활용하였으며, 증발산 자료는 Moderate Resolution Imaging Spectroradiometer (MODIS) 자료를 활용하였다. EWDI 산정에 필요한 입력자료는 모두 MODIS 자료를 활용하였다. 산정된 두 가뭄지수의 수문학적 가뭄 분석을 위해 자연유출지점인 6개 지점을 선정하여 유출량 자료와 비교하였다. 유출량 자료를 활용하여 Error matrix 기법을 적용하여 두 수문학적 가뭄지수의 우리나라에서의 적용성을 파악하였다.

• Korean Journal of Remote Sensing
• /
• v.17 no.2
• /
• pp.121-129
• /
• 2001

A DEM(digital elevation model) is generated from a SPOT panchromatic stereo-pair using automated algorithms over a 8 km$\times$10 km region around Mokpo city. The aims are to continue the accuracy assessment over diverse conditions and to examine the applicability of a SPOT DEM for coastal disaster monitoring. The accuracy is assessed with respect to three reference data sets: 10 global positioning system records, 19 leveling data, and 1:50,000 topography map. The planimetric error is 10.6m r.m.s. and the elevation erroer ranges from 12.4m to 14.4m r.m.s.. The DEM accuracy of the flat Mokpo region is consistent with that over a mountainous area, which supports the robustness of the algorithms. It was found that coordinate transformation errors are significant at a few meters when using the data from leveling and topographic maps. The error budget is greater than the requirements for coastal disaster monitoring. Exploiting that a sub-scene is used, the affine transformation improves the accuracy by 50% during the camera modeling.