• 한국측량학회지
• /
• 제34권3호
• /
• pp.309-317
• /
• 2016

토석류는 태풍이나 집중호우 등에 의해 산사태가 일어나 토석이 물과 함께 하류로 밀려 떠내려가는 현상을 의미한다. 특히 우리나라는 지형학적 특성상 전체 국토의 약 70%가 산지로 구성되어 있고 매년 6~8월 집중적으로 태풍이나 집중호우가 발생하여 이 시기에 발생한 산사태 및 대규모 토석류로 인한 인명피해는 전체 재난 사망자의 약 20%에 이르고 있다. 따라서 이러한 토석류의 발생 규모를 예측하기 위한 핵심적인 부분은 복잡한 3차원 지형에서의 토석류 거동, 침식 및 퇴적 메커니즘을 이해하여야 한다. 본 연구에서는 강원도 평창군의 실제 규모 토석류 실험 전후에 나타난 지형적인 변화 및 변화가 발생한 지역에서의 지형학적 특성 등의 정량적 변화 분석 등을 수행하였으며, 이를 위해 발생 전후의 정량적 변화를 관측할 수 있는 GSD 10cm LiDAR DEM 데이터를 조사에 활용하였다.

• 한국연안방재학회지
• /
• 제5권4호
• /
• pp.183-192
• /
• 2018

In recent years, coastal areas have been suffering from coastal erosion, such as destruction of coastal roads and military facilities. In this study, the Delft3D model was used to analyze the sediment transport pattern due to seasonal characteristics of summer and winter waves in Anmok beach of the East coast. Typhoon and high waves are mainly are coming from ENE direction in the summer season and the flows occur in the northward. In winter, high waves are incident from NE and the flows occur in the southward. These seasonal patterns were simulated by using Delft3D model. As for model input, reanalysis wave data of the past 38 years were used, and the seasonal patterns were analyzed by dividing the whole year into summer and winter season. The grid point of the 38 year reanalysis data is far from the Anmok beach, so the three model grid systems (wide grid -> intermediate grid -> detailed grid) are constructed. Most of the flows in the NW direction occurred in summer, but erosion and deposition was alternated along the coastline. In winter, sediment was deposited near Gangnung Port due to the southern flow and the southern port. Strong winter waves compared to summer tend to cause deposition around Gangnung Port throughout the year.

• 한국생산제조학회지
• /
• 제26권1호
• /
• pp.44-49
• /
• 2017

Titanium has been used in various fields due to its good corrosion and erosion resistance, and superior mechanical properties. The process for selective electro-deposition on a titanium surface using laser beam is proposed in this paper. The process consists of laser irradiation, electro-deposition, and ultrasonic cleaning. Laser irradiation can change the surface morphology of titanium. Through laser irradiation, the surface cleaning effect and a rough surface can be achieved. The surface roughness of titanium was measured according to the laser beam conditions. The characteristics of selective electro-deposition on titanium surface according to surface roughness are investigated by various analytical methods such as SEM, and EDS.

• 한국해양공학회지
• /
• 제16권4호
• /
• pp.7-12
• /
• 2002

This study is aimed to find the scouring mechanism at the toe of rubble mound structures. To investigate the characteristics of scouring in front of the structure, experiments were performed with regular waves in a 2-D flume. The results of this study are as follows. 1) It can be said the characteristics of incident wave causes rolling and sliding of armour block. The difference of wave pressure on the slope, internal flow as well as settlement of armour block due to the weight cause scouring. 2) It is observed that scouring depth at the toe increased when wave height or period increased. The location of ultimate scouring and deposition depth moved seaward when wave period increased. 3) The failure of rubble mound structure was caused by waves or scouring. Failure by erosion increased with high waves and long waves. 4) Using surf-similarity parameter including characteristics of incident waves and structure, scouring and deposition pattern were found and their limit was formulated.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2003년도 춘계학술대회 논문집
• /
• pp.1865-1868
• /
• 2003

This paper provides a new method for hybrid machining, particularly suited to micro fabrication applications such as micro point, micro line, micro structure, micro partition and so on. Developed micro fabrication process by electrical discharge machining (EDM) and electrical discharge deposition (EDD) with metal powder (Ti, Fe) has been studied to build TiC or FeC structure. Titanium powder or iron powder is supplied from working fluid (kerosene or de-ionized water with powder) and adheres on a workpiece by the heat and electric power caused by the electrical discharge. The use of a tool electrode is expected to keep powder concentration high in the gap between a workpiece and a tool electrode and to accrete powder material on the workpiece. The deposition is tried under various electrical conditions (workpiece. tool electrode, working fluid, discharge current, voltage and powder etc.). On the other hand. using electrical discharge machining (EDM) with the same tool electrode, it can be used as a removal process (cutting) by electro erosion at the same time. Therefore. this new method can do a hybrid machining to build up and down a structure with the workpiece.

• Journal of Forest and Environmental Science
• /
• 제32권2호
• /
• pp.212-218
• /
• 2016

The research was conducted windward of an irrigated Acacia amplicips Maslin windbreak established to protect As Salam Cement Plant from winds and moving sands. Two belts with approximate optical porosities of 50% and 20% were studied in River Nile State, Sudan. The research aimed at assessing the efficiency of the two belts in wind speed reduction and sand deposition. Research methods included: (i) estimation of optical porosity, (ii) measurements of windward wind speeds at a control and at distances of 0.5 h (h stands for windbreak height), 1 h and 2 h at two vertical levels of 0.25 h and 0.5 h, (iii) estimation of relative wind speeds at the three positions (distance and height) at windward and (iv) estimation of wind erosive forces and prediction of zones of sand deposition. Results show that while the two belts reduced windward wind speeds at the two levels for the three distances, belt II was more effective. Nearest sand deposition occurred at 2 h and 1h windward of belt II and belt I, respectively, at level 0.25 h. At level 0.5 h, sand was deposited only at 2 h windward of belt II and no sand deposition occurred windward of belt I. The study concludes that less porous windbreaks are more effective in reducing wind speed and in depositing sand in windward direction at a distance of not less than twice the belt height.

• 한국해양환경ㆍ에너지학회지
• /
• 제17권2호
• /
• pp.70-80
• /
• 2014

한국 남해안의 중심에 위치한 가막만의 퇴적 환경을 파악하기 위해 수치실험을 실시하였다. 가막만에서는 추계와 춘계에 퇴적량이 증가하는 반면, 하계와 동계에는 퇴적량이 감소하는 것으로 나타났다. 이러한 계절적 변화는 표층퇴적물 강열감량의 계절 변화와 정성적으로 일치하였다. 한편, 현장조사 결과에서 북동쪽과 남쪽에 위치한 두 개의 만구에서는 잔차류가 만내로 향하고 있고, 또한 만내에서는 대부분의 해역에서 퇴적이 침식에 비해 상대적으로 우세한 것으로 나타났다. 따라서, 가막만으로 유입된 오염물질들은 준설 등 특별한 이벤트가 없는 한 대부분 만내에 침강되어 퇴적할 것으로 판단되었다.

• 한국해양환경ㆍ에너지학회지
• /
• 제19권4호
• /
• pp.266-273
• /
• 2016

본 연구는 인공식생에 의한 파 에너지 저감과 해빈침식방지를 평가하기 위해서 2차원 수리모형실험을 수행하였다. 실험에서는 인공식생 유무 및 평상파/폭풍파 입사 조건의 규칙파 영향하에서 해빈단면 변화와 파고 반사율을 조사하였다. 주요 연구 결과로는 1) 인공식생이 없는 조건에서는 파 조건에 의해서 연안사주 높이가 증가하고 해안선의 후퇴가 나타났으나 2) 1B(폭=0.8 m) 또는 2B(폭=1.6 m)의 인공식생을 설치한 조건에서는 해안선의 전진 및 퇴적현상이 발생하였다. 이를 통해 인공식생이 해빈 단면에 영향을 줄 수 있으며 해빈침식방지공법으로써 적용가능함을 알 수 있었다.

• 한국수자원학회논문집
• /
• 제41권10호
• /
• pp.983-993
• /
• 2008

근래에 이상기상과 지구 온난화로 인한 해수면 상승과 해사채취, 난개발에 의해 국내외 연안역에 여러 형태의 침식피해가 발생되고 있다. 이에 대한 침식방지 및 보호대책 공법이 적용되고 있으나 큰 실효를 거두지 못하고 있다. 연안보호 구조물로 PC 콘크리트 호안블럭이 국내외 연안에 시공되고 있으나 대부분의 기존 구조물들은 사람의 접근성이 어려운 구조물로 시공되어 있어 친수성이 부족한 실정이다. 본 연구에서는 이런 점들을 보완하여 사람들의 접근성이 좋으면서 연안침식 방지 보호 능력이 우수한 친수성 호안공을 개발하고자 한다. 개발한 호안공의 성능과 기능의 확보를 위해 모형실험이 반사율, 파량, 월파고에 대해 수행되었다. 그 결과는 일반 계단형 보다 훨씬 좋은 결과를 나타냈다. 또한 호안공의 실용화를 위해 현장실험은 노출부 일단면의 식생실험과 해안역의 침식구간에 시공실험을 실시하였다. 후자의 경우는 실험구간에서 많은 양의 모래가 짧은 시간에 퇴적되어 연안침식 방지 및 보호용 친수 호안공으로서의 현장 적용성을 확인하였다.

• Ocean and Polar Research
• /
• 제40권2호
• /
• pp.87-98
• /
• 2018

It is widely known that infragravity waves can exert significant influence on wave run-up over beaches. Large run-ups can lead to overwash, flooding and severe coastal erosion. In spite of the importance of infragravity waves in relation to wave run-up and coastal erosion, few studies have been carried out with regard to the impact of infragravity waves on nearshore morphodynamics with respect to eastern beaches in Korea. The purpose of this study is to investigate the importance of infragravity waves in nearshore numerical modelling. For the study, XBeach model was set up to analyze morphodynamics in December 2016, in Ilsan beach which is located in Ilsan-dong, Ulsan Metropolitan City. After validation of the XBeach model, numerical experiments were conducted by using various directional spreading coefficients. As the directional spreading coefficients are increased, the effect of infragravity waves is also enhanced by narrowband frequency. With the increasing effect of infragravity waves, the amount of sediment transport is also increased and an erosion dominant pattern is found in the south part of Ilsan beach and a deposition pattern in the north part of the beach mainly due to the wave incident direction of NNE.