• Biomolecules & Therapeutics
• /
• 제29권5호
• /
• pp.545-550
• /
• 2021

Chemotherapy-induced alopecia and hair loss can be stressful in patients with cancer. The hair grows back, but sometimes the hair tends to stay thin. Therefore, understanding mechanisms regulating hair regeneration may improve the management of chemotherapy-induced alopecia. Previous studies have revealed that chemotherapeutic agents induce a hair follicle vascular injury. As hair growth is associated with micro-vessel regeneration, we postulated that the stimulation of angiogenesis might enhance hair regeneration. In particular, mice treated with 5-fluorouracil (5-FU) showed delayed anagen initiation and reduced capillary density when compared with untreated controls, suggesting that the retardation of anagen initiation by 5-FU treatment may be attributed to the loss of perifollicular micro-vessels. We investigated whether the ETS transcription factor ETV2 (aka ER71), critical for vascular development and regeneration, can promote angiogenesis and hair regrowth in a 5-FU-induced alopecia mouse model. Tie2-Cre; Etv2 conditional knockout (CKO) mice, which lack Etv2 in endothelial cells, presented similar hair regrowth rates as the control mice after depilation. Following 5-FU treatment, Tie2-Cre; Etv2 CKO mice revealed a significant reduction in capillary density, anagen induction, and hair restoration when compared with controls. Mice receiving lentiviral Etv2 injection after 5-FU treatment showed significantly improved anagen induction and hair regrowth. Two-photon laser scanning microscopy revealed that enforced Etv2 expression restored normal vessel morphology after 5-FU mediated vessel injury. Our data suggest that vessel regeneration strategies may improve hair regrowth after chemotherapeutic treatment.

• Journal of Oral Medicine and Pain
• /
• 제37권3호
• /
• pp.147-154
• /
• 2012

조혈줄기세포이식은 면역 결핍 질환, 자가 면역 질환, 악성 조혈 종양의 주된 치료법이다. 이종 조혈줄기세포이식의 주요한 합병증은 이식편대 숙주질환이다. 구강 점막 생검은 이식편대 숙주 질환의 확진과 치료계획 수립을 위해 필요하나 영양 결핍과 화학 요법으로 인해 전신상태가 불량한 환자에게 출혈과 균혈증을 일으킨다. 본 논문에서는 레이저를 이용한 최소 침습적 조직생검의 효능을 평가하였다. 모두 3개의 증례가 소개되었고 모든 환자의 의료 기록, 임상 사진, 조직병리학적 결과가 레이저를 이용한 조직생검의 효능을 평가하기 위해 검토되었다. 모든 환자는 생검 후 불편감이 없었고 심각한 합병증이 발생하지 않았다. 생검 조직의 질이 이식편대 숙주 질환을 확진하는 데에 적당했다. 구강 점막의 레이저를 이용한 최소 침습적 생검은 통상의 조직병리학적 생검에 비해 출혈을 일으키지 않아 감염과 균혈증, 술 후 흉터 생성을 줄이므로 이식편대 숙주 질환의 확진에 이로울 것이다.

• Korean Journal of Acupuncture
• /
• 제40권4호
• /
• pp.141-148
• /
• 2023

Objectives : The purpose of this study is to investigate on the application of the yttrium aluminum garnet (YAG) lasers for acupoints irradiation. Methods : We conducted a systematic search for peer-reviewed studies published from inception to November 2023, in the following electronic databases: PubMed, Scopus, and Web of Science in English, Science ON, Oriental Medicine Advanced Searching Integrated System (OASIS) and Research Information Sharing Service (RISS) in Korean, and China National Knowledge Infrastructure (CNKI) and Wanfang in Chinese, and Japan Science Technology Information Aggregator, Electronic (J-STAGE) and Citation Information by NII (CiNii) in Japanese. Inclusion criteria were original articles including clinical and experimental studies related with YAG lasers for acupoints including Ashi or meridian sinews. Results : Among the 8 selected studies, there were 7 studies on human subjects and 1 study on animals, 7 studies on Nd:YAG (1,064 nm) laser, and 1 study on Er:YAG (2,940 nm) laser. A total of 16 acupoints were used, 15 of which were in the face and 1 of which was located in the foot. In addition, there were two studies using Ashi. 4 studies looked at the effect of pain relief, 2 studies looked at safety, 1 study looked at changes in blood flow, and 1 study looked at the effect of skin care. There were no reported adverse events, and the YAG laser was confirmed to be safe and effective in pain relief, beautifying the skin, and increasing blood flow. Conclusions : We suggest that high intensity YAG lasers can be applied to laser acupuncture or laser moxibustion. YAG lasers are considered to be worth using for various clinical indications of Korean medicine because of photobiomodulation effects, analgesic action, and deep penetration depth. Further scientific research and clinical evidences should be warranted.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2000년도 춘계학술대회 논문집 디스플레이 광소자 분야
• /
• pp.197-200
• /
• 2000

All-optical NOR logic device was realized by use of two pump signals with a single wavelength and a semiconductor optical amplifier(SOA). Specially, Mach-Zehnder(MZ) modulator was used for an external modulation of the pump signals. To obtain the sufficient gain saturation of the SOA, pump signals are amplified by an Er-doped fiber amplifier(EDFA) at the input of the SOA. Pump and probe signals are obtained from a DFB laser diode(${\lambda}_p$=1554 nm) and a tunable laser diode(${\lambda}_s$=1535 nm), respectively. The operation characteristics of the NOR logic device are successfully measured and demonstrated at the modulation frequency of 4.83 MHz.

• 한국광학회:학술대회논문집
• /
• 한국광학회 2003년도 제14회 정기총회 및 03년 동계학술발표회
• /
• pp.130-131
• /
• 2003

수술용으로 쓰이는 치과용 레이저로는 Nd：YAG, $CO_2$, Er：YAG 레이저들이 있다. 치료 부위에 따라 두 가지 응용으로 나눌 수 있다. 잇몸의 절개 등은 주로 $CO_2$나 Nd：YAG 레이저를 이용하여 정밀하게 그리고 출혈을 최소로 하는 레이저의 장점을 살리면서 시술하고 있다. $CO_2$레이저의 경우 강한 열적 손상작용 때문에 출력 조사 시간을 짧게 하여 사용하며, 열적 손상력이 낮은 Nd：YAG 레이저는 화이버를 접촉식으로 하여 화이버의 작은 면적의 높은 광밀도를 이용하여 시술하고 있다. (중략)

• 한국광학회:학술대회논문집
• /
• 한국광학회 2001년도 제12회 정기총회 및 01년도 동계학술발표회
• /
• pp.214-215
• /
• 2001

최근 정보통신산업의 급격한 발달로 대용량의 멀티미디어 정보를 초고속으로 전달해야 할 필요성으로 인해 광전송시스템의 개발에서 수십 Gbps급 이상의 기술이 절실히 요구되고 있다. 특히 광통신 시스템이나 광계측 장비들과 결합이 쉽다는 잇점 때문에, 모드록킹된 광섬유 레이저에 대한 연구가 많이 진행되고 있다. 이러한 레이저의 제작에 있어서는 능동형 모드잠금 방식이 적합한데, 능동형 모드잠금 방식의 레이저는 수동형에 비해 안정되고 고반복률을 가진 펄스를 얻을 수 있으나 펄스폭은 상대적으로 길다. (중략)

• The Journal of Advanced Prosthodontics
• /
• 제13권3호
• /
• pp.180-190
• /
• 2021

Purpose. This study aimed to assess the influence of various micromechanical surface conditioning (MSC) strategies with or without coupling agent (silane) application on the micro-shear bond strength (µSBS) of resin- matrix ceramics (RMCs). Materials and Methods. GC Cerasmart (GC), Lava Ultimate (LU), Vita Enamic (VE), Voco Grandio (VG), and Brilliant Crios (BC) were cut into 1.0-mm-thick slices (n = 32 per RMC) and separated into four groups according to the MSC strategy applied: control-no conditioning (C), air-borne particle abrasion with aluminum oxide particles (APA), 2W- and 3W-Er,Cr:YSGG group coding is missing. The specimens in each group were further separated into silane-applied and silane-free subgroups. Each specimen received two resin cement microtubules (n = 8 per subgroup). A shear force was applied to the adhesive interface through a universal test machine and µSBS values were measured. Data were statistically analyzed by using 3-way ANOVA and Tukey HSD test. Failure patterns were scrutinized under stereomicroscope. Results. RMC material type, MSC strategy, and silanization influenced the µSBS values (P<.05). In comparison to the control group, µSBS values increased after all other MSC strategies (P<.05) while the differences among these strategies were insignificant (P>.05). For control and APA, there were insignificant differences between RMCs (P>.05). The silanization decreased µSBS values of RMCs except for VE. Considerable declines were observed in GC and BC (P<.05). Conclusion. MSC strategies can enhance bond strength values at the RMC - cement interface. However, the choice of MSC strategy is dependent on RMC material type and each RMC can require a dedicated way of conditioning.

• The Journal of Advanced Prosthodontics
• /
• 제6권1호
• /
• pp.8-13
• /
• 2014

PURPOSE. The purpose of this study was to evaluate whether surface treatments affect the translucency of laminate veneers with different shades and thicknesses. MATERIALS AND METHODS. A total of 224 disc-shaped ceramic veneers were prepared from A1, A3, HT (High Translucent) and HO (High Opaque) shades of IPS e.max Press (Ivoclar Vivadent) with 0.5 mm and 1.0 mm thicknesses. The ceramics were divided into four groups for surface treatments. Group C: no surface treatments; Group HF: etched with hydrofluoric acid; Group SB: sandblasted with 50-${\mu}m$ $Al_2O_3$; and Group L; irradiated with an Er;YAG laser. A translucent shade of resin cement (Rely X Veneer, 3M ESPE) was chosen for cementation. The color values of the veneers were measured with a colorimeter and translucency parameter (TP) values were calculated. A three-way ANOVA with interactions for TP values was performed and Bonferroni tests were used when appropriate (${\alpha}=0.05$). RESULTS. There were significant interactions between the surface treatments, ceramic shades and thicknesses (P=.001). For the 0.5-mm-thick specimens there were significant differences after the SB and L treatments. There was no significant difference between the HF and C treatments for any shades or thicknesses (P>.05). For the 1-mm-thick ceramics, there was only a significant difference between the L and C treatments for the HT shade ceramics (P=.01). There were also significant differences between the SB and C treatments except not for the HO shades (P=.768). CONCLUSION. The SB and L treatments caused laminate veneers to become more opaque; however, HF treatment did not affect the TP values. When the laminate veneers were thinner, both the shade of the ceramic and the SB and laser treatments had a greater effect on the TP values.

• The Journal of Advanced Prosthodontics
• /
• 제12권4호
• /
• pp.189-196
• /
• 2020

PURPOSE. The aim of the present study was to investigate the effects of surface treatments on the bond strengths between polymer-containing restorative materials and two dual-cure resin cements. MATERIALS AND METHODS. In the present study, rectangular samples prepared from Lava Ultimate (LU) and Vita Enamic (VE) blocks were used. The specimen surfaces were treated using CoJet sandblasting, 50 ㎛ Al₂O₃ sandblasting, % 9 HF (hydrofluoric) acid, ER,Cr:YSGG laser treatment, and Z-Prime. Dual-cure resin cements (TheraCem and 3M RelyX U 200) were applied on each specimen's treated surface. A micro-tensile device was used to evaluate shear bond strength. Statistical analysis was performed using the SAS 9.4v3. RESULTS. While the bond strength using TheraCem with LU or VE was not statistically significant (P=.164), the bond strength using U200 with VE was statistically significant (P=.006). In the TheraCem applied VE groups, Z-Prime and HF acid were statistically different from CoJet, Laser, and Sandblast groups. In comparison of TheraCem used LU group, there was a statistically significant difference between HF acid and other surface treatments. CONCLUSION. The bonding performance between the restorative materials and cements were material type-dependent and surface treatment had a large effect on the bond strength. Within the limitations of the study, the use of both U200 and TheraCem may be suggested if Z-prime was applied to intaglio surfaces of VE. The cementation of LU using TheraCem is suitable after HF acid conditioning of the restoration surfaces.

• 생명과학회지
• /
• 제20권9호
• /
• pp.1324-1331
• /
• 2010

Mifepristone (MIF)와 Tamoxifen (TAM)은 각각 전립선암과 유방암치료제로 오랫동안 사용되고 있다. MIF는 안드로겐수용체(AR) 양성인 세포와 음성이 세포 모두에서 세포사멸을 유도하며, TAM 은, 리간드-수용체작용 기작의 다양한 특성에 의하여 에스트로겐(ER) 양성인 세포뿐 만 아니라 다른 종류의 암세포에서도 세포사멸을 유도하는 것으로 알려져 있다. 본 연구에서는 AR 음성인 DU-145 전립선암세포에 있어서, MIF와 TAM의 세포독성이 세포 내 칼슘농도 변화에 기인된 세포사멸기작에 의한 것임을 보여준다. MIF와 TAM을 처리시 세포성장은 농도와 시간의존적으로 감소하였으며, confocal laser scanning microscopy (CLSM)과 fluorescence-activated cell sorting (FASC)로 세포를 분석한 결과 각각 MIF와 TAM을 2일간 처리한 세포에서 세포사멸이 진행되는 것을 관찰하였다. 세포독성효과를 비교했을 경우, TAM이 MIF 보다 강하게 작용하였다. MIF와 TAM을 처리한 세포 내 칼슘변화 측정 시, 칼슘농도 또한 처리 약물의 농도와 시간 의존적으로 증가하였다. 1.5 mM 칼슘배지와 칼슘제거된 배지에서의 실험결과를 비교한 바, 세포 내 칼슘증가는 외부로부터의 유입에 의한 것으로 생각된다. 세포독성효과와 마찬가지로 칼슘증대 효과 역시 TAM에서 뚜렷하게 나타났다. 수용체 매개 세포사멸기작의 초기에 관여하는 procaspase-8은 MIF 처리 시 뚜렷이 활성화 되었으나, TAM의 경우 활성화가 MIF의 경우에 비해 강하지 못하였다. 그러나, 세포사멸의 중추적인 역할을 하는 caspase-3은 TAM 을 처리한 세포에 있어서 활성 정도가 훨씬 높았다. 세포사멸과정의 중요한 조절 단백질인 Bcl-2 그룹단백질의 발현을 조사해 본 결과, 세포사멸 억제단백질인 Bcl-2의 발현은 MIF, TAM 처리 시 동일하게 감소한 반면, 촉진단백질인 Bax의 발현은 2-3배 가량 증대되었다. 이상의 결과로 보아 MIF와 TAM은 세포 내 칼슘조절을 통하여 세포사멸을 유도하나, 세포사멸의 초기단계는 MIF와 TAM이 서로 다른 경로를 경유할 가능성이 있는 것으로 생각된다.