• Advances in aircraft and spacecraft science
• /
• 제9권3호
• /
• pp.169-193
• /
• 2022

By the present paper, both experimental and analytical models have been proposed to study the vibration behavior of partially bio-sourced sandwich panel with orthogonally stiffened core. For a variable mass fraction of Alfa fibers from 5% to 15%, impregnated in a Medapoxy STR resin, this panel were manufactured by molding the orthogonally stiffened core then attached it with both skins. Using simply supported boundary conditions, a free vibration test was carried out using an impact hammer for predicting the natural frequencies, the mode shapes and the damping coefficient versus the fibers content. In addition, an analytical model based on the Higher order Shear Deformation Theory (HSDT) was developed to predict natural frequencies and the mode shapes according to Navier's solution. From the experimental test, we have found that the frequency increases with the increase in the mass fraction of the fibers until 10%. Beyond this fraction, the frequencies give relatively lower values. For the analytical model, variation of the natural frequencies increased considerably with side-to-thickness ratio (a/H) and equivalent thickness of the core to thickness of the face (h_s/h). We concluded that, the vibration behavior was significantly influenced by geometrical and mechanical properties of the partially bio-sourced sandwich panel.

• 한국초전도ㆍ저온공학회논문지
• /
• 제20권1호
• /
• pp.19-22
• /
• 2018

The thermal and electrical properties of the conductor are critical parametersfor the design and optimization of the superconducting magnet. This paper presents simulation code to analyze electrical and thermal stability characteristics of the second generation (2G) high-temperature superconductor (HTS) by varying copper stabilizer thickness. Two types of commercial 2G HTS coated conductor tapes, YBCO and GdBCO were used in this study. These samples were cooled by Liquid Nitrogen ($LN_2$) having boiling at 77.3 K and an equivalent electrical circuit model for them is choosen and analysed in details. Also, an over-current pulse test in which a current exceeding a critical current was performed. From the simulation results, the influences of the copper stabilizer thickness on the stability characteristics of these samples are presented.

• Imaging Science in Dentistry
• /
• 제51권3호
• /
• pp.261-269
• /
• 2021

Purpose: The aim of this study was to evaluate the radiopacities of various types of restorative materials with different thicknesses compared with enamel, dentin, and aluminum. Materials and Methods: Four bulk-fill resins, 2 hybrid ceramics, 2 micro-hybrid resin composites, 6 glass ionomer-based materials, 2 zinc phosphate cements, and an amalgam were used in the study. Twelve disk-shaped specimens were prepared from each of 17 restorative materials with thicknesses of 1 mm, 2 mm, and 4 mm (n=4). All the restorative material specimens with the same thickness, an aluminum (Al) step wedge, and enamel and dentin specimens were positioned on a phosphor storage plate and exposed using a dental X-ray unit. The mean gray values were measured on digital images and converted to equivalent Al thicknesses. Statistical analyses were performed using 2-way analysis of variance and the Bonferroni post hoc test(P<0.05). Results: Radiopacity was significantly affected by both the thickness and the material type (P<0.05). GCP Glass Fill had the lowest radiopacity value for samples of 1 mm thickness, while Vita Enamic had the lowest radiopacity value for 2-mm-thick and 4-mm-thick samples. The materials with the highest radiopacity values after the amalgam were zinc phosphate cements. Conclusion: Significant differences were observed in the radiopacities of restorative materials with different thicknesses. Radiopacity was affected by both the material type and thickness.

• Structural Engineering and Mechanics
• /
• 제89권4호
• /
• pp.411-420
• /
• 2024

The purpose of this research was to investigate the cyclic behavior of the D-shaped dampers (DSD). Similarly, at first, the numerical model was calibrated using the experimental sample. Then, parametric studies were conducted in order to investigate the effect of the radius and thickness of the damper on energy dissipation, effective and elastic stiffness, ultimate strength, and equivalent viscous damping ratio (EVDR). An analytical equation for the elastic stiffness of the DSD was also proposed, which showed good agreement with experimental results. Additionally, approximate equations were introduced to calculate the elastic and effective stiffness, ultimate strength, and energy dissipation. These equations were presented according to the curve fitting technique and based on numerical results. The results indicated that reducing the radius and increasing the thickness led to increased energy dissipation, effective stiffness, and ultimate strength of the damper. On the other hand, increasing the radius and thickness resulted in an increase in EVDR. Moreover, the ratio of effective stiffness to elastic stiffness also played a crucial role in increasing the EVDR. The thickness and radius of the damper were evaluated as the most effective dimensions for reducing energy dissipation and EVDR.

• 한국철도학회논문집
• /
• 제13권4호
• /
• pp.404-411
• /
• 2010

철도차량용 선형유도전동기(Linear Induction Motor, LIM) 축소-회전형 모델의 기본 설계 결과를 검증하기 위하여 LIM의 자기등가회로법을 이용한 파라미터 도출 및 특성 계산을 수행하였다. LIM의 경우, 자기등가회로상의 파라미터는 LIM의 전기자 코어와 2차측 알루미늄 도체판의 형상 및 공극에 대한 함수로써 표현이 가능하다. 즉 전기자 코어와 2차측 알루미늄 도체판의 형상 및 공극 변경에 의해 LIM의 특성이 크게 달라질 수 있다는 것을 의미한다. 따라서 본 연구에서는 철도차량용 LIM 축소-회전형 모델의 공극, 2차측 AL-Plate의 두께, 오버행 길이, 형상 변경에 따른 LIM 축소-회전형 모델의 자기등가회로 파라미터 및 특성의 변화 추세를 분석하여, 철도차량용 실모델 LIM 개발을 위한 기초 연구를 수행하였다.

• 대한토목학회논문집
• /
• 제33권2호
• /
• pp.729-737
• /
• 2013

콘크리트 포장의 환경하중은 온도하중과 수분하중으로 구분할 수 있으며, 이는 콘크리트 슬래브 내의 온도분포와 건조수축 및 크리프를 의미한다. 본 연구에서는 공항 콘크리트 포장의 역학적 설계에 필요한 환경하중을 산정할 수 있는 방법을 개발하였다. 먼저, 대상 지역과 설계 슬래브 두께를 결정한 후, 포장 온도 예측 프로그램을 사용하여 예측된 슬래브 깊이에 따른 콘크리트 온도분포를 등가선형 온도차이로 환산하였다. 기존 건조수축 예측 모형을 개선하여 지역별 상대습도를 고려하여 콘크리트의 건조수축을 예측한 후 부등건조수축 등가선형 온도차이로 환산하였다. 또한, 응력이완을 건조수축에 반영하였다. 결국, 온도에 의한 등가선형 온도차이와 수분에 의한 부등건조수축 등가선형 온도차이를 합하여 최종 환경하중인 총 등가선형 온도차이를 산정하였다. 적용 예를 보이기 위해 지역별 기상조건을 대표할만한 국내 민간공항 8곳 및 군공항 2곳의 환경하중을 본 연구에서 개발된 방법으로 계산하고 비교하였다.

• 대한전자공학회논문지SD
• /
• 제41권3호
• /
• pp.45-54
• /
• 2004

릿지 형태 CPW 진행파형 전계 흡수 광 변조기와 광 검출기의 구조에 있어서 마이크로파의 특성은 도파관을 형성하는 진성 영역의 폭, 두께, 신호전극과 접지 전극사이의 거리의 영향을 받게 된다. 이러한 요소들은 소자에 존재하는 캐패시턴스(C)와 인덕턴스(L)의 크기를 변화시키게 되며 마이크로파의 유효 굴절률과 특성 임피던스를 결정하게 된다. 하지만 기존의 논문들은 전계와 자계의 분포에 따라 마이크로스트립과 CPW로 각각 근사화하여 해석했다. 본 논문에서는 FDTD를 이용해 릿지형태 CPW 진행파형 구조의 마이크로파 특성을 분석하고 C와 L의 정량적인 값을 구했으며 이를 등가회로의 회로 소자로써 적용 시켰다. 등가회로에서 구해진 마이크로파의 특성은 FDTD 결과와 거의 일치함을 보였다.

• Journal of Radiation Protection and Research
• /
• 제47권2호
• /
• pp.86-92
• /
• 2022

Background: The present study investigated the radiation dose distribution of balloon kyphoplasty (BKP) among surgeons and medical staff, and this is the first research to observe such exposure in Japan. Materials and Methods: The study subjects were an orthopedic surgeon (n = 1) and surgical staff (n = 9) who intervened in BKP surgery performed at the National Hospital Organization Disaster Medical Center (Tokyo, Japan) between March 2019 and October 2019. Only disposable protective gloves (0.022 mmPb equivalent thickness or less) and trunk protectors were used, and no protective glasses or thyroid drapes were used. Results and Discussion: The surgery time per vertebral body was 36.2 minutes, and the fluoroscopic time was 6.8 minutes. The average exposure dose per vertebral body was 1.46 mSv for the finger (70 ㎛ dose equivalent), 0.24 mSv for the lens of the eye (3 mm dose equivalent), 0.11 mSv for the neck (10 mm dose equivalent), and 0.03 mSv for the chest (10 mm dose equivalent) under the protective suit.The estimated cumulative radiation exposure dose of 23 cases of BKP was calculated to be 50.37 mSv for the fingers, 8.27 mSv for the lens, 3.91 mSv for the neck, and 1.15 mSv for the chest. Conclusion: It is important to know the exposure dose of orthopedic surgeons, implement measures for exposure reduction, and verify the safety of daily use of radiation during surgery and examination.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2001년도 Proceedings ICPE 01 2001 International Conference on Power Electronics
• /
• pp.47-51
• /
• 2001

In this paper, we have explained electrical characteristics of a step-down Rosen type piezoelectric transformer for AC-adapter. When the electric voltage is applied to the driving piezoelectric vibrator polarized in the longitudinal direction, then output voltage is generated at the generating piezoelectric vibrator polarized in the thickness direction due to the piezoelectric effects. From the piezoelectric direct and converse effects, symbolic expressions between the electric inputs and outputs of the step-down piezoelectric transformer have derived with an equivalent circuit model. With the symbolic expressions, load and frequency characteristics have discussed through simulation. Output voltage and current from a 11-layered and a 13-layered piezoelectric transformers were measured under the various conditions of loads and frequencies. First we measured resonant frequency from impedance curve and got equivalent impedance value of the piezoelectric transformer from admittance plot. It was shown from experiments that output voltage has increased and resonant frequency has changed according to various resistor loads. Output current has decreased inversely proportional to changing of loads. Moreover, the measured values of output voltage and current are well agreed with the simulated values of the proposed equivalent circuit model.

• 한국전자파학회논문지
• /
• 제11권7호
• /
• pp.1240-1246
• /
• 2000

본 논문에서는 유한차분 시간영역 방법을 적용하여 단일 계단형 마이크로스트립 기판 불연속 구조를 해석하였으며, 이 결과를 사용하여 LC 등가회로를 구성하였다. 본 논문에서 제안된 구조는 마이크로스트립 선로의 길이 방향으로 계단형 기판 불연속을 가지며, 패치 안테나의 급전선, 회로 모듈간 연결 등에 적용될 수 있다. FDTD 해석결과는 HFSS를 이용하여 얻어진 결과와 비교하여 잘 일치함을 보였다. 개발된 등가회로는 S11과 S21 모두 2.4% 이내의 정확도를 가지며, 마이크로파 회로의 CAD 설계에 응용될 수 있다.