• Communications of the Korean Mathematical Society
• /
• v.33 no.4
• /
• pp.1367-1376
• /
• 2018

In practice, the density function of a random variable X is always unknown. Even its smoothness parameter is unknown to us. In this paper, we will consider a density smoothness parameter estimation problem via wavelet theory. The smoothness parameter is defined in the sense of equivalent Besov norms. It is well-known that it is almost impossible to estimate this kind of parameter in general case. But it becomes possible when we add some conditions (to our proof, we can not remove them) to the density function. Besides, the density function contains impurities. It is covered by some additive noises, which is the key point we want to show in this paper.

• Journal of Sensor Science and Technology
• /
• v.10 no.2
• /
• pp.86-90
• /
• 2001

A pyroelectric senior using P(VDF/TrFE) film for sensing materials has been fabricated and evaluated with other commercial pyroelectric sensors that use ceramic materials for sensing. The device was mounted in a TO-5 housing to detect infrared light of $5.5{\sim}14\;{\mu}m$ wavelength. The NEP (noise equivalent power) and specific detectivity $D^*$ of the device were $2.13{\times}10^{-8}\;W$ and $9.37{\times}10^6\;cm/w$ respectively under emission energy of $13\;{\mu}W/cm^2$ respectively. These result shows a better characteristics than other commercial pyroelectric sensors NEP $8.08{\times}10^{-7}\;W$ and $D^*$ $2.47{\times}10^5\;cm/w$.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.6 no.4
• /
• pp.39-46
• /
• 1998

For permanent magnet brushless DC motors used for high speed fuel pumps, torque ripple is an important origin of vibration, acoustic noise and speed fluctuation. In this paper, the output torque profile of a PM motor with one phase energized is decomposed into the commutation torque, the reluctance torque and the armature reaction torque according to their source origins. It verifies that the output torque profile is qualitatively equivalent to the BEMF profile for low reluctance motors. This paper discusses the effect of magnet pole shaping and magnet arc length on the output torque and torque ripple. A magnet edge shaping is proposed to design a trapezoidal BEMF motor without torque ripple, with minimal sacrifice of the maximum output torque.

• Journal of Digital Contents Society
• /
• v.5 no.3
• /
• pp.187-191
• /
• 2004

Rapid time variations of the mobile communication channel have a dramatic effect on the performance of multi-carrier modulation. This paper analyzed the bit error rate (BER) performance for multi-carrier code division multiple access (MC-CDMA) network, and derived the equivalent signal-to-total noise plus interference(SNIR) of MC-CDMA system in the reverse link, the performance of MC-CDMA/BPSK signal is evaluated taking into account the fraction of partial-band interference and interference power. and the effect of partial-band interference is comprehensively studied in order to further improve the Qos of multi-carrier multimedia system.

• Journal of KSNVE
• /
• v.4 no.2
• /
• pp.209-219
• /
• 1994

Classical method calculates the resonance frequency of Helmholtz resonator by postulating that there is a moving mass in neck and a stiffness which expresses the compressibility of cavity. This has been widely accepted as reasonable to determine the resonant frequency, provided that the wave length of interest is longer that any length scale of resonater. Nevertheless, it has been often recognized that this classical method sometimes does not well predict the resonant frequency. This paper decribes the way in which the dynamics of resonator very often does care about the detail geometries of resonator; location of the neck, diameter ratio of the neck to that of cavitty, length of resonator compared with that of neck, etc. This rather unexpected observations have been proved theoretically; 3 dimensional analysis of acoustic wave equation, as well as experimentally by comparing the resonant frequencies, transmission loss, and insertion loss of resonator.

• Journal of Institute of Control, Robotics and Systems
• /
• v.12 no.8
• /
• pp.810-817
• /
• 2006

This paper presents a rotational motion estimation and correction technique for digital image stabilization. An equivalent rotation model is derived so as to accommodate a combined rotational and the translational motion. Thanks to this simplification, the suggested estimation algorithm can directly find the rotational center using geometric characteristic of local motion vectors instead of using searching method. And we also present recursive version of frame to reference algorithm(FRA) for the real time implementation. The proposed DIS system does not require time consuming parameter searching process, while showing comparatively good performance compared with the previous ones. To show the effectiveness of the DIS scheme, the algorithm has been implemented on the DSP based hardware system and experimental results are also discussed.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.59 no.2
• /
• pp.471-475
• /
• 2010

This paper presents a frequency synthesizer using low voltage active inductor VCO(Voltage Controlled Oscillator). The low voltage active inductor VCO with feedback resistor increases its equivalent inductance and the quality-factor(Q). Under certain conditions, the low voltage active inductor with feedback resistor generates a negative resistance at the input. In this paper, the conditions for negative resistance are obtained by small signal analysis. The designed low voltage active inductor VCO covers a frequency band between 1059MHz and 1223MHz. The measured phase noise at 1.178GHz is -81.8dBc/Hz at 1MHz offset.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.15 no.1
• /
• pp.51-57
• /
• 1990

In this paper, We design the microwave integrated circuits for a broadband amplifier using elliptic filters and auxilliary networks at input and output. The input and output equivalent circuits of GaAs MESFET modeled unilaterally are adapted for analysis of this amplifier. The experimental results of this amplifier on 4~8GHz frequency range show that its gain, VSWR and noise figure are 10.5dB, 2.1:1 max. and 2.5dB max., repectively.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.9 no.1
• /
• pp.14-18
• /
• 2010

Car muffler has the role to form the exhaust gas from high temperature- pressure to lower level and reduce the generated noise. Because of this role, its durability decrease as deformation by heat is occurred. This study is to analyze the flow of exhaust gas inside muffler and its coupled thermal deformation with 3-D modeling and ANSYS. There is the fastest flow at the exit of muffler with the maximum velocity of 54 m/s. And the maximum deformation or equivalent stress is shown at this model respectively as 0.00435 mm or 3414.4 MPa by the influence of heat and pressure at part of intersection with inlet and body of muffler.

• Journal of electromagnetic engineering and science
• /
• v.15 no.1
• /
• pp.59-61
• /
• 2015

A wideband H-band detector operating near 300 GHz has been developed based on SiGe HBT technology. The detector consists of an on-chip antenna and a HBT differential pair for square-law detection. It showed responsivity of more than 1,700 V/W and noise equivalent power (NEP) smaller than $180pW/Hz^{0.5}$ for the measured frequency range of 250-350 GHz. The maximum responsivity and the minimum NEP were 5,155 V/W and $57pW/Hz^{0.5}$, respectively; both were obtained at 330 GHz with DC power dissipation at 9.1 W.