• Nuclear Engineering and Technology
• /
• 제38권7호
• /
• pp.689-696
• /
• 2006

For a perforated plate, it is challenging to develop a finite element model due to the necessity of the fine meshing of the plate, especially if it is submerged in fluid. This necessitates the use of a solid plate with equivalent material properties. Unfortunately, the effective elastic constants suggested by the ASME code are deemed not valid for a modal analysis. Therefore, in this study the equivalent material properties of a perforated plate are suggested by performing several finite element analyses with respect to the ligament efficiencies.

• Structural Engineering and Mechanics
• /
• 제55권3호
• /
• pp.583-603
• /
• 2015

There are so many applications of perforated pates with various penetration patterns. If they are penetrated regularly, it can be represented by solid plate with equivalent material properties, which has a benefit of finite element modelling and reducing computation time for the analysis. Because the equivalent material properties suggested already are not proper to be applicable for the dynamic analysis, it is necessary to extract the equivalent material properties for the dynamic analysis. Therefore, in this study, the equivalent modulus of elasticity are obtained for the perforated plate with a triangular penetration pattern by comparing the natural frequencies of the perforated plate with those of solid plate, which are represented with respect to the ligament efficacy. Using the equivalent material properties suggested, the modal analyses of the partially perforated rectangular plate with a triangular penetration pattern are performed and its applicability is shown by comparing natural frequencies of perforated and homogeneous solid plates from finite element method and analytical method.

• 한국압력기기공학회 논문집
• /
• 제15권1호
• /
• pp.8-17
• /
• 2019

Perforated plates are used for the steam generator tube-sheet and the Reactor Vessel Closure Head in the Nuclear Power Plant. The ASME code, Section III Appendix A-8000, addresses the analysis of perforated plates, however, this analysis is only limited to the flat plate with a triangular perforation pattern. Based on the concept of the effective elastic constants, simulation of flat and spherical perforated plates and their equivalent solid plates were carried out using Finite Element Analysis (FEA). The isotropic material properties of the perforated plate were replaced with anisotropic material properties of the equivalent solid plate and subjected to the same loading conditions. The generated curves of effective elastic constants vs ligament efficiency for the flat perforated plate were in agreement with the design curve provided by ASME code. With this result, a plate with spherical curvature having perforations can be conveniently analyzed with equivalent elastic modulus and equivalent Poisson's ratio.

• 대한기계학회논문집A
• /
• 제29권4호
• /
• pp.518-525
• /
• 2005

The electromagnetic noise generates when natural frequencies of a stator core with wingdings and frame coincide with or approach natural frequencies of the magnetic motive force. In order to suppress such noise, the estimation of natural frequencies of the motor is important at the design stage. However, the natural frequency analysis is not so easy because motor stator is in the laminated plate structure and windings are composed of wires, insulation sheets and vanishs. Thus the accurate prediction of the equivalent material properties of windings becomes an essential task. In this paper, we derive the equivalent material properties using homogenization methods.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2012년도 추계학술대회 논문집
• /
• pp.777-778
• /
• 2012

• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 1997년도 가을 학술발표회 논문집
• /
• pp.1-7
• /
• 1997

Equivalent thermal conductivities and elasticity properties of woven fabric composites are computed using homogenization technique. The computational results show that the strength and thermal conductivity linearly increase with fiber volume fraction and that the variations of undulation of fibers has little effect on equivalent material properties. Homogenization technique is proved useful in the study of woven fabric composites and may find a lot more applications in the area.

• 한국음향학회지
• /
• 제30권7호
• /
• pp.368-376
• /
• 2011

압전복합체는 낮은 음향 임피던스와 높은 전기-기계 결합계수를 가지는 장점으로 인해 광대역 음향 트랜스듀서의 개발에 널리 활용되고 있으나, 구조의 복잡성으로 인해 이를 이용한 각종 트랜스듀서의 설계에 많은 제약이 있어왔다. 본 논문에서는 1-3형 압전복합체의 등가물성을 도출하여, 압전복합체와 동일한 특성을 가지는 균질한 단일 상의 물질로 대체하는 방법을 제안하였다. 압전복합체의 다양한 진동모드에서의 공진특성을 정확히 나타낼 수 있는 등가물성 도출을 위해 공진법과 유한 요소 해석법을 이용하였다. 제작한 1-3형 압전복합체 시편과 유한요소해석 모델의 주파수 특성을 비교하여 본 논문의 등가물성도출 방법의 타당성을 검증하였으며, 등가물성을 각 공진 모드별 단일상의 유한요소 해석 모델들에 적용하여 도출한 물성값의 정확성을 분석하였다.

• 한국음향학회지
• /
• 제30권8호
• /
• pp.436-445
• /
• 2011

본 논문에서는 2-2형 압전복합체의 등가 물성 도출에 관해 연구하였다. 먼저 2-2 압전복합체의 특성 변화를 유한요소법으로 해석하였고, 해석 결과와 2-2 압전복합체 시제작품의 특성 측정 결과를 비교하여 유한요소해석의 타당성을 검증하였다. PZT-5H와 고분자재료로 구성된 압전복합체의 단일상 등가물성은 Asymptotic Averaging Method를 이용하여 도출하였고, 도출된 물성을 다양한 진동 모드의 단일상 공진자 유한요소 모델에 대입한 후 완전한 2-2 압전복합체와의 임피던스 스펙트럼 차이를 최소 자승법을 이용하여 보정함으로써, 도출된 등가 물성값의 정확성을 향상시켰다. 본 연구에서 도출한 2-2 압전복합체의 등가 물성은 향후 다양한 음향 센서의 설계에 유용하게 사용될 수 있을 것이다.

• 대한기계학회논문집A
• /
• 제22권3호
• /
• pp.588-594
• /
• 1998

Reliable three-dimensional models of woven fabric composites had scarcely been proposed for their geometric complexity. Simplified models, mostly one- or two-dimensional, currently used are not considered effective enough because of their oversimplifications. In this paper, the equivalent thermal conductivities and elasticity properties of woven fabric composites are computed using homogenization technique. The computational results show that the strength and thermal conductivity linearly increase with fiber volume fraction and that the variations of undulation of fibers has little effect on equivalent material properties. Homogenization technique is proved useful in the study of woven fabric composites and may find a lot more applications in the area.

• 산업경영시스템학회지
• /
• 제37권1호
• /
• pp.157-164
• /
• 2014

The usage of corrugated cardboard for packing material is increasing in these days because it is light and easy to manufacture packing boxes. However, the structure analysis of packing boxes, made of cardboard, is not well carried. The reason can be deduced that its mechanical properties for structure analysis are not well known. The cardboards are made different shapes with various types of raw materials that are paper-based compound. In addition, the cardboards are considered to be orthotropic material. This research finds mechanical properties of triple layered cardboard which is composed of outer liner and inner liner. The moduli of elasticity and of shear for liners are found from tension test and T-Peel test. The mechanical properties of the cardboard are calculated using the super position method and equivalent evaluation method.