• 대한기계학회논문집A
• /
• 제23권11호
• /
• pp.1912-1921
• /
• 1999

The equipments mounted on guided-missile undertake heavy vibrational disturbance. Sometimes the equipments mounted on guided-missile go wrong so that the guided-missile flies over unintended place. For the vibration isolation of the equipments mounted on guided-missile, active vibration control was performed. In the case of active vibration technique, the stiffness matrix and the mass matrix are derived based on FEM (ANSYS5.0). Model reduction was carried out and, as a result, we got 7 DOF mass and stiffness matrix. For the sake of FEM model identification, modal experiment was carried out. With the help of Sensitivity Analysis, the natural frequencies of FEM were tuned to those of Experiment. In this work, the Sky Hook and the LQG control theory were adopted for v iteration control using stacked piezoactuator. Experiments were performed with changing excitation frequency from 10 Hz upto 200 Hz and we got frequency response function of guided-missile equipments. The magnitude of 3rd mode of guided-missile equipments is 8.6 % that of Uncontrolled in Skyhook controller and is 3.4 % that of uncontrolled in LQG controller.

• 한국병원경영학회지
• /
• 제12권1호
• /
• pp.31-50
• /
• 2007

This study was carried out to analyze the present condition of high-price medical technologies in South Korea and to compare it with OECD countries. This study included 10 high-price medical equipments and used medical equipment registry data of Health Insurance Review Agency. The major findings of this study are as follows; Firstly, The number and growth of high-price medical equipments in South Korea is much higher than those in other OECD countries. There are many of high-price medical equipments even in clinics. Secondly, the percentage of old poor-quality medical equipments is very high, especially in clinics. This is because of high-price of medical equipments. The results of this study implicated that there is high possibility of inappropriate use of high-price medical technologies. This may result in the increase of health expenditure; therefore, there should be a kind of regulation policy to control amount and quality of medical equipment.

• 조명전기설비학회논문지
• /
• 제23권5호
• /
• pp.36-41
• /
• 2009

본 논문에서는 건축물 전기설비의 IEC 60364를 기반으로 개발된 점검기법을 이용하여 실태 조사를 실시하였다. 점검기법 개발을 위한 분석대상은 기술기준에 준하여 시공된 국내 건축전기설비와 IEC 60364로 시공된 건축전기설비를 대상으로 차이점을 분석하였다. 측정 요소는 Loop impedance, 차단기 동작특성, 보호도체의 연속성을 측정하였다. 조사결과 국내 건축전기설비의 경우 TT시스템과 유사하지만 보호도체의 연속성에 문제가 있었다. TN-C-S로 시공된 건축전기설비의 경우 시공은 정확하게 되어 있었으나 담당자의 IEC 60364와 관련된 이해가 부족한 상태였다.

• 한국소음진동공학회논문집
• /
• 제20권9호
• /
• pp.797-804
• /
• 2010

In case of the construction equipment using by the military camp, such equipments are different from those equipments using at general construction site, of which muffler(silencer) is attached at the passenger seat side, since such equipments are obsoleted, it is great part that a considerably loud noises are continuously diffusing. When working, such noise can be influenced a lot of effects to those working soldiers nearby the equipment, and though it is really terrible loud noise as much as can arise a civil complaints by neighboring civilians, but because its specialty of the military, it is real state that there are many difficulties in establishing an effective soundproof countermeasure due to study shortage and lack of the relevant material regarding to military construction equipment. Accordingly, this study has ever grasped the characteristics of noise by its each frequencies and by distances about those 9 kinds of construction equipments using chiefly by the military camp. As the result, it was known that the military construction equipment is generating the loud noise which can influence bad effect to the workers, and such high sound pressure level of low frequency band can harm even to far distance.

• 한국식품영양학회지
• /
• 제26권3호
• /
• pp.578-590
• /
• 2013

The subject study was targeted towards nutrition teacher (dietitian) of elementary, middle, and high schools in Seoul areal. In addition, this study was to investigate the current status of school foodservice securement facilities & equipments and to analyze the obstructive factors for executing the HACCP system. The aim of this study was to provide base-line data so that a more efficient & effective sanitary management system for school foodservise can be settled in. All surveys were distributed and collected via email. A total of 305 survey papers were collected and out of these, 300 school results were analyzed and the results are as follows. The order of the securement facilities & equipment furnished were pre-handing equipments>washing>cooking>inspection>facilities>storage>space area>distribution equipments. The awareness of obstructive factors in executing the HACCP system was a total of 3.17 points and the order was as follows. The general obstructive factors>obstructive factors in the cooking staff executing the HACCP system>collaboration between the school/team leaders and the budget supporting department>obstructive factors in the nutrition teacher (dietitian) executing the HACCP system. School foodservice securement facilities & equipments in Seoul area must be renovated and modernized so as to improve its current situation. Furthermore, leadership programs are necessary to enhance nutritionists' understanding of the HACCP system and the cooking staff's competencies in instructing and supervising.

• 한국지열·수열에너지학회논문집
• /
• 제12권2호
• /
• pp.13-18
• /
• 2016

Energy saving has been main concern, thus government supporting policies which are based on Fundamentals of Low-carbon Green Growth Act', 'Green Building Support Act, have been prepared in Korea. The objective of this study is to estimate energy conservation effectiveness and economic advantage assuming that lighting equipments and heat source equipments would be retrofitted. Office building, which has total floor area of $30,000m^2$, was a subject of this study. From the estimations, electric rate will be decreased by 62,886,000 won per year due to lighting equipments retrofit, and gas rate will be decreased 11,141,000 won or 17,332,000 won per year due to heat source equipments retrofit (in case of COP 1.2 or 1.5). Payback period of each case that are calculated by energy saving cost and retrofit cost are estimated 27.9 year, 38.6 year and 29.2 year, thus economic supporting policies is necessary for effective energy saving in buildings. Meanwhile payback period of heat source equipment for new building is estimated 6.1 year and 8.3 year.

• 반도체디스플레이기술학회지
• /
• 제11권4호
• /
• pp.13-18
• /
• 2012

The semiconductor equipments generate a lot of data traffic via communication channels for the effective manufacturing processes of semiconductors and for the automation of semiconductor equipments. These data should be sent to a host computer in order to keep in a safe. The IEEE 802.11e specification gives differentiated and distributed access to a wireless communication medium with four access categories. These four access categories use different priority parameters which lead to quality of service in data traffic. In this paper, it is shown that the throughput of data depends upon the priority parameters provided by IEEE802.11e. We implement the usage of priority parameters in the SECS protocol for semiconductor equipments. It is necessary that the data from semiconductor equipments should be classified with certain priority for the effective use of our proposed method. Therefore, our scheme will contribute to improving the performance of the manufacturing processes of semiconductors.

• 설비공학논문집
• /
• 제21권11호
• /
• pp.591-598
• /
• 2009

The service quality with the various building equipments tends to depend on the individual superintendent's capability and efforts generally and this often lead to poor maintenances and managements of them. N-BMS(Networked Building Management System), proposed in this study, is a new type of building management method, which links principal equipments within many buildings into a communication network and carries out several significant missions such as fault detection, deterioration diagnosis and control the equipments and so on, as well as monitoring which is the main and unique purpose of the conventional BMS. How to construct the N-BMS was considered to keep performance of equipments high and thus to save energy and resource. LCC(Life Cycle Cost) based analysis was also performed in order to verify the effects of some maintenance and management works for the building HVAC systems.

• 전자공학회논문지SC
• /
• 제41권6호
• /
• pp.61-66
• /
• 2004

최소한의 피폭선량으로 고품질의 영상진단정보를 제공하기 위하여 노후화 및 불량인 장비를 선량과 해상력을 이용하여 평가하며, 국내특수의료장비 법제화를 위한 실태파악을 토대로 국내실정에 맞는 기준치를 개발하는 것이 논문의 목적이다. 전국 29개병원에 설치되어 있는 혈관조영장비 46대를 대상으로 입사선량율(EER) 및 입력형광면조사선량(IPER)을ion chamber로 측정하였고, Burger Rose 팬텀을 사용하여 투시영상의 저대조도 해상력을 측정하였다. 현재 대학병원 및 종합병원에서 사용되는 혈관조영 장비의 현상태를 파악함으로써 장비의 노화정도를 예측하고 부적절한 장비의 사용제한을 목적으로 종합평가 결과의 통계치로1안(1)과 2안(2)으로 구분하여 기준안을 작성하였다. 해상력 및 선량으로 장비를 조사하였을 때, 91%의 혈관조영X-선 장치가 기준 이상의 성능을 갖추고 있었으며 기준 미달의 장치의 경우 병원에서 교체를 검토하고 있음을 확인할 수 있었다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2004년도 하계학술대회 논문집 C
• /
• pp.2031-2033
• /
• 2004

In this paper, electromagnetic wave environment generated from electronic equipments was investigated. Since the main source of electromagnetic waves are electronic equipments, the field intensity of a harmful electromagnetic wave was measured and its harmful level was analyzed. It was also found that the result was 23%${\sim}$38% in case of TV set and microwave oven. Based on this analysis, this study proposed efficient shielding method to suppress unwanted electromagnetic wave.