• 전기학회논문지P
• /
• 제64권4호
• /
• pp.251-255
• /
• 2015

Chiller system plays an important role of maintaining room temperature constantly by supplying chilled water to Heating, Ventilating and Air Conditioning(HVAC)or area room cooler equipment during plant normal operation or accident condition. Chiller failures are one of the most frequently occurring equipment failures. If the types of chiller failures are analyzed and grouped thoroughly, it would be helpful to make chiller maintenance strategy at the plants. That would enhance equipment reliability of chiller in the end. In this paper, chiller failure data during three years were analyzed and categorized by specific failure code. In addition, the various proposals to improve equipment reliability of chiller were suggested such as Preventive Maintenance Optimization(PMO) strategy and performance monitoring reinforcement and so on.

• 한국신뢰성학회지:신뢰성응용연구
• /
• 제16권3호
• /
• pp.245-253
• /
• 2016

Purpose: The purpose of this study is to measure the reliability of complex equipment. Reliability of product is one of the most important factor to achieve competitiveness in the market. While there were many researches for assessing the reliability on components and modules, research on quantitative assessment tool for equipment with many component was little because of equipment's complexity. Methods: In this article, we developed index to assess reliability management system by using IEC 60300 and Reliability Management Tool-kit. With MIR and BARS, we developed reliability index clauses relevant to reliability activities and found weight factor for each clause by survey on experts. Results: The results of this study were as follows; reliability index that can assess both management side and technology side of the company was developed. Conclusion: Using this index, we assessed the reliability of a manufacturing equipment and found out the current reliability level of the manufacturing equipment, and derived improvement points.

• 한국정보통신학회논문지
• /
• 제22권9호
• /
• pp.1220-1227
• /
• 2018

항공전자장비는 항공기에 탑재되는 전자장비를 의미한다. 항공전자장비의 고장은 항공기 운용에 중대한 영향을 미칠 뿐만 아니라 조종사와 승객의 안전까지 위협할 수 있다. 이에 항공전자장비는 타 용도로 사용되는 전자장비들 보다 높은 신뢰성과 안전성을 가지도록 요구도로 규정되어 있다. 항공전자장비는 설계 초기 단계에서부터 안전과 관련된 요구사항 충족을 위해 부품 선정과 시스템 설계를 고려해야 한다. 본 논문에서는 항공전자장비의 안전성, 신뢰성 성능 분석 방법을 설명하고, 안전 요구 성능 충족을 위해 수행할 수 있는 여러 설계 개선 방법을 실제 항공전자장비 개발 사례를 들어 소개한다. 마지막으로 설계 개선된 항공전자장비의 안전 성능 수치를 재분석하고, 개선 전 값과 비교하여 제시한 설계 변경의 유효성을 입증하였다.

• 품질경영학회지
• /
• 제49권2호
• /
• pp.113-125
• /
• 2021

Purpose: This study focused on reality and quality improvement of aviation security equipment performance certification system. Methods: For this propose, we analyzed aviation security equipment performance certification system related legislations. Using analyzed data, we suggested advancement plan of aviation security equipment performance certification system. Results: In results, South Korea has been implementing aviation security performance certification system since October 2018. Parts for improvement of system are mutual certification with major countries that operate aviation security equipment performance certification systems, the spread of the defense industry's system, development of similar substances for handling explosives, and introduction of preliminary inspections. Conclusion: The research result could be used as a basic data for upgrading Korea's aviation security performance certification system.

• 대한안전경영과학회지
• /
• 제6권2호
• /
• pp.231-239
• /
• 2004

To keep an enterprise's competitiveness on the condition of the automatic manufacturing system such as FA, FMS and CIM, all the maintenance problems should be considered seriously in not only in production and maintenance but also in related industrial productivity. This paper presents the study of equipment reliability improvement for rotary-machine vibration analysis. Based on these analyses, the maintenance management information system, and the machinery condition diagnosis technique are studied by using of the real-time diagnostic. Therefore, it is expected to improve the efficiency of business processes in the production and safety when we use this system.

• 한국조명전기설비학회:학술대회논문집
• /
• 한국조명전기설비학회 2004년도 춘계학술대회 논문집
• /
• pp.370-373
• /
• 2004

The inside and outside of the country utilities considered that they focused energy and economic aspect for short-term in new environment change of restructure. but it need service reliability preservation and improvement countermeasure, that is no to use existent estimation method for reliability preservation. therefore, analyze the equipment failure rate for suitable reliability preservation through equipment failure rate analysis of power distribution r system and evaluated equipment that is composing power distribution system by the failure rate. This paper estimated failure causes and the TVFR(Time Varying Failure Rate) for main equipment that is composing power distribution system using Weibull distribution.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2005년도 제36회 하계학술대회 논문집 A
• /
• pp.48-50
• /
• 2005

New environment change of electric power system focused in consumer's energy supply and demand. But electric power reliability preservation and reliability improvement countermeasure also need for long-term. It is need that change equipments that is composing electric power system in well-timed time and by maintaining, prevent breakdown beforehand and prevent consumer's power interruption by equipment fail. However, as only quantitative estimation is available by reliability estimation method that is presented in existing, it is no to use in dictionary fault prevention. Therefore, applied optimum reliability preservation through existent equipment fault data analysis of electric power system in equipment replace side, and this when maintain equipment replace of electric power system for reliability preservation using responsiveness analysis to base ordering evaluate. In existing about main equipment plain that this paper is power system the valued failure rate use this by score and precedence of electric power system equipment for replace of system considered expense.

• 산업경영시스템학회지
• /
• 제22권52호
• /
• pp.171-180
• /
• 1999

Industrial equipment reliability improvement and maintenance is gaining attention as the next great opportunity for manufacturing productivity improvement. Reactive maintenance is expensive because of extensive unplanned downtime and damage to machinery. To avoid such an unplanned machine downtime, it is needed to use proactive maintenance approach by either using historical maintenance data or by sensing machine conditions. This paper discusses failure diagonosis and prediction based on the condition-based maintenance and reliability technique. Thus, by enabling such a framework, it can bring us more efficient planning and execution of maintenance to reduce costs and/or increase profits.

• 산업경영시스템학회지
• /
• 제15권26호
• /
• pp.95-98
• /
• 1992

In a recent years, there has been little change in basic mechanical and electrical design of material handling equipment. Reliability, safety. strength and controls have been improved. The most important change is sophisticated control and operation brough about by the tremendous improvement in computer capabilities. Even though the material handling equipment has been improved, material handling equipment must be selected properly. In this paper, the paper selection of material handling equipment using expert system will be presented.

• 한국데이터정보과학회:학술대회논문집
• /
• 한국데이터정보과학회 2006년도 추계 학술발표회 논문집
• /
• pp.97-112
• /
• 2006

FRACAS(Failure Reporting, Analysis and Corrective Action System) is intended to provide management visibility and control for reliability and maintainability improvement of hardware and associated software by timely and disciplined utilization of failure and maintenance data to generate and implement effective corrective actions to prevent failure recurrence and to simplify or reduce the maintenance tasks. This process applies to acquisition for the design, development, fabrication, test, and operation or military systems, equipment, and associated computer programs. This paper shows the FRACAS development process and developed FRACAS system for a defense equipment.