• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.49 no.6
• /
• pp.481-488
• /
• 2021

The satellite telecommand processing system is the only way to provide telecommands for status monitoring, control, and mission execution. Domestic satellites can be divided into science, technology, and multi-purpose satellites, and geostationary satellites. These Satellites uses CCSDS standard protocol to communicate with ground stations. However, existing domestic satellites use only software to decode telecommands which increases cost of software development and verification of the developed software. Performance of software only approach is relatively low compared to hardware. In this paper, we present ASIC processing system specifically designed to decode telecommands. The system consists of a telecommand RAM, a protocol RAM/ROM, an ASIC, an interface unit of FPGA, and a relay block. The system handles general commands and pulse commands that are used in satellites. We established a ground station equipment and test environment to verify the system functionality, The result shows that our system reduces the development cost by 1/5 and improves the performance by 10⁵ times compared to the previous systems that decode telecommands only by software.

• Journal of Drive and Control
• /
• v.16 no.3
• /
• pp.51-58
• /
• 2019

The objective of this study was to investigate a simulation technology for the AM field based on ANSYS Inc.. The introduction of metal 3D printing AM process, and the examining of the present status of AM process simulation software, and the AM process simulation processor were done in the previous study (part 1). This present study (part 2) examined the use of the AM process simulation processor, presented in Part 1, through direct execution of Topology Optimization, Ansys Workbench, Additive Print and Additive Science. Topology Optimization can optimize additive geometry to reduce mass while maintaining strength for AM products. This can reduce the amount of material required for additive and significantly reduce additive build time. Ansys Workbench and Additive Print simulate the build process in the AM process and optimize various process variables (printing parameters and supporter composition), which will enable the AM to predict the problems that may occur during the build process, and can also be used to predict and correct deformations in geometry. Additive Science can simulate the material to find the material characteristic before the AM process simulation or build-up. This can be done by combining specimen preparation, measurement, and simulation for material measurements to find the exact material characteristics. This study will enable the understanding of the general process of AM simulation more easily. Furthermore, it will be of great help to a reader who wants to experience and appreciate AM simulation for the first time.

• Journal of Korean Neurosurgical Society
• /
• v.62 no.5
• /
• pp.526-535
• /
• 2019

Objective : While the risk of aneurysmal rebleeding induced by catheter cerebral angiography is a serious concern and can delay angiography for a few hours after a subarachnoid hemorrhage (SAH), current angiographic technology and techniques have been much improved. Therefore, this study investigated the risk of aneurysmal rebleeding when using a recent angiographic technique immediately after SAH. Methods : Patients with acute SAH underwent immediate catheter angiography on admission. A four-vessel examination was conducted using a biplane digital subtraction angiography (DSA) system that applied a low injection rate and small volume of a diluted contrast, along with appropriate control of hypertension. Intra-angiographic aneurysmal rebleeding was diagnosed in cases of extravasation of the contrast medium during angiography or increased intracranial bleeding evident in flat-panel detector computed tomography scans. Results : In-hospital recurrent hemorrhages before definitive treatment to obliterate the ruptured aneurysm occurred in 11 of 266 patients (4.1%). Following a univariate analysis, a multivariate analysis using a logistic regression analysis revealed that modified Fisher grade 4 was a statistically significant risk factor for an in-hospital recurrent hemorrhage (p=0.032). Cerebral angiography after SAH was performed on 88 patients ${\leq}3$ hours, 74 patients between 3-6 hours, and 104 patients >6 hours. None of the time intervals showed any cases of intra-angiographic rebleeding. Moreover, even though the DSA ${\leq}3$ hours group included more patients with a poor clinical grade and modified Fisher grade 4, no case of aneurysmal rebleeding occurred during erebral angiography. Conclusion : Despite the high risk of aneurysmal rebleeding within a few hours after SAH, emergency cerebral angiography after SAH can be acceptable without increasing the risk of intra-angiographic rebleeding when using current angiographic techniques and equipment.

• Journal of the Korea Institute of Information Security & Cryptology
• /
• v.29 no.4
• /
• pp.885-895
• /
• 2019

As seen in recent cases of hacking in financial services, attackers are attempting to hacking trustee with poor security management, rather than directly hacking a financial company. As a result, the consignor is strengthening the security check and control of the trustee, but small trustee has difficulties to invest in information security with the lack of computer facilities and the excessive cost of security equipment. In this paper I investigate the vulnerability of personal information processing life cycle standards in order to enhance the security of small consignee that receive personal information form the credit card company. To solve the vulnerability the company should use litigation management system constructed on cloud computing service and install VPN to secure confidentiality and intergrity in data transfer section. Also, to enhance the security of users, it is suggested to protect personal credit information by installing PC firewall and output security on user PC.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.20 no.8
• /
• pp.1-7
• /
• 2019

When using conventional 3D image scanning methods, it is common for image scanning to be done manually, which is labor-intensive. Scanning a space made up of complicated equipment or scanning a narrow space that is difficult for the user to enter, is problematic, resulting in quality degradation due to the presence of shadow areas. This paper proposes a method to scan an image using a rover equipped with a scanner in areas where it is difficult for a person to enter. To control the scan path precisely, the 3D image remote scan automation method based on the rover move rule definition is described. Through the study, the user can automate the 3D scan plan in a desired manner by defining the rover scan path as the rule base.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.23 no.7
• /
• pp.861-868
• /
• 2019

Various server-based services such as big data, IoT and artificial intelligence have been made online. As a result, the demand for IDC to support stable server operation is increasing. IDC is a server-based facility with a stable line and power supply facility that manages 20 to 30 servers in an efficiently separated rack-level subnetwork. Here, we need a way to efficiently manage servers security, firewall, and traffic on a rack-by-rack basis. Including traffic shaping capabilities that control routers, firewalls, IPS, and line speeds, as well as VPN technology, a recent interest. If three or five kinds of commercial equipment are adopted to support this, it may be a great burden to the management cost as well as the introduction cost. Therefore, in this paper, we propose a method to implement the five functions in one rack-unit small integrated security router. In particular, IDC intends to integrate traffic shaping and IPS, which are essential technologies, and to propose the utility accordingly.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.30 no.2
• /
• pp.152-159
• /
• 2019

In general, a Doppler radar can measure only the velocity of a moving target. To measure the distance of a moving target, it is necessary to use a frequency-modulated continuous wave or pulse radar. However, the latter are very complex in terms of both hardware as well as signal processing. Moreover, the requirement of wide bandwidth necessitates the use of millimeter-wave frequency bands of 24 GHz and 77 GHz. Recently, a new kind of Doppler radar using multitone frequency has been studied to sense the distance of moving targets in addition to their speed. In this study, we show that distance sensing of moving targets is possible by adjusting only the frequency of a 2.4 GHz Doppler radar with low cost phase lock loop. In particular, we show that distance can be sensed using only alternating current information without direct current offset information. The proposed technology satisfies the Korean local standard for low power radio equipment for moving target identification in the 2.4 GHz frequency band, and enables multiple long-range sensing and radio-frequency identification applications.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.13 no.6
• /
• pp.1145-1154
• /
• 2018

In order to prevent interference and interference of the frequency, it is required to convert the regulatory standard into the center of the radiation power radiated to the actual public. Since the radiation power regulation is related to general radio management such as technical standards, permits, and inspections, it is gradually introduced in consideration of applicability and urgency, and the radiation power related laws of major countries And a method of controlling the output of the radio equipment such as measurement, inspection, and authentication. In Korea, the proportion of antenna power supply is high, and in Europe, radiation power is high. Since the number of radio stations will increase and diversify in the future, institutional improvement should be made so that it can be measured in parallel with the radiocommunication infrastructure of the space manager. In order to convert to the radiative power management system, the system for the related radio system needs(Technical standards, certification, inspection of radio stations, post-management, etc.) to be improved.

• Tunnel and Underground Space
• /
• v.29 no.2
• /
• pp.108-123
• /
• 2019

In recent years, as safety management in underground mines has become more important in the worldwide, mine safety management technologies combining information communication technology such as real-time worker position tracking, monitoring system and equipment remote control have been developed. Wireless communication system is mainly applied to these technologies for the flexibility of network configuration. There are some cases the monitoring system was installed in domestic underground mines, but, it is necessary to develop the technology more suitable for domestic mining standard. In this study, we developed the real-time environmental monitoring system using ZigBee technology and examined the result of application to domestic limestone mine. Furthermore, applicability of the developed environment monitoring system to $VentSim^{TM}$ LiveView was checked. This study is expected to contribute to the related studies like the optimization of the ventilation system in underground mines.

• Journal of Sensor Science and Technology
• /
• v.28 no.5
• /
• pp.299-304
• /
• 2019

Recently, the development of rehabilitation medical technology has resulted in an increased interest in speech therapy equipment. In particular, research on articulation therapy for communication disorders is being actively conducted. Existing methods for the diagnosis and treatment of speech disorders have many limitations, such as traditional tactile perception tests and methods based on empirical judgment of speech therapists. Moreover, the position and tension of the tongue are key factors of speech disorders with regards to articulation. This is a very important factor in the distinction of Korean characters such as lax, fortis, and aspirated consonants. In this study, we proposed a Korean electropalatography (EPG) system to easily measure and monitor the position and tension of the tongue in articulation treatment and diagnosis. In the proposed EPG system, a sensor was fabricated using an AgCl electrode and biocompatible silicon. Furthermore, the measured signal was analyzed by implementing the bio-signal processing module and monitoring program. In particular, the bio-signal was measured by inserting it into the palatal from an experimental control group. As a result, it was confirmed that it could be applied to clinical treatment in speech therapy.