• Journal of Digital Convergence
• /
• v.16 no.1
• /
• pp.453-461
• /
• 2018

As modern people's needs to be healthy and beautiful are increasing, medical skin care industry is growing both in quantity and quality. Therefore, this study investigated job demand and the moderating effect of job resource in employees who provided medical skin care services and the effects of job demand and job specialty on job satisfaction. The subjects of the study were medical estheticians in Gwangju City and Jeonnam Province and were interviewed with the use of a questionnaire. The data was analysed using SPSS 21.0 and a frequency analysis, a factor analysis, a reliability analysis, a correlation analysis were conducted and the results are presented as follows: The results are presented as follows: First, as for job demand, only cooperation had the moderating effect of job resource. Second, when the effect of job resources on medical skin care specialty was inspected, it was discovered that cooperation and equipment application had a positive effect on the specialty. Third, when the effect of job demand and specialty on job satisfaction was inspected, it was discovered that job tension had a negative effect on satisfaction and workload and specialty had a positive effect on satisfaction.

• Journal of Digital Convergence
• /
• v.12 no.5
• /
• pp.139-148
• /
• 2014

In recent years, computational models using parametric estimation method have been developed and used widely for efficient cost analysis. In this research, by applying experienced data from Guidance and Control Systems in Missile System field, the cost analysis for engineering model and commercial computational model(Price H, HL, M, S) are conducted and its result is analysed, so that the difference between two models and its grounds are apprehended. Comparing the calibrated value of computational model based on the data base of similar equipment and the cost from the engineering estimation, the two results are very close. It means that the credibility of data is enhanced through calibration. Also, for cost analysis of similar components in the future, the method for calibration of the computational models is also examined. When estimating development cost in this research, although many parts have been estimated through uncertain elements, the reliability could have been enhanced by applying computational model which secures objectivity. It is a very reasonable estimation method by utilizing calibration of the computational models based on existing accumulated development data.

• Journal of Radiation Protection and Research
• /
• v.40 no.4
• /
• pp.202-210
• /
• 2015

The low dose radiation is done for a long period, thus researchers have to know the exact dose distribution for the irradiated mouse. This research has been conducted in order to find out methods in transmitting an exact dose to mouse in a mouse irradiation experiment carried out using $^{137}Cs$ irradiation equipment installed in the DIRAMS (Dongnam Institution of Radiological & Medical Sciences) research center. We developed a single mouse housing cage and shelf with adjustable geometric factors such as distance and angle from collimator. The measurement of irradiated dose showed a maximal 42% difference of absorbed dose from the desired dose in the conventional irradiation system, whereas only 6% difference of the absorbed dose was measured in the self-developed mouse apartment system. In addition, multi mice housing showed much difference of the absorbed dose in between head and body, compared to single mouse housing in the conventional irradiation system. This research may allow further research about biological effect assessment for the low dose irradiation using the self-developed mouse apartment to provide more exact doses which it tries to transmit, and to have more reliability for the biological analysis results.

• The KIPS Transactions:PartD
• /
• v.15D no.6
• /
• pp.861-872
• /
• 2008

As rapid development of computing environment, field of automatic identification research which interoperates with various physical objects and digital information is making active progress. Although the automatic identification system is widely used in various industries, application of automatic identification system in the field of medical health doesn't reach other industry. Therefore research in medical health supplies such as medical equipment, blood, human tissues and etc is on progress. This paper suggests the application of automatic identification technology for biological resources which is core research material in human genome research. First of all, user environment requirements for the introduction of automatic identification technology are defined and through the experiments and research, barcode is selected as a suitable tag interface. Data Matrix which is 2D barcode symbology is chosen and data schema is designed based on UCC/EAN-128 for international defecto standard. To showapplicability of proposed method when applied to actual environment, we developed, tested and evaluated application as following methods. Experiments of barcode read time at 196 and 75 below zero which is actual temperature where biological resources are preserved resulted read speed of average of 1.6 second and the data schema satisfies requirements for the biological resources application. Therefore suggested method can provide data reliability as well as rapid input of data in biological resources information processing.

• Journal of Korean Academy of Nursing
• /
• v.4 no.2
• /
• pp.67-77
• /
• 1974

Introduction This study is concerned with improving the nursing education curriculum. The purpose of the study was to 1. Review the basic principles of curriculum development. 2. Determine opinion about current nursing curriculums from recent nursing school graduates. Methods of the study A questionnaire was distributed to 250 nurses, in f general hospitals in Seoul. The nurses were graduated from nursing schools in 1973, but represented all types of nursing programs. The Questionnaire was designed to illicit responses about nursing school curriculums in 5 areas: 1. Establishment of objectives 2. Selection of learning experience 3. Organization of learning experience 4. Instruction 5. Evaluation Summary of the major findings 1. Establishment of objectives Thirty nine point three percent of the nurses said that the first objective of the general nursing education was stated "to educate a nurse as a human being with humanity:" Ninety point eight percent of the total respondents said that thor knew the objectives of the curriculum of their nursing schools, but more half of them (58.3%) understood the objectives vaguely at the time they attended nursing school. 2. Selection of learning experience Thirty nine point eight percent of the respondents said their curriculum contained "only a few" liberal arts courses. 3. Organization of learning experience forty seven point six percent. of the respondents were reported that the number of course hours was "insufficient" in liberal arts courses. Fifty seven point three percent of the nurses felt there was an overemphasis on any special topic in liberal arts courses. 4. Instruction Methods of instruction were as follows: Liberal arts courses-a. lecture which centered on explanation (61.1%), b. lecture which centered on writing (43.7%) Supporting nursing courses-a. lecture which centered on explanation (34.0%). b. laboratory Practice (37.8%) Clinical nursing courses-a. lecture which centered on writing (33.0%), b. clinical practice (38.4%) The percentage of respondents replying that various equipment for the learning activities were "insufficient"were as follows: Liberal arts courses-51.0% Supporting nursing courses-28.6% Clinical nursing courses-37.9% 5. Evaluation In the liberal arts courses, 30.6% o( the respondents answered that the evaluation of records was in their opinion "poor, " and 28.2% of the respondents reported that the method of evaluation was "unfair and discouraging. " "Development of a systematic theory of nursing" was thought to be essential for curriculum improvement. The respondents felt that the junior year was the hardest because 1. Number of subjects was too great (28.1%) 2. Lack of a systematic theory of nursing (14.5%) 3. Conflict due to the difference between nursing theory and nursing practice (21.4%) Recommendations 1. Since this study was limited to nurses who had graduated in 1973, a larger study involving professors, graduate students, and nurses from a wider area is suggested in order to establish the reliability and validity of the present findings. 2. Nursing research should be carried out more actively in order to develope nursing science. 3. A permanent organization for research into ways to improve the curriculum should be established in each nursing school.

• Journal of the Microelectronics and Packaging Society
• /
• v.26 no.4
• /
• pp.163-169
• /
• 2019

Sn-Pb solder alloys in electronics rapidly has been replaced to Pb free solder alloys because of various environmental regulations such as restriction of hazardous substances directive (RoHS), European Union waste electrical, waste electrical and electronic equipment (WEEE), registration evaluation authorization and of chemicals (REACH) etc. Because Sn58%Bi (in wt.%) solder alloy has low melting point and higher mechanical properties than that of Sn-Pb solder, it has been studied to manufacture electronic components. However, the reliability of Sn58%Bi solder could be lowered because of the brittleness of Bi element included in the solder alloy. Therefore, we observed the microstructures of Sn58%Bi composite solders with various contents of Sn-decorated multiwalled carbon nanotube (Sn-MWCNT) particles and evaluated bonding strength of the FR-4 components assembled with Sn58%Bi composite solder. Also, microstructures and bonding strengths of the Sn58%Bi composite solder joints were evaluated with the number of reflows from 1 to 7 times, respectively. Bonding strengths and fracture energies of the Sn58%Bi composite solder joints were measured by die shear test. Microstructures and fracture modes were observed with scanning electron microscope (SEM). Microstructures in the Sn58%Bi composite solder joints were finer than that of only Sn58%Bi solder joint. Bonding strength and fracture energy of Sn58%Bi composite solder including 0.1 wt.% of Sn-decorated MWCNT particles increased up to 20.4% and 15.4% at 5 times in reflow, respectively.

• Resources Recycling
• /
• v.26 no.1
• /
• pp.69-77
• /
• 2017

Used small household appliances(small e-waste) consists of a variety of complex materials and components. The small e-waste is mainly composed of plastics and an important potential source of waste plastic. The black plastics, particularly are very difficult to separate by resin type and therefore these are mainly recycled in the form of a mixtures. In the present study, the sorting technologies such as gravity and electro static separation, near-infrared ray(NIR) and IR/Raman optical sorting separation on mixture of black plastics were analyzed and their limitations on sorting process were also investigated. The Laser Induced Breakdown Spectroscopy(LIBS) spectrum of each black plastics was used for identification of black plastics by resin type, and after analyzing the normalization operation, Principal Component Analysis(PCA) was carried out. The spectrum data was optimized through PCA process. In order to improve the identification accuracy and sorting efficiency of black plastics, it is necessary to design a classifier with high efficiency and to improve the performance and reliability of the classifier by applying the field of intelligent algorithms.

• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.10 no.6
• /
• pp.545-551
• /
• 2017

It is very important to effectively obtain the information related to the human body shape for user-centered design. The human body shape is a huge combination of various irregular curves and is typically obtained by a 3-D Scanner. 3-D scanners show high reliability; however, they are expnsive equipment with limited mobility. 3-D models of irregular-shaped curves were created by a photogrammetric approach and the errors between the original curve and the models were evaluated. 3-D models were created based on 160, 80, 40, 20, 10, and 5 marking points evenly located on the original curve. In the case of convex curve, low levels of residuals were observed in the models from 160, 80, 40, and 20 marking points (0.13% max). In the combination of convex and concave curves, relatively low levels of residuals were observed in the models from 160, 80, and 40 marking points (0.29%). It is possible to conclude that marking points should be placed at every 5% of overall length of a convex curve and at every 2.5% of overall length of a curve with convex and concave curve in order to maintain low levels of errors. A photogrammetric approach can be used as an alternative for the 3-D scanners with advantages of low cost and mobility.

• Journal of the Korean Institute of Gas
• /
• v.24 no.4
• /
• pp.84-92
• /
• 2020

Most facilities in chemical plants operate in environments that are outside the range of temperature and pressure that can be encountered on a daily basis, and are vulnerable to aging due to these stresses and environmental conditions. The facilities exposed to these conditions are not only likely to fail due to cumulative damage, but also lead to accidents if maintenance and replacement are not performed.Recommendation guidelines called risk-based inspection are widely used around the world-wide. However, limits exist for facilities that have already elapsed for a certain. As a result of the survey on the aging of Ulsan industrial complex in Korea, which carries out proper inspection, many of the facilities have been used for 20 years. Also, most of the facilities where the accident occurred have been in operation for more than 20 years. Therefore, this study suggested criteria for classifying devices that have exceeded a certain period of use as obsolete facilities. In addition, quantitative risk assessment was conducted. The safety investment method using the cost-benefit analysis method was proposed in order to calculate the loss cost and reduce the risk by expressing the risks of the corresponding aged facility as an Economic index. By utilizing the method of cost-benefit analysis of old facilities using the quantitative risk assessment presented in this study, it can be expected to improve the performance and life of old facilities, improve production efficiency and reliability of the system of facilities, change the recognition of safety management costs, increase employee stability, and reduce loss costs.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.8 no.1
• /
• pp.183-194
• /
• 2004

It's essential process to study non-linear material function related to characteristics of compressibility and permeability when we predict the consolidation behavior of soft clay ground. In this study, laboratory tests were conducted to find out the material function using marine clay. Standard oedometer test and Rowe cell test were performed with conditions, which were classified into vertical drainage only, radial drainage only and vertical-radial drainage case. Modified oedometer test equipment was developed to find out the material function and special extrusion device was originated to minimize the sample disturbance effect. Reliability of the results in modified oedometer test could be confirmed by comparing with the Rowe cell's one. Effective stress - void ratio - permeability relations were analyzed using all testing results. As a result, void ratio with effective stress level could be expressed by the power function and permeability with void ratio could be expressed by exponential function. In soft clay with high initial water content and low shear strength, non-linear characteristics related to compressibility and permeability varied with wide range by the effective stress levels. It's important to note that non-linearity of the material function should be considered at prediction of the consolidation behavior.