• The Journal of the Korea Contents Association
• /
• v.16 no.3
• /
• pp.257-268
• /
• 2016

The purpose of this research is to find the cause of low degree of utilization of medical equipment that are provided as Official Development Assistance(ODA) and to suggest an effective medical equipment support system for ODA. This research analyzes the supporting process of the medical equipment as ODA in Kitengela Health Center in Kenya. As the result of analysis, it has been found that the following problems. 1) It was found that users was attended insufficient to demand medical equipment. 2) The determination of medical equipment request was inadequate. 3) It was appeared to be organized the compilation of the budget for purchases and operation of medical equipment 4) The improvement of procurement system of medical equipment was appeared to need. 5) It was appeared to need to build conditions for installation of medical equipment. 6) It was necessary to secure finance, to conduct periodic management training, and to ensure available human resources in management and maintenance in order to sustain the medical equipment management ability and it is encouraged to promote leadership in healthcare facility management. Finally, the theoretical and practical implications of this research are discussed.

• Industrial Engineering and Management Systems
• /
• v.13 no.2
• /
• pp.231-249
• /
• 2014

This paper discusses a green supply chain with a manufacturer and a collection trader, and it proposes an optimal production planning for remanufacturing of parts in used products with quality classification errors made by the collection trader. When a manufacturer accepts an order for parts from a retailer and procures used products from a collection trader, the collection trader might have some quality classification errors due to the lack of equipment or expert knowledge regarding quality classification. After procurement of used products, the manufacturer inspects if there are any classification errors. If errors are detected, the manufacturer reclassifies the misclassified (overestimated) used products at a cost. Accordingly, the manufacturer decides to remanufacture from the higher-quality used products based on a remanufacturing ratio or produce parts from new materials. This paper develops a mathematical model to find how quality classification errors affect the optimal decisions for a lower limit of procurement quality of used products and a remanufacturing ratio under the lower limit and the expected profit of the manufacturer. Numerical analysis investigates how quality of used products, the reclassification cost and the remanufacturing cost of used products affect the optimal production planning and the expected profit of a manufacturer.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.19 no.2
• /
• pp.193-201
• /
• 2019

The purpose of this study is to investigate the internal and extrnal factors of procurement of non-bid parts in the overseas militaries products for commercial purchase after deploy at Militaries. How we will continures to support of Primary of delivery to end users for all systems for maintenance support equipment products of Korean militaries. the purpose of this study is to propose a development direction for solving hard to find parts and non-bid products problem due to non-response of overseas repair parts suppliers.

• International conference on construction engineering and project management
• /
• 2022.06a
• /
• pp.1254-1254
• /
• 2022

The Multi-family Residential is one of the most famous building types for a rental property in the US. Often times it includes multiple residential buildings and some amenity facilities, including a clubhouse or leasing office, swimming pool, dog park, and garages. Since the building type is built for rental purposes, the construction planning is phased and it makes the project complicated. Detailed planning and execution are important for successful construction management. This paper provides some management practices that are applied to one of the multi-family residential construction projects in Phoenix, AZ. The Front End Planning (FEP) process performed by both owner and contractor is the first key to a successful construction project. Specifically, the early review of phased turnover strategy, grading, fire/Americans with Disabilities Act (ADA) compliance, and Mechanical/ Electricity/Plumbing/Technology (MEPT) will provide absolute benefit to the project. Second, using a scheduling method to control short-term schedules and long-term can provide the ability to manage the issues with agility. Third, material delivery and procurement dominate the both project schedule and cost. With this COVID-19 circumstance, it is hard to expect the material, equipment, and labor forces to be delivered on time with the contracted price. Managing floats are more than important to managing construction productivity. Risk management should work to share the risks fairly. Lastly, turnover is directly linked with the profit of the project for both owner and contractor. The communication between the owner and contractor to re-schedule the proper turnover schedule is important for the phased construction project.

• Journal of the Korea Safety Management & Science
• /
• v.25 no.2
• /
• pp.113-120
• /
• 2023

Occupational safety and health management expenses in the construction industry are statutory and separately included in the cost statement to prevent occupational accidents and health problems. The expenses are determined by multiplying the standard amount by the rate decided according to construction types and scales. However, the current expense appropriation method does not properly reflect the recent changes in the construction industry such as industry size, industry diversification, and social atmosphere about safety reinforcement. This study surveyed 1579 questionnaires in total and analyzed expense execution rate and proportion of each expense category. The expense execution rate was relative higher in complex construction (e.g., heavy construction = 126%, civil engineering = 125%) and long-period project (equal to or over 48 months construction = 133%) compared to general construction (98~116%) and short-period project (less than 48 months construction = 115%). The proportion of spending expenses was higher in the category of safety manager labor costs (25~52%), safety facility costs (22~40%), and personal protective equipment costs (10~25%). The analysis results of the study can be utilized in revising the standard expense appropriation method by reflecting the current usages of the occupational safety and health management expenses in the construction industry.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.19 no.9
• /
• pp.59-70
• /
• 2020

Three-dimensional (3D) design data is used for various purposes throughout the life cycle of a plant construction project. Plant 3D CAD systems support 3D modeling based on specs-catalogs, which contain data that are used for different purposes such as design, procurement, production, and handover. Therefore, it is important to share the spec-catalog data in the 3D design model with other application systems. Sharing this data thus requires a system that extracts spec-catalog data from plant 3D CAD systems and converts them into neutral model data. In this paper, we analyze equipment spec-catalog data of plant 3D CAD systems and, based on these analyses, define the data structure for neutral spec-catalog data. We subsequently propose a procedure that translates native spec-catalog data to neutral model data and develop a prototype system that performs this operation. The proposed method is then experimentally validated for the test spec-catalog data.

• Journal of the Korean Society of Industry Convergence
• /
• v.27 no.1
• /
• pp.143-149
• /
• 2024

The production and procurement of shipbuilding and offshore equipment is an important competitive factor in the shipbuilding and offshore industry. Recently, ICT-based digital technology has been rapidly applied to the manufacturing industry following the Fourth Industrial Revolution. Under the digital transformation, real-time data interface technology based on SCM (Supply Chain Management) is emerging as an important tool to improve the efficiency of the equipment manufacturing process. In this study, the characteristics and advantages and disadvantages of interface technologies of web-based data interface technologies were compared and analyzed. The performance was compared between theoretical evaluation based on technical features and practical application cases. As a result, it was confirmed that GraphQL is useful for selective data processing, but there is a problem with optimization, and REST API has a problem with receiving data due to a fixed data structure. Therefore, this study aims to suggest ways to utilize and optimize these data interface technologies.

• Journal of Digital Convergence
• /
• v.16 no.5
• /
• pp.33-42
• /
• 2018

This paper is based on the suggestions of the prior research on the buyer feedback, the selection of various product options, and the payment procedure improvements for Korea ON-line E-Procurement System(KONEPS), and this is to confirm the necessity of improvement and satisfaction from the viewpoint of the workers of the public and subordinate organizations the purchasing and using of the computer equipment in the actual KONEPS(Korea ON-line E-Procurement System). Based on the basic questionnaires and in-depth interviews, this paper conducts the qualitative case studies on IT and non - IT workers who had purchasing experiences for equipment at public institutions and government agencies in Gyeongbuk province. As results of the study, it was confirmed that the improvement is necessary for the buyer feedback and option selection part, and that there is a difference among the work experience for the simplification of the payment procedure and the satisfaction. In addition, the biggest contribution in the provided research is to categorize and to analyze the opinions on the use of public and relevant subordinate research participants. Additional work will be needed for a large number of workers in public and subordinate organizations who have purchasing experiences for handling various procurement products and those working in the metropolitan area and other public and subordinate agencies.

• Korean Journal of Community Nutrition
• /
• v.13 no.4
• /
• pp.520-530
• /
• 2008

The purpose of this study was to investigate the characteristics of the foodservice management practices, the equipment ratio of sanitary facility/equipment, and dietitians' perceptions of (i) the barriers to sanitary management and (ii) the sanitary management performance level in the welfare institutions for the disabled in Korea. The survey was conducted during the period from September 7 to October 15, 2006. A total of 91 institutions(response rate 74.6%) were analyzed by using SPSS(windows ver. 14.0). The average number of meals served per day per an institution was 379. The majority(93.4%) of dietitians made decisions in procurement. The major part of the purchase was made through private contract. The factors affecting menu planning were nutrition, food preference, and cost, in the order of importance. Among the food items, fruits were infrequently served, while protein source foods and green leaf vegetables were almost daily served. The equipment ratio of sanitary facilities/equipment was 45%, which was relatively low. Most dietitians perceived 'limited availability of facilities and equipment' and 'the lack of support from financing department' as the major barriers in implementing a desirable sanitary system. Sanitary management performance in 'the food ingredient' was perceived as the lowest, while that in 'the uniform' showed the highest. The results of this study suggest that a proper supporting program on securing the facility/equipment and adequately trained employees are needed for successful sanitary management. Also, a more frequent supply of fruits for the disabled is recommended.

• Journal of Fisheries and Marine Sciences Education
• /
• v.26 no.3
• /
• pp.498-509
• /
• 2014

Offshore plants is an intensive industry where real value is able to be created when EPCIC(Engineering, Procurement, Construction, Installation, Commissioning) is combined. Many universities and educational institutions have established major fields and graduate schools related in offshore construction and engineering as well as safety training and occupational courses. Most of the personnel who have graduated and passed those educational institutions have been working in domestic shipbuilding companies and marine equipment manufacturers. Therefore, customized education and training should be developed according to the educational demands required and then skilled personnel are needed to be supplied at proper times. This study, therefore, has found personnel demands inside and outside the country and occupational sections of offshore plants. Consequently, this study suggests making up a council comprised of shipbuilding companies, marine equipment manufacturers and educational institutions with government organization, and also researches the necessity of getting a job of personnel trained by the customized education. These results are expected to contribute to the development of education curriculum of domestic offshore plant as well as ODC(Offshore Development Center).