• 제목/요약/키워드: Equations of state

검색결과 1,474건 처리시간 0.027초

Ti-6Al-2Sn-4Zr-6Mo 합금의 고온압축 변형거동 (High Temperature Compressive Deformation Behavior of Ti-6Al-2Sn-4Zr-6Mo Alloy)

  • 현용택;이용태;이찬규
    • 한국재료학회지
    • /
    • 제11권2호
    • /
    • pp.82-87
    • /
    • 2001
  • Ti-6Al-2Sn-4Zr-6Mo(Ti6246) 합금의 고온 변형거동을 조사하기 위하여 $\alpha$+$\beta$ 영역 및 $\beta$영역의 온도에서 $10^0s^{-1}$에서 $10^{-3}s^{-1}$의 변형속도로 압축시험을 수행하였다. 유동응력은 변형속도가 증가하고 시험 온도가 감소함에 따라 증가하였다 90$0^{\circ}C$ 이하에서 시험한 결과로부터 얻어진 유동곡선은 가공연화 현상을 나타내었으나, 이 합금의$\beta$영역인 95$0^{\circ}C$ 이상에서는 유동응력이 지속적으로 증가하다가 정상 상태를 나타냈다. 압축시험 결과로부터 얻은 유동곡선 분석을 통하여 유동응력의 변형량, 변형속도 및 온도에 대한 관계로부터 이 합금에 대한 구성방정식을 구하였다.

  • PDF

매니폴드 크기에 따른 1 kWe급 내부 매니폴드형 고체산화물 연료전지 스택 유량 분배에 관한 수치 해석 (Numerical Analysis on the Flow Distribution in a 1 kWe SOFC Stack of Internal Manifolds According to the Variation of Manifold Sizes)

  • 김영진;윤호원;김현진;윤경식;유지행
    • 한국수소및신에너지학회논문집
    • /
    • 제33권1호
    • /
    • pp.47-54
    • /
    • 2022
  • In this study, we performed numerical analysis for 1 kWe SOFC stack of internal manifold types according to the different manifold sizes to verify the influence of the flow uniformity into each cell. To simulate the flow phenomena in the stack, the continuity and momentum conservation equations including the standard k-𝜺 turbulent model for the steady-state conditions were applied. From the calculation results, we verified that the pressure drop from inlet pipes to outlet pipes decreased to a log scale as the manifold size increased in the internal manifold types. Also, we found that the flow uniformity increased on an exponential scale as the manifold size increased. In addition, the calculation results showed that the flow uniformity gradually improved as the fuel and oxygen utilization increased.

수동급기 직접 메탄올 연료전지의 동적 모델 (Dynamic Model of a Passive Air-Breathing Direct Methanol Fuel Cell)

  • 하승범;장익황;차석원
    • 한국신재생에너지학회:학술대회논문집
    • /
    • 한국신재생에너지학회 2008년도 춘계학술대회 논문집
    • /
    • pp.33-36
    • /
    • 2008
  • The transient behavior of a passive air breathing direct methanol fuel cell (DMFC) operated on vapor-feeding mode is studied in this paper. It generally takes 30 minutes after starting for the cell response to come to its steady-state and the response is sometimes unstable. A mathematical dynamic one-dimensional model for simulating transient response of the DMFC is presented. In this model a DMFC is decomposed into its subsystems using lumped model and divided into five layers, namely the anodic diffusion layer, the anodic catalyst layer, the proton exchange membrane (PEM), the cathodic catalyst layer and the cathodic diffusion layer. All layers are considered to have finite thickness, and within every one of them a set of differential-algebraic governing equations are given to represent multi-components mass balance, such as methanol, water, oxygen and carbon dioxide, charge balance, the electrochemical reaction and mass transport phenomena. A one-dimensional, isothermal and mass transport model is developed that captures the coupling between water generation and transport, oxygen consumption and natural convection. The single cell is supplied by pure methanol vapor from a methanol reservoir at the anode, and the oxygen is supplied via natural air-breathing at the cathode. The water is not supplied from external source because the cell uses the water created at the cathode using water back diffusion through nafion membrane. As a result of simulation strong effects of water transport were found out. The model analysis provides several conclusions. The performance drop after peak point is caused by insufficiency of water at the anode. The excess water at the cathode makes performance recovery impossible. The undesired crossover of the reactant methanol through the PEM causes overpotential at the cathode and limits the feeding methanol concentration.

  • PDF

신뢰성에 기초한 고속철도 교량의 안전도 및 내하력평가 (Reliability-Based Safety and Capacity Evaluation of High-Speed Railroad Bridges)

  • 조효남;곽계환
    • 전산구조공학
    • /
    • 제10권3호
    • /
    • pp.133-143
    • /
    • 1997
  • 한국에서는 서울-부산간 고속철도건설이 5년전 시험구간의 시공을 시작으로 본격적인 고속철도건설이 진행중에 있다. 본 연구에서는, 고속철도교량의 전산화 유지관리를 위한 신뢰성에 기초한 건전성 평가모델을 개발하는데 중점을 두고 있다. 신뢰성 해석을 위한 PC철도교의 강도한계상태모형은 휨 또는 전단강도와 같이 단일 파괴모드뿐만아니라 휨, 전단 및 비틀림을 동시에 고려하는 조합상관식도 고려되었다. 실제적인 내하력 평가를 위해 체계신뢰성에 기초한 등가내하력 평가방법을 사용하였으며 이로부터 얻은 결과를 요소신뢰성과 재래적인 방법에 의한 결과와 비교하였다. 본 논문에서 제안한 모델은 실재하는 고속철도교량의 신뢰성에 기초한 실제적인 안전도 및 내하력평가를 위한 적절한 모델임을 알 수 있었다.

  • PDF

천이크리프를 고려한 구형압입 크리프 물성평가법 (Spherical Indentation Techniques for Creep Property Evaluation Considering Transient Creep)

  • 임동규;이진행;김민수;이형일
    • 대한기계학회논문집A
    • /
    • 제37권11호
    • /
    • pp.1339-1347
    • /
    • 2013
  • 기존 단축 크리프시험에서는 천이 크리프의 영향을 무시하고 정상상태 크리프만을 고려하기 때문에 실제 크리프 특성을 나타내지 못한다. 이에 본 연구에서는 천이크리프를 고려한 압입 크리프 물성평가법을 제시한다. 다양한 재료에 대해 구형압입시험 전산모사를 이용해 크리프 물성변화에 따른 거동을 살펴보고, 크리프 특성을 무차원 변수들의 회귀식으로 표현한다. 이를 토대로 천이크리프를 고려한 압입 크리프 물성평가 프로그램을 생성했다. 제시한 물성평가 프로그램을 통해 압입 하중-변위 곡선으로부터 크리프지수, 계수값들을 각각 1.1%, 2.3% 오차범위에서 예측할 수 있다.

이방압밀이 반복하중을 받은 과압밀점토의 비배수전단강도에 미치는 영향 (Effects of Anisotropic Consolidation on the Postcyclic Undrained Shear Strength of an Overconsolidated Clay)

  • 강병희;윤형석;박동진
    • 한국지반공학회지:지반
    • /
    • 제14권1호
    • /
    • pp.37-48
    • /
    • 1998
  • 압밀응력비, 과압밀비 및 반복재하를 포함하는 압밀응력이력이 점성토의 비배수전단강도에 미치는 영향에 관해서 연구하였다. $(S_u/\sigma'_{vc})ckou/(S_U/\sigma_{vc})cuv$의 강도비는 과압밀비가 증가함에 따라 증가됨이 관찰되었다. Mayne(1980)이 과압밀점토의 비배수전단강도를 추정하기 위해 제안한 식(1)과 Yasuhara(1994)가 반복재하로 인해 발생된 간극수압이 소산된 후의 비 배수전단강도를 구하기 위해 제안한 식(4)는 Ko압밀상태에서도 비교적 잘 적용될 수 있음을 알 수 있었다. 또한 이들 두 식중의 원위치전단강도를 위한 한계상태간극수압정수 A.값은 조금 과압밀된 점토의 경우(OCR< 3) 표준압밀시험에 의해서 구할 것을 제안하였다.

  • PDF

부드러운 카메라 움직임을 위한 EM 알고리듬을 이용한 삼차원 보정 (Structure and Motion Estimation with Expectation Maximization and Extended Kalman Smoother for Continuous Image Sequences)

  • Seo, Yong-Duek;Hong, Ki-Sang
    • 한국정보과학회논문지:소프트웨어및응용
    • /
    • 제31권2호
    • /
    • pp.245-254
    • /
    • 2004
  • 이 논문은 카메라가 연속적으로 움직일 때 그 카메라로부터 얻은 동영상을 분석하여 카메라의 움직임에 대한 정보와 영상내의 구조물의 삼차원 정보를 계산하는 알고리듬에 대한 것이다. 일반적으로 불 연속한 위치에서 얻은 영상의 집합으로부터 삼차원정보 및 카메라 정보를 얻는 경우에는 카메라의 움직임에 대한 제약조건이 필요 없지만, 비디오 카메라를 이용하여 동영상을 취득하는 경우에는 항상 카메라의 움직임이 부드러워야 한다는 조건이 따라 붙는다. 따라서, 이 논문에서는 ‘부드러운 움직임을 가지는 카메라’라는 제약조건을 포함하는 카메라 및 삼차원정보의 최적화 과정에 대하여 연구하였다. 목적하는 바를 얻기 위하여 Expectation-Maximization 방법을 사용하여 카메라의 움직임에 대한 모델 파라메터를 동시에 추정하였는데, 이를 위하여 Extended Kalman Filter 와 Extended Kalman Smoother를 적용하였다. 이 연구는 길이가 긴 비디오 영상열의 비젼 해석에 기본이 된다. 실제 영상을 이용하여 실험한 결과를 보였다.

대칭 1차원 5-이웃 CA 기반의 키 수열 생성기 설계 (Design of Key Sequence Generators Based on Symmetric 1-D 5-Neighborhood CA)

  • 최언숙;김한두;강성원;조성진
    • 한국전자통신학회논문지
    • /
    • 제16권3호
    • /
    • pp.533-540
    • /
    • 2021
  • 시스템의 성능을 평가하기 위하여 1차원 3-이웃 셀룰라 오토마타(Cellular Automata, 이하 CA) 기반의 의사 난수 생성기가 여러 분야에서 많이 응용되고 있다. 보다 더 효과적인 키 수열 생성을 위해 2차원 CA와 1차원 5-이웃 CA가 응용되었으나, 주어진 특성 다항식에 대응하는 대칭 1차원 5-이웃 CA를 설계하는 것은 매우 어려운 문제이다. 이를 해결하기 위해 특성 다항식의 점화식을 이용한 합성 방법, Krylov 행렬을 이용한 합성 방법과 같이 1차원 5-이웃 CA 합성에 관한 연구들이 진행되었다. 그러나 여전히 비선형 방정식을 풀어야 하는 문제점이 있었다. 이러한 문제점을 해결하기 위해, 최근 90/150 CA의 전이 행렬과 블록행렬을 이용한 1차원 5-이웃 CA 합성 방법이 제안되었다. 본 논문에서는 제안된 알고리즘의 이론적인 과정을 상세히 기술하고 그 알고리즘을 이용하여 높은 차수의 원시 다항식에 대응하는 대칭 1차원 5-이웃 CA를 구한다.

Development of a predictive functional control approach for steel building structure under earthquake excitations

  • Mohsen Azizpour;Reza Raoufi;Ehsan Kazeminezhad
    • Earthquakes and Structures
    • /
    • 제25권3호
    • /
    • pp.187-198
    • /
    • 2023
  • Model Predictive Control (MPC) is an advanced control approach that uses the current states of the system model to predict its future behavior. In this article, according to the seismic dynamics of structural systems, the Predictive Functional Control (PFC) method is used to solve the control problem. Although conventional PFC is an efficient control method, its performance may be impaired due to problems such as uncertainty in the structure of state sensors and process equations, as well as actuator saturation. Therefore, it requires the utilization of appropriate estimation algorithms in order to accurately evaluate responses and implement actuator saturation. Accordingly, an extended PFC is presented based on the H-ifinity (H∞) filter (HPFC) while considering simultaneously the saturation actuator. Accordingly, an extended PFC is presented based on the H-ifinity (H∞) filter (HPFC) while considering the saturation actuator. Thus, the structural responses are formulated by two estimation models using the H∞ filter. First, the H∞ filter estimates responses using a performance bound (𝜃). Second, the H∞ filter is converted into a Kalman filter in a special case by considering the 𝜃 equal to zero. Therefore, the scheme based on the Kalman filter (KPFC) is considered a comparative model. The proposed method is evaluated through numerical studies on a building equipped with an Active Tuned Mass Damper (ATMD) under near and far-field earthquakes. Finally, HPFC is compared with classical (CPFC) and comparative (KPFC) schemes. The results show that HPFC has an acceptable efficiency in boosting the accuracy of CPFC and KPFC approaches under earthquakes, as well as maintaining a descending trend in structural responses.

농업생산시설의 환경조절용 시뮬레이터에 관한 연구 - 수치모델에 의한 기본시스템 구축 - (A Study on Simulator for Environment Control of Agricultural Production Facility - Construction of Basic System with Numerical Model -)

  • 손정익;최규홍
    • 생물환경조절학회지
    • /
    • 제5권2호
    • /
    • pp.111-119
    • /
    • 1996
  • 본 연구에서는, 농업생산시설내 환경조절을 위한 시뮬레이터의 기본 시스템을 구축하고, 실내환경을 조절하면서 실측치와 예측치를 비교함으로써 적용성을 검토하였다. 모델은 비정상상태의 에너지 및 물질수지에 근거하여 구축되었고, PCSMP를 사용하여 아날로그형 프로그램이 가능하였다. 본 연구의 결과를 요약하면 다음과 같다. 구축된 환경조절용 시뮬레이터의 기본시스템은 기본모델, 광환경모델, 환경제어모델로 구성되어서 상호 독립적인 개발이 가능하였다. 기본모델은 본 시스템의 주요 부분으로써 열환경모델, 재배모델, 환기모델, 토양모델, 탄산가스모델을 구성되었고, 환경제어모델은 보온커텐, 냉난방기 및 지중열 교환을 고려하였다. 실제로 환경조절이 실시되고 있는 온실의 주간 및 야간의 실내온도의 실측치와 모델에 의한 예측치를 비교한 결과, 비교적 잘 일치되어서 그 적용성이 확인되었다.

  • PDF