• Journal of Korean Port Research
• /
• v.5 no.1
• /
• pp.71-81
• /
• 1991

This study deals with the analytical and numerical solution for the combined wave reflection and diffraction near the impermeable rigid upright breakwater, subject to the excitation of a plane simple harmonic wave coming from infinity. Three cases are presented : a) the analytical solution near a thin semi-infinite breakwater, b) the analytical solution near the semi-infinite breakwaters of arbitrary edge angles, $30^{\circ},\;45^{\circ},\;and\;90^{\circ}$, c) the numerical solution near a detached thin breakwater the results are presented in amplification factor and wave height diagrams. Moreover, the amplification factors near the structure(2 wavelength before and behind the structure) are compared for the given cases. A finite difference technique for the numerical solution was applied to the integral equation obtained for the wave potential.

• Journal of the Korean Geotechnical Society
• /
• v.17 no.5
• /
• pp.17-27
• /
• 2001

지하 굴착공동의 천장면에 형성되는 잠재적 키블록의 존재성과 운동학적 거동 양상 및 안정성을 해석적으로 분석할 수 있는 시스템을 개발하였다. 천장에서 측정된 절리들의 상대적인 위치와 방향성 자료를 이용하여 데이타베이스를 구축하였으며, 굴착설계도와 연계된 전산절리도를 작성하였다. 잠재적 키블록의 존재성과 거동양상은 사면체로 가정된 블록 옆면의 3차원 공간에서의 평면식을 절리의 방향성에 의거하여 구성하며 대수학적으로 분석되었다. 블록의 안정성 분석은 자중에 의해 미끄러짐이 발생되는 블록면의 공간 기하학적 특성을 고려하여 수행하였다. 개발된 분석시스템의 현장활용성을 검증하기 위하여 언양 자수정동굴에서 키블록 형성 및 거동양상을 조사하여 분석결과와 비교하였다.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2012.10a
• /
• pp.562-567
• /
• 2012

Noises from the large scale marine propeller are calculated numerically on non-cavitation condition. The hydrodynamic analysis are carried out by potential based panel method with time marching free wake approach. The distribution of hyrodynamic loads on the propeller surface and noise signals are obtained using the unsteady Bernoulli's equation and the Farasssat formula respectively. It turns out that the noise signal shows strong peak at the blade passage frequency. Noise signals and directivity patterns for both the thickness and the loading noise are compared with each other. The directivity pattern for the loading noise shows minor lobe at the backward side of the rotating disc plane.

• 제어로봇시스템학회:학술대회논문집
• /
• 1988.10b
• /
• pp.826-831
• /
• 1988

This paper presents an approach to segment an image into areas of surfaces, and to compute the surface properties from a gray-scale image in order to describe the surfaces for reconstruction of the 3-D shape of the objects. In general, an rigid body has several surfaces and many edges. But if it is not polyhedoron, it is necessary not only to describe the relation between surfaces, i.e. its line drawings but also to represent the surfaces' equations itself. In order to compute the surfaces' equation we use a probability of edge distribution. At first it is extracted edges from a gray-level image as much as possible. These are not only the points that maximize the change of an image intensuty but candidates which can be seemed to be edges. Next, other character of a surface (color, coordinates and image intensity) are extracted. In our study, we call the all feature of a surface as "texture", for example color, intensity level, orientation of an edge, shape of a surface and so on. These features of a surface on a pixel of an image plane are mapped to a point of the feature space, and segmented to each groups by cluster analysis on this space. These groups are considered to represent object surface in an image plane. Finally, the states of object surface in 3-D space are computed from distributional probability of local and overall statistical features of a surface, and from shape of a surface.a surface.

• Journal of Korean Academy of Oral and Maxillofacial Radiology
• /
• v.7 no.1
• /
• pp.31-38
• /
• 1977

A study was performed to investigate the size of tongue area and intermaxillary space area, and compare the sexual differences between normal Korean children and adults by introducing planimetric and linear analysis of the lateral cephalograms. The cephalograms were composed of 41 child male aged 10.8, 40 child female aged 10.5, 38 adult male aged 21.3 and 40 adult female aged 20.8 respectively. In order to study and measure the intermaxillary space area, the followings were selected, as reference items: occlusal plane, anterior intermaxillary space height, posterior intermaxillary space height, length of intermaxillary space. Among those reference items anterior intermaxillary space height and posterior intermaxillary space height were perpendicular to the maxillary plane. An. index, (equation omitted) While the tongue area was plotted by outline of tongue shadow, above a line extending from the vallecula to the most anterior point on the hyoid body, and above a line from the most anterior point of the hyoid body to the menton. The obtained results were as follows: 1. In general the measurements of male were larger than those of female in intermaxillary space area in childhood and adulthood group. but intermaxillary space area of childhood group showed no significant sexual difference, and that of adulthood group showed significant sexual difference when evaluated statistically. 2. In both groups the measurements of male were larger than those of female in tongue area and there are also statistical significance of sexual differences in both age groups. 3. Considerable growh changes between the childhood and adulthood groups were revealed in intermaxillary space area and tongue area, and the tongue had tendency to become relatively smaller when compared with the intermaxillary space in both sex.

• The Journal of Engineering Geology
• /
• v.31 no.3
• /
• pp.269-281
• /
• 2021

Land creeping is the imperceptibly slow, steady, downward movement o f slope-forming soil or rock. Because creep-related failures occur frequently on a large scale without notice, they can be hazardous to both property and human life. Korea Forest Service has operated the prevention and response system from land creeping which has been on the rise since 2018. We categorized and proposed three survey steps (e.g., preliminary, regional, detailed) for investigation of creeping susceptibility site with a focus on geophysical mapping of a selected test site, Yongheung-dong, Pohang, Korea. The combination of geophysical (dipole-dipole electrical resistivity tomography and reciprocal seismic refraction technique, well-logging), geotechnical studies (standard penetrating test, laboratory tests), field mapping (tension cracks, uplift, fault), and comprehensive interpretation of their results provided the reliable information of the subsurface structures including the failure surface. To further investigate the subsurface structure including the sliding zone, we performed high-resolution geophysical mapping in addition to the regional survey. High-resolution seismic velocity structures are employed for stability analysis because they provided more simplified layers of weathering rock, soft rock, and hard rock. Curved slip plane of the land creeping is effectively delineated with a shape of downslope sliding and upward pushing at the apex of high resistive bedrock in high-resolution electrical resistivity model with clay-mineral contents taken into account. Proposed survey steps and comprehensive interpretation schemes of the results from geological, geophysical, and geotechnical data should be effective for data sets collected in a similar environment to land-creeping susceptibility area.

• Korean Journal of Optics and Photonics
• /
• v.33 no.6
• /
• pp.275-286
• /
• 2022

As a first step in the optical design process, we derive a recursive numerical calculation method that can give a solution to the Gaussian equation that the paraxial rays satisfy. Given the refractive power, the angle of incidence to the first principal plane of the lens, the angle of exit to the second principal plane of the lens, and the distance between the principal planes, the radii of curvature of the front and back surfaces of a lens can be obtained by applying the recursive numerical calculation method proposed in this paper according to the thickness of the lens. If a module consists of two or more lenses, the thickness and radius of curvature of each lens can be similarly determined after selecting the distance between the principal planes of the lens under the condition of the design specification while increasing the number of lenses one by one.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.39 no.11
• /
• pp.1183-1189
• /
• 2015

This study focuses on the design of the tapered joints of a wind power turbine. The main variables of the tapered joint are the transmitted torque, shaft diameter, contact area of the tapered ring, and tightening torque of the bolts, which applies a compressive pressure from the hub to the shaft. The stress distribution of the taper fit was calculated under axisymmetric plane strain conditions because of the small taper angle. The axial displacement of the clamp can be calculated from the radial elastic deformation and the taper angle. The stress field of each ring is obtained from the cylinder stress equation. To verify the accuracy of the calculation, finite element (FE) analysis was performed, and the results of the calculation and FE analysis were compared. The hoop stress of the tapered surface showed a discrepancy of approximately 10, but the trends of the stress distributions of each component and the relative movement obtained by FE analysis were in good agreement with the analytical calculation results.

• Journal of the Society of Naval Architects of Korea
• /
• v.38 no.1
• /
• pp.72-85
• /
• 2001

A study for the structural strength evaluation on the doubler plate subjected to the biaxial in-plane compression has been performed through the systematic evaluation process. In order to estimate the proper static strength of doubler plate, elasto-plastic large deflection analysis is introduced including the contact effect between main plate and doubler. The characteristics of stiffness and strength variation are discussed based on their results. A1so, in order to compare the doubler structure with the original strength of main plate without doubler, a simple formula for the evaluation of the equivalent flat plate thickness is derived based on the additional series analysis of flat plate structure. Using this derived equation, the thickness change of a equivalent flat plate is analyzed according to the variation of various design parameters of doubler plate and some design guides are suggested in order to maintain the original strength of main plate without doubler reinforcement. Finally, correlation between derived equivalent flat plate formula and the developed buckling strength formulas by author et a1. is discovered and these relations are formulated for the future development of simple strength evaluation formula of doubler plate structure.

• Journal of Korean Society of Steel Construction
• /
• v.21 no.3
• /
• pp.277-287
• /
• 2009

The objective of this study was to experimentally investigate the structural behavior of steel plate concrete walls with vertical ribs (SSC walls), to compare the experimental results with the currently applied evaluation equations, and to obtain information that would be useful in the development of design equations for SSC walls. SSC test specimens that were subjected to in plane shear forces and bending moments were fabricated and tested. The experimental results show that the effect of vertical ribs on the structural behavior of SSC walls may be neglected, and that the confinement effect of concrete on the steel plates on both sides of the walls was negligible. The comparison of the experimental results with the evaluation equations showed that the structural behavior of SSC walls under shear control is close to that of the evaluation equations, but that the behavior of SSC walls under larger bending moments is not very close to that of the evaluation equations. The current evaluation equations for USC walls may be applied to the design of SSC walls because the structural walls of nuclear power plants are not subjected to large in plane bending moments.