• Journal of Welding and Joining
• /
• v.18 no.3
• /
• pp.106-113
• /
• 2000

Single crystallization behavior ad high temperature tensile properties of TLP bonded joints of Ni-base single crystal superalloy, CMSX-2 were investigated using MBF-80 and F-24 insert metals. CMSX-2 was bonded at 1523~1548K for 1.5~1.8ks in vacuum. The (100) orientation of bonded specimen was aligned perpendicular to the joint interface. Crystallographic orientation analyzed points over the bonded region possessed the almost same orientation across the joint interface and misorientation $\Delta^{\theta}$ was negligibly small in as-bonded and post-bond heat-treated situations. It was confirmed that single crystallization could be readily achieved during TLP bonding. The tensile strengths of all joints at elevated temperatures were equal to or greater than those of base metal the range of testing temperature between 923K and 1173K. The elongation and reduction of area in values were almost the same as those of base metal. SEM observation of the fracture surfaces of joints after tensile test revealed that the fracture surface indicated the similar morphologies each other, and that the fracture of joints occurred in the base metal in any cases.

• The Bulletin of The Korean Astronomical Society
• /
• v.39 no.2
• /
• pp.84.1-84.1
• /
• 2014

This research is to study the effects of individual element(C, N, O, Na, Mg, Al, Si, and Fe) on the standard stellar models. Our work is different from previous works in two aspects. Firstly, we have chosen to maintain helium abundance and other metal elements as target elements were changed. This is to see the effects more clearly, without further complication. Secondly, the amount of enhancement or reduction in each element has been based on the recent observation of stars in globular clusters. For comparison study with observation of the globular clusters, the mass and metallicity grids of the standard stellar models have been constructed in range $0.7{\sim}1.0M{\odot}$ and 0.0002~0.007, respectively. The opacity as a function of depth in stellar models at equal evolutionary point, as well as the evolutionary tracks, have been analyzed. The quantified shifts of the evolutionary tracks for the stellar models which have changed abundance of individual element and the astronomical meaning with physical reasons which produce the results, are going to be presented in this talk.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.22 no.1
• /
• pp.98-105
• /
• 2011

Reduced complexity codebook searching for Quantized Equal Gain Transmission(QEGT) is proposed over MIMO-OFDM systems. QEGT codebook is divided into M groups of Q index members. Each group has a representative index. At the 1st stage only the representative indices are searched then the best index is selected. At the 2nd stage the optimum index is determined only among the group of the selected representative index. This strategy reduces the overall index search algorithm comparing to the conventional methods. Monte-Carlo simulation shows that the searching complexity is reduced, but the link-level performance is still almost the same as the conventional methods when the number of transmission antennas are 3 to 7.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.17 no.12
• /
• pp.1337-1340
• /
• 2004

The self-assembled monolayers of alkane derivatives with sulfur containing head groups on gold substrates have been widely examined recently, since the binding between S atoms and Au surface is strong. The viologen has been widely investigated their well-behaved electrochemistry including electron transfer mediation, the surface-enhanced of the adsorption and the behavior of supramolecular assemblies at electrode surfaces in theses and various studies. Yiologen monolayers are formed onto QCM by self-assembly method. We studied the relationship of electron transfer from changing the anions in 0.1 M NaCl and NaClO$_4$ electrolyte solution. The EQCM measurements revealed the anions transfer during reduction and oxidation, respectively From the EQCM data, the well-defined shape peaks were nearly equal charges by cyclic voltammetry.

• Proceedings of the Korean Operations and Management Science Society Conference
• /
• 2003.05a
• /
• pp.474-479
• /
• 2003

This paper addresses the problem of B-spline surface interpolation to serial contours, where the number of points varies from contour to contour. A traditional lofting approach creates a set of B-spline curves via B-spline curve interpolation to each contour, makes them compatible via degree elevation and knot insertion, and performs B-spline surface lofting to get a B-spline surface interpolating them. The approach tends to result in an astonishing number of control points in the resulting B-spline surface. This situation arises mainly from the inevitable process of progressively merging different knot vectors to make the B-spline curves compatible. This paper presents a new approach for avoiding this troublesome situation. The approach includes a novel process of getting a set of compatible B-spline curves from the given contours. The process is based on the universal parameterization [1,2] allowing the knots to be selected freely but leading to a more stable linear system for B-spline curve interpolation. Since the number of control points in each compatible B-spline curve is equal to the highest number of contour points, the proposed approach can realize efficient data reduction and provide a compact representation of a B-spline surface while keeping the desired surface shape. Some experimental results demonstrate its usefulness and quality.

• The Journal of the Acoustical Society of Korea
• /
• v.23 no.5
• /
• pp.410-419
• /
• 2004

In this paper. we propose a method of confidence measure fusion under Bayesian framework for speech recognition. Centralized and distributed schemes are considered for confidence measure fusion. Centralized fusion is feature level fusion which combines the values of individual confidence scores and makes a final decision. In contrast. distributed fusion is decision level fusion which combines the individual decision makings made by each individual confidence measuring method. Optimal Bayesian fusion rules for centralized and distributed cases are presented. In isolated word Out-of-Vocabulary (OOV) rejection experiments. centralized Bayesian fusion shows over 13% relative equal error rate (EER) reduction compared with the individual confidence measure methods. In contrast. the distributed Bayesian fusion shows no significant performance increase.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.15 no.3
• /
• pp.301-310
• /
• 2004

In this paper, a compact dual-mode filter structure without coupling gaps is proposed. The novel design is achieved by embedding a pair of equal crossed slots and spur-lines. Without coupling gaps between feed lines and patch resonator, the new filter can provide low insertion loss. It is found that this design has wide coupling range for dual-mode operation. It means that these characteristics of the proposed filter can reduce uncertainty in fabrication. By using two PIN diodes mounted inside a pair of spur-lines, the proposed structure works as a switchable filter. Also, it has a size reduction of about 34.7 %, compared with conventional dual-mode filters.

• Asian-Australasian Journal of Animal Sciences
• /
• v.3 no.3
• /
• pp.231-242
• /
• 1990

A study is reported which investigated the additive nature of digestible energy (DE) from dietary nutrients and to estimate the relative energy values of different energy-yielding nutrients in practical trout diets. A growth study was conducted over 12 weeks with 6 diets. Rainbow trout (Oncorhynchus mykiss) were fed diets once a day ad libitum. Digestible energy values determined and calculated had direct relationship indicating additive nature of such values for feed ingredients. Overall growth performance was best in a diet containing 33% digestible protein (DP) with a DP/DE ratio of 18.6. A reduction in digestible protein level with the same DP/DE rat io led to a significant decrease in growth and feed efficiency. The increase of 7% of lipid with concomitant decrease in protein resulted in the relative gain of 130% in growth and nutrient retention, suggesting that 1 g of lipid is equal to about 1.3 g of proteins in terms of net energetic value. Replacement of 10% of dietary lipid by carbohydrates led to a slight decrease in energy retention efficiency but to a great increase in lipid retention efficiency (130%) showing that dietary carbohydrates led to increased lipogenesis.

• Journal of Korean Medical classics
• /
• v.21 no.2
• /
• pp.87-99
• /
• 2008

From pathological view, Gwoleumbyeong(厥陰病) may be explained as extreme reduction of Gwoleumgyeonggi(厥陰經氣) due to immoderate Wihan(胃寒). Also, concerning regions of human body, Gwoleumbyeong has close relation to lower abdomen and genital, which are the origins of Gwoleum meridian[厥陰經]. Therefore, it is appropriate that the nature of Gwoleumbyeong be described as Hangeukyangul(寒極陽鬱), rather than Sangyeolhahan(上熱下寒), Hanyeolchakjap(寒熱錯雜). Sangyeolhahan, Hanyeolchakjap does not represent Gwoleumbyeong to the full extent, in a sense that the term views Hanyeol(寒熱) as two equal rank, whereas pathogenesis of Gwoleumbyeong depends on the sole extremity of Wihan(胃寒). The reason that the nature of sanghallon(傷寒論) be regarded as Sangyeolhahan, Hanyeolchakjap has been lying on the presupposition that whole symptoms of Hangwol (寒厥), Yeolgwol(熱厥), diarrhea[下利], vomiting[嘔吐] and hiccup, from "Gwoleumpyeon(厥陰篇)",may be categorized into Gwoleumbyeong. However, the symptoms described above do not show Gihwa(氣化) characteristic of Gwoleum(厥陰) and follow the regional distribution of Gwoleumbyeong, from which it can be pointed that those symptoms have no relation with Gwoleumbyeong. Ever since the theory of Yukgigihwa(六氣氣化) was used to comprehend and interpret "Sanghallon", Gwoleumbyeong has been thought as equivalence of Gwol(厥), which led to misunderstanding of Sangyeolhahan, Hanyeolchakjap. However, Gwoleumbyeong from "Sanghallon" has been argued in specific, through the historical practice of Sanghan(傷寒) as pathogen, particular state of meridian and correlation of meridian and Byeongjeung(病證).

• Journal of the Korean Society for Precision Engineering
• /
• v.34 no.2
• /
• pp.77-81
• /
• 2017

CP (Commercially Pure) titanium has been widely used in various industries such as in energy plants and bio-materials because of an excellent corrosion resistance and its non-toxicity to the human body. But there are limitations for usage as structural materials due to low strength. The tensile properties of CP titanium could be improved by microstructure refinement such as in a SPD (Severe Plastic Deformation) process. However, high strengthening of CP titanium wire is impossible by SPD processes like ECAP (Equal Channel Angular Pressing), HPT (High-Pressure Torsion), and the ARB (Accumulative Roll Bonding) process. The study purposes are to increase the strength of CP titanium wire by optimization of the cold drawing process and the harmonization with mechanical properties by heat treatments for the next forming process. The optimization process was investigated with regard to the design of drawing dies and the reduction ratio of cross sections. The elongations of high strength CP titanium were controlled by heat treatment.