Browse > Article
http://dx.doi.org/10.7736/KSPE.2017.34.2.77

Drawing Process Design and Mechanical Properties Control for High Strengthening of CP Titanium  

Choi, Seong Woo (Titanium Department, Korea Institute of Materials Science)
Park, Chan Hee (Titanium Department, Korea Institute of Materials Science)
Lee, Sang Won (Titanium Department, Korea Institute of Materials Science)
Yeom, Jong Taek (Titanium Department, Korea Institute of Materials Science)
Hong, Jae Keun (Titanium Department, Korea Institute of Materials Science)
Publication Information
Journal of the Korean Society for Precision Engineering / v.34, no.2, 2017 , pp. 77-81 More about this Journal
Abstract
CP (Commercially Pure) titanium has been widely used in various industries such as in energy plants and bio-materials because of an excellent corrosion resistance and its non-toxicity to the human body. But there are limitations for usage as structural materials due to low strength. The tensile properties of CP titanium could be improved by microstructure refinement such as in a SPD (Severe Plastic Deformation) process. However, high strengthening of CP titanium wire is impossible by SPD processes like ECAP (Equal Channel Angular Pressing), HPT (High-Pressure Torsion), and the ARB (Accumulative Roll Bonding) process. The study purposes are to increase the strength of CP titanium wire by optimization of the cold drawing process and the harmonization with mechanical properties by heat treatments for the next forming process. The optimization process was investigated with regard to the design of drawing dies and the reduction ratio of cross sections. The elongations of high strength CP titanium were controlled by heat treatment.
Keywords
CP titanium; High strength; Drawing process; Fine grain;
Citations & Related Records
연도 인용수 순위
  • Reference
1 Lee, T. K., "Development and Application of Shape Drawing Process Design Program Using Visual LISP," M.Sc. Thesis, Pusan National University, 2010.
2 Kim, N. and Kim, H. J., "Plastic Processing and Analysis," Munbook, 2002.
3 Lee, D. N., "Plastic Engineering," Munbook, 2005.
4 Lee, Y. T., "Titanium," Korea Metal Journal, 2009.
5 Zherebtsov, S., Dyakonov, G., Salem, A., Malysheva, S., Salishchev, G., et al., “Evolution of Grain AND Subgrain Structure during Cold Rolling of Commercial-Purity Titanium,” Materials Science and Engineering: A, Vol. 528, No. 9, pp. 3474-3479, 2011.   DOI
6 Srinivasan, N., Velmurugan, R., Kumar, R., Singh, S. K., and Pant, B., "Deformation Behavior of Commercially Pure (CP) Titanium under Equi-Biaxial Tension," Materials Science and Engineering: A, Vol. 674, pp. 540-551, 2016.   DOI
7 Azushima, A., Kopp, R., Korhonen, A., Yang, D., Micari, F., et al., “Severe Plastic Deformation (SPD) Processes for Metals,” CIRP Annals-Manufacturing Technology, Vol. 57, No. 2, pp. 716-735, 2008.   DOI
8 Meyers, M. A., Mishra, A., and Benson, D. J., “Mechanical Properties of Nanocrystalline Materials,” Progress in Materials Science, Vol. 51, No. 4, pp. 427-556, 2006.   DOI
9 Kumar, K., Van Swygenhoven, H., and Suresh, S., “Mechanical Behavior of Nanocrystalline Metals and Alloys,” Acta Materialia, Vol. 51, No. 19, pp. 5743-5774, 2003.   DOI
10 Dyakonov, G., Mironov, S., Zherebtsov, S., Malysheva, S., Salishchev, G., et al., "Grain-Structure Development in Heavily Cold-Rolled Alpha-Titanium," Materials Science and Engineering: A, Vol. 607, pp. 145-154, 2014.   DOI
11 Ko, Y. G., Shin, D. H., Park, K.-T., and Lee, C. S., “An Analysis of the Strain Hardening Behavior of Ultra-Fine Grain Pure Titanium,” Scripta Materialia, Vol. 54, No. 10, pp. 1785-1789, 2006.   DOI
12 Kobayashi, M., “The Present Situation of Cold Drawn Special Section,” Journal-Japan Society for Technology of Plasticity, Vol. 39, No. 447, pp. 335-337, 1998.
13 Avitzur, B., "Metal Forming: Processes and Analysis," Mcgraw-Hill, New York, 1968.
14 Sachs, G., "On the Theory of the Drawing Process (in German), Z. Angew," Mathematics U Mechanics, Vol. 7, pp. 235-236, 1927.   DOI
15 Siebel, E., "Die Formgebung im Bildsamen Zustande : Theoretische Grundlagen der Technischen Formgebungsverfahren," Dusseldorf Stahleisen, 1932.
16 Lange, K., "Handbook of Metal Forming," Mcgraw-Hill, p. 1216, 1985.
17 Kobayashi, M., "The Present Situation of Cold Drawn Special Section (in Japan)," Journal of the Japan Society for Technology of Plasticity, Vol. 39, No. 447, pp. 335-337. 1998.
18 Geleji, S., "Bildsame Formung der metalle in Rechnung und Versuch," Berlin, 1960.