• The Journal of Advanced Prosthodontics
• /
• 제6권1호
• /
• pp.60-65
• /
• 2014

Teeth that have short clinical crown, which are not alone enough to support the definitive restoration can be best treated using the post and core system. The advantages of fiber post over conventional metallic post materials have led to its wide acceptance. In addition to that the combination of aesthetic and mechanical benefits of fiber post has provided it with a rise in the field of dentistry. Also the results obtained from some clinical trials have encouraged the clinicians to use the fiber posts confidently. Fiber posts are manufactured from pre-stretched fibers impregnated within a resin matrix. The fibers could that be of carbon, glass/silica, and quartz, whereas Epoxy and bis-GMA are the most widely used resin bases. But recently studies are also found to be going on for polyimide as possible material for the fiber post resin base as a substitute for the conventional materials.

• 공업화학
• /
• 제10권5호
• /
• pp.701-706
• /
• 1999

실록산 올리고머가 에폭시 수지의 열안정성 및 내부 응력에 미치는 영향에 대해서 고찰하였다. 분자 말단에 에폭시기를 갖는 실록산-에폭시 중합체를 실록산-DDM 예비 중합체와 DGEBA계 에폭시 수지를 반응시켜 제조하였다. TGA 데이터를 사용하여 열분해 개시 온도(initial decomposition temperature, IDT), 최대 중량 감소 시의 온도(temperature of maximum rate of weight loss, $T_{max}$), 적분 열분해 진행 온도(integral procedural decomposition temperature, IPDT), 그리고 분해 활성화 에너지($E_t$) 등을 구한 후 측정된 열안정성은 실록산 올리고머의 함량이 증가함에 따라 증가하였으며 5wt%의 실록산 올리고머를 함유한 조성에서 최대값을 나타내었다. 본 블렌드의 열팽창 계수(coefficient of thermal expansion, ${\alpha}_r$)와 굴곡 탄성률($E_r$)로부터 내부응력을 구하였으며, 실록산 올리고머의 함량이 증가할수록 ${\alpha}_r$와 $E_r$가 동시에 감소해 내부응력이 규칙적으로 저하되었다.

• 한국재료학회지
• /
• 제11권12호
• /
• pp.1009-1013
• /
• 2001

The effects of coupling agent on the interface characteristics between epoxy resin and natural zeolite were studied by SEM, optical microscope and universal testing machine (UTM). Epoxy resin as a matrix was diglycidyl ether of bisphenol A (DGEBA)/4,4'-methylene dianiline (MDA)/malononitrile (MN) system and natural zeolite as an inorganic fillet was produced in Korea. With the increment of zeolite content, tensile strength decreased and it was due to the different elastic moduli of two materials. When external stress was loaded on the composites, the stress concentrated on the weakly bonded interface and crack grew easily. To improve the interface characteristics, the surface of the natural zeolite was treated with the silane coupling agent and it was found that the tensile strength was increased. The morphology of the interface showed that the bonding characteristics were modified by coupling agent.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1999년도 추계학술대회 논문집 학회본부 C
• /
• pp.994-996
• /
• 1999

Hygrothermal aging at the elevated temperature induces the long-term degradation of the epoxy resin. We investigated the effects of hydrothermal stress on the dielectric breakdown phenomena of epoxy composite filled with natural zeolite. The cured specimens absorbed the moisture in the autoclave at $120^{\circ}C$. $T_g$ of the deteriorated composite by moisture absorption decreased. The dielectric breakdown strength decreased with the moisture absorption cycle. It was concluded that the thermal stress and the high water-vapour-pressure deteriorated the natural zeolite filled epoxy resin system, consequently and the tree growth rate increased.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 1999년도 춘계학술대회 논문집
• /
• pp.544-547
• /
• 1999

To develop the better insulants. the zeolite particle, which is aluminosilicate mineral, was filled In the DGEBA/MDA/SN epoxy resin system. Dynamic DSC curves of cured specimens with various contents of zeolite were observed and the glass transition temperature(T$_{g}$) was obtained. According to this result, we could carry out the experiment concerned with the dielectric breakdown strength around T$_{g}$ and find the limit temperature for the application of the DDEBA/MDA/SN system filled with natural zeolite. T$_{g}$ increased with the content of zeolite. As the temperature increased, the dielectric breakdown strength decreased rapidly, in the region of T$_{g}$. At the high temperature, the deterioration by electrical stress was activated. The diameter of puncture at the high temperature was larger 7han that at the room temperature.erature.

• Steel and Composite Structures
• /
• 제24권2호
• /
• pp.191-200
• /
• 2017

Impact resistance and weight are important features for ballistic materials. Kevlar fibres are the most widely reinforcement for military and civil systems due to its excellent impact resistance and high strength-to-weight ratio. Kevlar fibres or spectra fiber composites are used for designing personal body armour to avoid perforation. In this study, the ballistic impact behaviour of Kevlar/filled epoxy matrix is investigated. Three different fillers, nanoclay, nanocalcite and nanocarbon, were used in order to increase the ballistic impact performance of Kevlar-epoxy composite at lower weight. The filler, nanoclay and nanocalcite, content employed was 1 wt.% and 2 of the epoxy resin-hardener mixture while the nanocarbon were dispersed into the epoxy system in a 0.5%, 1% and 2% ratio in weight relating to the epoxy matrix. Specimens were produced by a hand lay-up process. The results obtained from ballistic impact experiments were discussed in terms of damage and perforation. The experimental tests revealed a number of damage mechanisms for composite laminated plates. In the ballistic impact test, it was observed whether the target was perforated completely penetrated at the back or not. The presence of small amounts of nanoclay and nanocalcite dispersed into the epoxy system improved the impact properties of the Kevlar/epoxy composites. The laminates manufactured with epoxy resin filled by 1 wt.% of nanoclay and 2 wt% nanocalcite showed the best performance in terms of ballistic performance. The addition of nanocarbon reduced ballistic performance of Kevlar-epoxy composites when compared the results obtained for laminates with 0% nanoparticles concentration.

• 한국염색가공학회지
• /
• 제30권3호
• /
• pp.180-189
• /
• 2018

To study the effect of stereoisomeric structures of curing agents on curing behaviors, thermal and mechanical properties of epoxy resins, DGEBA(diglycidyl ether of bisphenol A) epoxy resin and 3,3'- and 4,4'-DDS(diaminodiphenyl sulfone) curing agents were selected. The curing initiation temperature and activation energy of DGEBA/3,3'-DDS was lower than DGEBA/4,4'-DDS. DGEBA/3,3'-DDS has a faster curing rate and higher degree of cure than DGEBA/4,4'-DDS, suggesting that 3,3'-DDS has higher reactivity than 4,4'-DDS. Tensile strength and fracture toughness of DGEBA/3,3'-DDS was lower than those of DGEBA/4,4'-DDS, indicating that mechanical properties of the epoxy resin can be different only by the stereoisomeric difference in chemical structure of the curing agent.

• 폴리머
• /
• 제25권2호
• /
• pp.168-176
• /
• 2001

새로운 열잠재성 개시제로서 N-crotyl-N,N-dimethyl-4-methylanilinium hexafluoroan-timonate (CMH) 촉매가 diglycidylether of bisphenol A (DGEBA) 에폭시 양이온 중합계의 열적, 유변학적 특성 및 열정성에 미치는 영향에 대해 연구하였다. DSC에 의한 DGEBA/CMH 경화계의 열분석 결과, 본 경화계는 일정 온도까지 우수한 잠재성을 지닌 반응 기구임을 확인할 수 있었으며, 특히 개시제의 함량이 증가할수록 CMH의 높은 활성에 의해 DGEBA의 전환율 및 경화반응 속도가 증가하였다. 유변학적 특성은 레오미터를 사용하여 등온 조건 하, 저장 탄성율(G'), 손실 탄성율(G") 그리고 damping factor (tan $\delta$)를 구한 후 이들 데이터로부터 겔화 시간을 측정하였다. 실험 결과 경화 온도 및 CMH의 증가에 따른 활성의 차이로 인하여 에폭시 양이온 중합의 네트워크 구조 형성에 영향을 미쳐 겔화 시간이 단축됨을 알 수 있었다. 형성된 네트워크 구조의 열안정성은 TGA 분석을 통해 분해 활성화 에너지 및 열안정성 인자 등의 측정으로 고찰하였다.찰하였다.

• 한국염색가공학회지
• /
• 제29권2호
• /
• pp.77-85
• /
• 2017

The interfacial adhesion between fiber and matrix affects the physical properties of fiber reinforced composites. In this study, 3-(Methacryloyloxy)propyltrimethoxy silane(MPS) coupling agent was used to increase the interfacial adhesion between polyketone fiber and epoxy resin. The change of surface chemical composition of polyketone fiber treated with MPS was analyzed using a FTIR-ATR. The interfacial bonding between fiber and resin increased with silane coupling agent largely. Consequently, interfacial shear strength(IFSS) was enhanced with increasing concentration of MPS coupling agent and thus, the physical properties of the composites such as flexural properties and dynamic mechanical properties were changed. Flexural strength and modulus increased when the MPS concentration was higher than 0.5wt%. The dynamic storage modulus of Polyketone/Epoxy composites treated with MPS was higher than that of the untreated one. When the MPS concentration of 3wt%, the highest storage modulus was obtained.

• Transactions on Electrical and Electronic Materials
• /
• 제17권3호
• /
• pp.155-158
• /
• 2016

The effect of microsilica content modified with silicone-modified epoxy on electrical and mechanical properties of cycloaliphatic epoxy/microsilica system was investigated. The cycloaliphatic epoxy resin was diglycidyl 1,2-cyclohexanedicarboxylate and curing agent was an anhydride. Surface of microsilica was modified with silicone-modified epoxy. Electrical breakdown strength, the most important property for electrical insulation materials was tested. Tensile and flexural tests were also performed using universal testing machine (UTM). The microcomposite with 60 wt% microsilica shows maximum values in electrical breakdown strength.