• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2000년도 제18회 학술발표회 논문개요집
• /
• pp.26-26
• /
• 2000

High quality epitaxial Y2O3 thin films were prepared on Si(111) and (001) substaretes by using ion beam assisted deposition. As a substrate, clean and chemically oxidized Si wafers were used and the effects of surface state on the film crystallinity were investigated. The crystalline quality of the films were estimated by x-ray scattering, rutherford backscattering spectroscopy/channeling, and high-resolution transmission electron microscopy (HRTEM). The interaction between Y and Si atoms interfere the nucleation of Y2O3 at the initial growth stage, it could be suppressed by the interface SiO2 layer. Therefore, SiO2 layer of the 4-6 layers, which have been known for hindering the crystal growth, could rather enhance the nucleation of the Y2O3 , and the high quality epitaxial film could be grown successfully. Electrical properties of Y2O3 films on Si(001) were measured by C-V and I-V, which revealed that the oxide trap charge density of the film was 1.8$\times$10-8C/$\textrm{cm}^2$ and the breakdown field strength was about 10MV/cm.

• 한국진공학회지
• /
• 제11권1호
• /
• pp.16-21
• /
• 2002

$Si_2H_6$가스를 이용한 LPCVD내에서의 실리콘의 선택적 에피텍시 성장을 $1000^{\circ}C$ 이하의 초청정 분위기하의 저온에서 수행하였다. HCI 첨가없이 초청정 공정으로 인한 양질의 에피텍시 Si층이 균일하게 얻어 졌으며, $SiO_2$위에 증착된 실리콘의 잠복기를 발견할 수 있었다. 단결정위의 에피텍시 층은 산화물 층위 보다 더 두껍게 증착되었다. 산소첨가로 잠복기가 20~30초간 증가하였다. 증착된 박막의 절단면과 표면 형상은 SEM으로 관찰되었으며, XRD를 통해 막질을 평가하였다.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2013년도 제45회 하계 정기학술대회 초록집
• /
• pp.129.1-129.1
• /
• 2013

Atomically-thin graphene is the ideal model system for studying nanoscale friction due to its intrinsic two-dimensional anisotropy. Here, we report the reduced nanoscale friction of epitaxial graphene on SiC, investigated with conductive-probe atomic force microscopy/friction force microscopy in ultra-high vacuum. The measured friction on a buffer layer was found to be 1/8 of that on a monolayer of epitaxial graphene. Conductive probe atomic force microscopy revealed a lower conductance on the buffer layer, compared to monolayer graphene. We associate this difference in friction with the difference in total lateral stiffness. Because bending stiffness is associated with flexural phonons in two-dimensional systems, nanoscale frictional energy should primarily dissipate through damping with the softest phonons. We investigated the influence of hydrogen intercalation on the nanoscale friction. We found that the friction decreased significantly after hydrogen intercalation, which is related to loose contact between the graphene and the substrate that results in a lower bending stiffness.

• 한국결정성장학회지
• /
• 제26권3호
• /
• pp.89-94
• /
• 2016

본 연구에서는 HVPE(Hydride Vapor Phase Epitaxy)를 이용하여 각각 다른 V/III ratio를 가지는 multi-step의 성장 시간 변화에 따라 r-plane 사파이어 위에 성장되는 a-plane GaN 에피층의 결정성에 대하여 연구하였다. 또한 이번 연구의 결과를 선행 연구에서 single-step으로 r-plane 사파이어 위에 성장시킨 a-GaN 에피층의 결과와 비교하였다. Multi-step으로 r-plane 사파이어 위에 a-plane GaN 에피층을 성장시켰을 때, source HCl의 유량과 성장 시간이 증가함에 따라 a-plane GaN 에피층에 대한 rocking curve의 FWHM(Full Width at Half Maximum) 값이 감소하였다. 높은 source HCl의 유량을 갖는 first step과 second step의 성장 시간과 source HCl의 유량이 증가할수록 a-plane GaN 에피층 내부의 void가 감소하였다. 결과적으로 first step과 second step의 성장 시간이 가장 긴 조건에서 성장된 a-plane GaN 에피층이 가장 낮은 FWHM 값인 584 arcsec을 가지며, azimuth angle의 의존도가 가장 적은 것으로 확인되었다.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2002년도 하계학술대회 논문집
• /
• pp.463-465
• /
• 2002

In order to increase perpendicular magnetic anisotropy of magnetic layer and prepare magnetic recording layer with a good quality by epitaxial growth between magnetic layer and, we prepared Co$\_$77/Cr$\_$20/Ta$_3$/Si doublelayer for perpendicular magnetic recording media which was promoted as next generation recording media on slide glass substrate. The thickness of magnetic layer and Underlayer were varied from 20 to 100 nm and 5 to 100 m, respectively. The surface morphology and crystal structure of the CoCrTa/Si film were examined with XRD and AFM. Prepared thin films showed improvement of dispersion angle of c-axis orientation Δ$\theta$$\_$50/ caused by inserting amorphous Si underlayer.

• 한국결정성장학회지
• /
• 제1권1호
• /
• pp.82-91
• /
• 1991

분자선속 방법으로 실리콘 기판위에 GaAs의 에피층을 생장하고, 이를 분석한 결과를 보고한다. 두 종류의 실리콘 기판에 생장 조건을 다르게 한 시료를 준비하고, SEM, TEM, X-ray회절, PL, Hall 등의 방법으로 분석하였다. 결정면에서 약간 기울여 절삭한 기판에 이단계 성장법으로 성장한 에피층이 보다 좋은 결정 구조를 갖으며, multi-quantum well buffer layer를 삽입하는 것이 stress 해소 등에 도움이 된다. 또 GaAs 에피층은 저절로 실리콘으로 doping이 되는데, exciton bound 에너지 준위를 통한 radiative recombination은 homoepitaxial GaAs 에피층보다 잘 일어나지 않는 것으로 관측되었다.

• 한국표면공학회지
• /
• 제29권6호
• /
• pp.839-846
• /
• 1996

Epitaxial (La, Sr)$CoO_3/Pb(Zr,\;Ti)O_3/(La,\;Sr)CoO_3$by pulsed laser deposition for ferroelectric field effect transistor. Epitaxial $LaCoO_3/Pb(Zr,\;Ti)O_3/(La,\;Sr)CoO_3$ heterostructures exhibited 70$\mu C/cm^2$ and 17 $\mu C/cm^2$at a positively and negatively poled states, respectively. On the other hand, epitaxial (La, Sr)$CoO_3/Pb(Zr,\;Ti)O_3/LaCoO_3$heterostructures show the remnant polarization states opposite to the $LaCoO_3/Pb(Zr,\;Ti)O_3/(La,\;Sr)CoO_3$ heterostructures. This indicates that the interface between (La, Sr)$CoO_3$ (LSCO) and $Pb(Zr, Ti)O_3(PZT)$ layers affects the asymmetric polarization remanence through electrochemical nature. The resistivity of $LaCoO_3$ (LCO) layer was found to be dependent on an ambient oxygen, primarily the ambient oxygen pressure during deposition. The resistivity of the LCO layer varied in the range of 0.1-100 $\Omega$cm. It is suggested that, with an appropriate resistivity of the LCO layer, the LCO/PZT/LSCO heterostructure can be used as the ferroelectric field effect transistor.

• 한국재료학회지
• /
• 제17권5호
• /
• pp.273-277
• /
• 2007

Vertically aligned Zinc Oxide rod arrays were grown by the self-assembly hydrothermal process on the GaN epitaxial layer which has a same lattice structure with ZnO. Zinc nitrate and DETA solutions are used in the hydrothermal process. The $(HfO_2)$ thin film was deposited on GaN and the patterning was made by the photolithography technique. The selective growth of ZnO rod was achieved with the patterned GaN substrate. The fabricated ZnO rods are single crystal, and have grown along hexagonal c-axis direction of (002) which is the same growth orientation of GaN epitaxial layer. The density and the size of ZnO rod can be controlled by the pattern. The optical property of ordered array of vertical ZnO rods will be discussed in the present work.

• 한국전기전자재료학회논문지
• /
• 제33권3호
• /
• pp.173-176
• /
• 2020

This study focuses on a pillar in which is implanted a P-type maneuver under a P base. This structure is called a super junction structure. By inserting the pillar, the electric field concentrated on the P base is shared by the pillar, so the columns can be dispersed while maintaining a high breakdown voltage. Ten pillars were generated during the multi epitaxial process. The interval between pillars is varied to optimize the electric field to be concentrated on the pillar at a threshold voltage of 6 V, a yield voltage of 4,500 V, and an on-state voltage drop of 3.8 V. The density of the filler gradually decreased when the interval was extended by implanting a filler with the same density. The results confirmed that the size of the depletion layer between the filler and the N-epitaxy layer was reduced, and the current flowing along the N-epitaxy layer was increased. As the interval between the fillers decreased, the cost of the epitaxial process also decreased. However, it is possible to confirm the trade-off relationship that deteriorated the electrical characteristics and efficiency.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2009년도 9th International Meeting on Information Display
• /
• pp.700-702
• /
• 2009

We present the epitaxial growth of high-quality ZnO layers by chemical vapor transport (CVT) technique on (01-12) sapphire with a ZnO buffer layer growth by metal-organic chemical vapor deposition (MOCVD). The surface of the grown ZnO epitaxial layers has atomically flats and the RMS is 0.11 nm. PL spectrum of as-grown samples exhibits two emissions originated by interactions between photon and free excitons.