• 한국신재생에너지학회:학술대회논문집
• /
• 2006.11a
• /
• pp.529-532
• /
• 2006

Recently the production of ethanol from lignocecllulosics has received much attention due to immense potential for conversion of renewable biometerials into biofuels and chemicals. Fomitopsis palustris causes a typycal brown-rot and is unusual in that it rapidly depolymerize the cellulose in wood without removing the surrounding lignin that normally prevents microbial attack. This study demonstrated that the brown rot basidiomycete F. palustris was able to degrade crystalline cellulose. This fungus could also produce the three major cellulases (BGL, EXG and EG) when the cells were grown on 2.0% Avicel. The fungus was able to degrade both the crystalline and amorphous forms of cellulose from woody biomasses. Moreover, we found that this fungus has the processive EG like CBH which are able to degrade the crystalline region of cellulose. To establish the cellulase system in relation with degradation of woody biomass, we performed that purification, characterization and molecular cloning of a BGL, EGs and GLA from F. palustris grown on Avicel.

• Journal of Microbiology and Biotechnology
• /
• v.19 no.8
• /
• pp.845-850
• /
• 2009

Bioethanol derived from lignocellulosic biomass has the potential to replace gasoline. Cellulose is naturally recalcitrant to enzymatic attack, and it also surrounded by the matrix of xylan and lignin, which enhances the recalcitrance. Therefore, lignocellulosic materials must be pretreated to make the cellulose easily degraded into sugars and further fermented to ethanol. In this work, hydrothermal pretreatment on corn stover at $195^{\circ}C$ for 15 min with and without lower concentration of formic acid was compared in terms of sugar recoveries and ethanol fermentation. For pretreatment with formic acid, the overall glucan recovery was 89% and pretreatment without formic acid yielded the recovery of 94%. Compared with glucan, xylan was more sensitive to the pretreatment condition. The lowest xylan recovery of 55% was obtained after pretreatment with formic acid and the highest of 75% found following pretreatment without formic acid. Toxicity tests of liquor parts showed that there were no inhibitions found for both pretreatment conditions. After simultaneous saccharification and fermentation (SSF) of the pretreated corn stover with Baker's yeast, the highest ethanol yield of 76.5% of the theoretical was observed from corn stover pretreated at $195^{\circ}C$ for 15 min with formic acid.

• Journal of Microbiology and Biotechnology
• /
• v.28 no.12
• /
• pp.2036-2045
• /
• 2018

An endo-${\beta}$-1,4-glucanase gene, cel5L, was cloned using the shot-gun method from Bacillus sp.. The gene, which contained a predicted signal peptide, encoded a protein of 496 amino acid residues, and the molecular mass of the mature Cel5L was estimated to be 51.8 kDa. Cel5L contained a catalytic domain of glycoside hydrolase (GH) family 5 and a carbohydrate-binding module family 3 (CBM_3). Chromatography using HiTrap Q and CHT-II resulted in the isolation of two truncated forms corresponding to 50 (Cel5L-p50) and 35 kDa (Cel5L-p35, CBM_3-deleted form). Both enzymes were optimally active at pH 4.5 and $55^{\circ}C$, but had different half-lives of 4.0 and 22.8 min, respectively, at $70^{\circ}C$. The relative activities of Cel5L-p50 and Cel5L-p35 for barley ${\beta}$-glucan were 377.0 and 246.7%, respectively, compared to those for carboxymethyl-cellulose. The affinity and hydrolysis rate of pNPC by Cel5L-p35 were 1.7 and 3.3 times higher, respectively, than those by Cel5L-p50. Additions of each to a commercial enzyme set increased saccharification of pretreated rice straw powder by 17.5 and 21.0%, respectively. These results suggest CBM_3 is significantly contributing to thermostability, and to affinity and substrate specificity for small substrates, and that these two enzymes could be used as additives to enhance enzymatic saccharification.

• 한국생물공학회:학술대회논문집
• /
• 2003.04a
• /
• pp.439-444
• /
• 2003

The major factors related in enzymatic hydrolysis of food waste using cellulolytic enzymes of Trichoderma harzianum FJ1 were optimized by response surface analysis. The factors largely affecting to the reducing sugar concentration and enzymatic saccharification rate of food waste such as substrate concentration ($X_1$, %), enzyme concentration ($X_2$, U/ml), and reaction time ($X_3$, hr) were employed. A quadratic polynominal expressing the reducing sugar (RS) concentration relating with the above factors was as follows : RS (g/l) = -17.80 + $5.04X_1$ + $51.37X_2$ + $1.21X_3$ - $0.11X_1\;^2$ - $38.86X_2\;^2$ - $0.03X_3\;^2$ + $1.64X_1X_2$ + $0.04X_1X_3$ - $0.70X_2X_3$ ($R^2$=0.9939). The maximum value of the reducing sugar concentration and saccharification rate were obtained in the conditions of substrate concentration of 18.2%, enzyme concentration of 0.78 U/ml, and reaction time of 19 hr, respectively. The predicated reducing sugar concentration and saccharification rate by the response surface methodology were 95.13 g/l and 47.27%, respectively.

• Proceedings of the Korea Technical Association of the Pulp and Paper Industry Conference
• /
• 2011.04a
• /
• pp.101-110
• /
• 2011

The experiment was conducted to evaluate the different NaOH pretreatment concentrations (0.25%, 0.50%, 0.75%, and 1.00%) on enzymatic saccharification (with cellulase, and ${\beta}$-glucosidase) and fermentation (by Saccharomyces cerevisiaeKCCM 11304) for bioethanol production from rice straw and rice husk. Pretreatment of rice straw and rice husk were conducted under both natural and powder state to observe the potentiality of the biomass condition (natural and powder state). In this study, glucose and ethanol production were increased with the increase of NaOH percentage for both rice straw and rice husk (natural and powder state). For rice straw, the highest amount of glucose was obtained in 1.00% NaOH pretreatment (0.81 g $g^{-1}$ in a natural, and 0.63 g $g^{-1}$ in a powder state pretreatment). Similarly, for rice husk, the highest amount of glucose was obtained in 1.00% NaOH pretreatment (0.47 g $g^{-1}$ in a natural, and 0.46 g $g^{-1}$ in a powder state pretreatment). However, 0.75% NaOH pretreatment resulted in glucose yield near about 1.00% NaOH pretreatment for both rice straw and rice husk (natural and powder state). On the other hand, for rice straw, the highest amount of ethanol was obtained in 1.00% NaOH pretreatment (0.36 g $g^{-1}$ in a natural, and 0.31 g $g^{-1}$ in a powder state pretreatment). In addition, for rice husk, the highest amount of ethanol was also obtained in 1.00% NaOH pretreatment (0.24 g $g^{-1}$ in a natural, and 0.23 g $g^{-1}$ in a powder state pretreatment). Moreover, 0.75% NaOH pretreatment resulted in ethanol yield near about 1.00% NaOH pretreatment for both rice straw and rice husk (natural and powder state). It was confirmed that higher amount of NaOH use is cost effective. Moreover, higher amount of glucose and ethanol was observed when powder was prepared after pretreatment. So 0.75% NaOH pretreatment in a natural state is supposed to be suitable for enzymatic saccharification and fermentation for bioethanol production.

• KSBB Journal
• /
• v.22 no.2
• /
• pp.91-96
• /
• 2007

The saccharogenic liquid (SFW) obtained by the enzymatic saccharification of food wastes was used as a medium for production of bacterial cellulose (BC). The enzymatic saccharification of food wastes was carried out by the cultivation supernatant of Tricoderma inhamatum KSJ1 culture. Acetobacter xylinum KJ1 was employed for the BC production culture. Under the scaled-up aeration condition of 1.0 vvm, 5.64 g/L of BC was produced in 3 days cultivation in 50 L air circulation bioreactor using SFW medium with addition of 0.4% agar. The productivity was similar to that of 10 L air circulation bioreactor (5.84 g/L). This cultivation method with 50 L air circulation bioreactor decreasing shear stress and increasing oxygen transfer coefficient ($k_La$) was very useful in BC mass production. The physical properties, such as morphology, molecular weight, crystallinity, and tensile strength of BC produced by the static culture (A), the air circulation culture using 10 L bioreactor (B) and 50 L bioreactor (C) were investigated. The number average molecular weight of BCs produced under the different culture conditions (A-C) showed 2,578,000, 1,975,000, and 1,809,000, respectively. Tensile strength was 1.72 $kg/mm^2$, 1.19 $kg/mm^2$, and 1.18 $kg/mm^2$, respectively. All of the BCs had a form of cellulose I representing pure cellulose. The relative degree of crystallinity showed the range of 86.2$\sim$87.8%. BC production by the air circulation culture mode brought more favorable results in terms of the physical properties and its ease of scale-up. Therefore, it is expected that the new BC production method, the air circulation culture using SFW, would contribute greatly to BC-related manufacturing.

• Food Engineering Progress
• /
• v.15 no.2
• /
• pp.155-161
• /
• 2011

The aim of this study was to determine the effects of different extrusion conditions on the saccharification characteristics( initial reaction velocity, reaction rate constant, yield) of extruded corn starch. Extruded corn starch-water slurries were mixed with alpha-amylase for the enzymatic saccharification. The saccharification yield of extruded corn starch was high at lower feed moisture content and higher barrel temperature. The solubility of extrudates increased with increase in the SME input which increased with increase in the feed moisture content. Starch hydrolysates having DE 63.8 was obtained after 2 hr reaction. The initial reaction velocity of the extrudate slurry with alpha-amylase was higher with decrease in the feed moisture content. The initial reaction velocity of extruded corn starch was the highest ($2.26{\times}10^{-3}mmol/mL{\cdot}min$) at 25% feed moisture content and $120^{\circ}C$ barrel temperature, 250 rpm screw speed. The pregelatinized starch was $1.83{\times}10^{-3}mmol/mL{\cdot}min$ as a control. Reaction rate constant was a similar trend to initial reaction velocity.

• Journal of Korean Society of Forest Science
• /
• v.99 no.5
• /
• pp.744-749
• /
• 2010

Enzymatic hydrolysate from non pre-treated biomass of yellow poplar (Liriodendron tulipifera) was prepared and used as resource for bioethanol production. Fresh branch (1 year old) of yellow poplar biomass was found to be a good resource for achieving high saccharification yields and bioethanol production. Chemical composition of yellow poplar varied significantly depending upon age of tree. Cellulose content in fresh branch and log (12 years old) of yellow poplar was 44.7 and 46.7% respectively. Enzymatic hydrolysis of raw biomass was carried out with commercial enzymes. Fresh branch of yellow poplar hydrolyzed more easily than log of yellow poplar tree. After 72 h of enzyme treatment the glucose concentration from Fresh branch of yellow poplar was 1.46 g/L and for the same treatment period log of yellow poplar produced 1.23 g/L of glucose. Saccharomyces cerevisiae KCTC 7296 fermented the enzyme hydrolysate to ethanol, however ethanol production was similar (~1.4 g/L) from both fresh branch and log yellow poplar hydrolysates after 96 h.

• Korean Journal of Medicinal Crop Science
• /
• v.26 no.2
• /
• pp.127-133
• /
• 2018

Background: The demand of recycling renewable agricultural by-products is increasing. Radiation breeding is a method used to improve saccharification efficiency. Thus, we investigated the effect of gamma ray irradiation on the pretreatment and enzymatic hydrolysis of the stalks of Senna tora, an important medicinal plants. Methods and Results: S. tora seeds were irradiated with gamma ray at doses of 100, 200, 300, and 400 Gy. In the pretreated biomass, glucan and lignin content were higher in the M1 ($1^{st}$ generations of irradiation) S. tora stalks than in the M2 ($2^{nd}$ generations of irradiation) stalks, this can be explained by the higher degradation rate in M1. After oxalic acid pretreatment, the concentration of total phenolic compounds (TPCs) in the hydrolysate increased in the gamma ray treated seeds. The highest relative increase rate in crystallinity in the pretreated biomass was observed in M1-400 Gy and M2-100 Gy. The cellulose conversion rate was higher in M1 than in M2, except for 200 Gy. Conclusions: Gamma ray irradiation at an appropriate dose can be used to improve the efficiency of pretreatment and enzymatic hydrolysis, thereby increasing biomass availability.

• Journal of the Korean Wood Science and Technology
• /
• v.17 no.3
• /
• pp.52-60
• /
• 1989

This study was carried out to know the possibility of simultaneous utilization of laccase from white-rot fungus with cellulase on enzymatic hydrolysis of cellulosic substrate from autohydrolyzed oak wood. Laccases from 3 white-rot fungi, Pleurotus ostreatus. Ganoderma lucidum, and Phanerochaete chrysosporium, were isolated, purified and measured their activities. The highest activity was shown in Pleurotus ostreatus and the lowest in Phanerochaete chrysosporium. Laccase from Pleurotus ostreatus has optimum pH of 5.94, Km value of 3.209 mM and appeared to be stable at relatively wide pH range, 4.7-8.72. Temperature stability showed that 60% activity was preserved after 40 minutes at $50^{\circ}C$. Laccase from Ganoderma lucidum reached to the maximum activity during 15-20 day incubation. This enzyme has optimum pH of 6.45, Km value of 6.71 mM and pH range of 5.0-9.0 for stabilization. 95% activity was preserved at $30^{\circ}C$ and 58% activity at $50^{\circ}C$. Concerned to the enzymatic hydrolysis of cellulosic substrate with both enzymes, cellulase and laccase, simultaneously, mixed culture filtrates and mycellium extracts were shown higher hydrolysis rates than those of Trichoderma viride. There were no significant differences in the extent of hydrolysis among various mixed culture filtrates and mycellium extracts.