• 한국환경과학회지
• /
• 제25권11호
• /
• pp.1531-1540
• /
• 2016

This research was intended to provide a method to improve competitiveness, based on the integration of basic municipalities by assessing changes in their population and local industry Municipalities were integrated based on the addressing system 市(Shi), 町(Chome), 村(Village) of Japan. As a result, an actual increase of the population could not be seen in the new municipalities formed by the integration of the basic municipalities. It is also found that the shipping volumes, number of companies, and the number of people employed by local industry, attracted by such municipalities, has steadily decreased. However, even though the proportion of industry-sharing in the local municipalities is not significant, it was found that the number of tourists has increased. Therefore, it is concluded that the strengthening of the connectivity between local industry and the tourism industry can be one of the principal methods to strengthen the competitiveness of these municipalities. In addition, it has been found that scientific research from a variety of perspectives and verification of data related to the effectiveness of integration of local municipalities is necessary.

• 한국환경과학회지
• /
• 제26권3호
• /
• pp.335-343
• /
• 2017

Environmental Impact Assessment (EIA) is an important policy implemented before starting development projects to estimate and reduce environmental impact. However, the difficulty of quantification on several rating categories has hampered comprehensive analysis. Instead of it, the current EIA just summarizes outcome of investigation. Therefore, EIA fails to definitively ascertain whether the development shold be approved or not. This study aimed at providing the way to comprehensive decision-making by applying Emergy analysis and Emergy indicators to EIA. Production (P), Emergy Yield Ratio (EYR), Environmental Loading Ratio (ELR) and Emergy Sustainability Index (ESI) were selected for indicators. The indicators of range approving the development were set up with comparing before and after development or according to circumstances of which view of average that was classified as region or industry is appropriate to analysis. As a result, the value after development of P should be higher than the value before development. EYR and ESI of the value before development should be higher than region or industry average. On the contrary to these, ELR of the value after development should be lower than region or industry average. To verify applying Emergy indicators to EIA comprehensive analysis, Emergy evaluation was conducted to real case. As a result, applying Emergy analysis could suggest whether the development is appropriate or not. These indices and the result of this research are expected to be applied decision-making on environmental impact for sustainable development.

• 한국의류산업학회지
• /
• 제12권2호
• /
• pp.203-213
• /
• 2010

This study examined the wearing conditions of working clothes of shipbuilding industry workers according to the working environmental factors and working process features. It was also investigated the relationship between the wearing sense of working clothes and the overall comfort according to work processes. In the working process of shipbuilding industry, the process of fitting, welding, grinding and painting were chosen by considering work environmental factors, disaster types, hazardous materials, work process features, working clothes and safety equipments of each work categorized. The workers of fitting process usually wore the standard working clothes, while more than 60% of the workers of welding, grinding and painting wore the specialized protective clothes. The hazardous work environmental factors such as noise, heavy dust, high temperature and noxious fumes affected to the workers of fitting, welding and grinding. However, the workers of painting were greatly damaged by organic solvent. The dissatisfaction with the wearing performance of working clothes was highly shown in the sweat absorbency, moisture permeability and body protection. In respect of the correlation between the overall comfort and the wearing sense of working clothes, the satisfaction was decreased in orders of movement comfort> sensual comfort> physiological comfort.

• 환경영향평가
• /
• 제7권2호
• /
• pp.71-82
• /
• 1998

This study focuses on one of the most typical energy-intensive industries, the steel industry. The two-fold purpose of the study is to develop a model to assess measures to alleviate sulfur dioxide($SO_2$) emissions from the steel industry and to propose a concrete $SO_2$ emission reduction measure from the steel industry. This study partially employed and modified AIM(Asia-Pacific Integrated Model) developed by Japan National Environmental Research Institute to develop AIM/KOREA SULFUR model for simulation. In the study, a base scenario, which is BAU(Business As Usual) scenario, and mitigation scenarios(a use of low-sulfur contain fuel, fuel conversion to cleaner energy, an induction of desulfurization systems, and energy saving) were employed. The results of the simulation are summarized below: The sulphur dioxide emission from the steel industry in 1992 was estimated to be 252,000 metric tons; however, according to BAU scenario, sulphur dioxide emission is expected to be increased to 586,000 metric tons, which is 2.3 times greater than that in 1992 by year 2020. To alleviate such increasement, simulation results under various 7scenarios proved that some degrees of reduction may be possible by an induction of desulfurization systems although there may be numerous ways to interpretate the simulation results; however, the bottom line is that it appears to be difficult to achieve the Korean Ministry of Environment's policy goal-a mitigation of sulphur dioxide concentration to 0.01ppm.

• 한국물환경학회지
• /
• 제22권1호
• /
• pp.51-58
• /
• 2006

The effluent limitations for individual industry based on the best available technology economically achievable (BAT) have been required to achieve effective regulation. BAT assessment criteria that are suitable for the circumstances of Korean industry were developed in the previous study. The criteria were applied to determine the BAT for leather tanning and finishing industry. For the evaluation BAT, a subcategorization for the industry considering wastewater characteristics, source equipments, raw material and so on should be suggested. Three subcategories: A) Unharing, Chrome Tan, Retan-Wet Finish, B) Chrome Tan, Retan-Wet Finish, and C) Furskins were proposed in this study. Wastewater discharged from the each category contains high concentration of COD, chrome, nitrogen and sulfide. In particular, the concentration of nitrogen from the subcategory A is significantly greater. Twenty sites were surveyed and wastewater qualities were analyzed. Therefore, six different technologies were applied to the subcategory A for the end-of-pipe treatment technology, and a technology was used in the subcategory B and C, respectively. The technology candidates were evaluated in terms of environmental impacts, economically achievability, treatment performance and economical reasonability. As the result, the technology options for each subcategories: A) primary chemical precipitation + modified Ludzack-Ettinger process (MLE) + secondary chemical precipitation, B) chemical precipitation + typical activated-sludge process + Fenton oxidation, C) chemical precipitation + typical activated-sludge process + batch Fenton oxidation or batch activated carbon treatment were selected as the BAT, respectively.

• 대한환경공학회지
• /
• 제35권3호
• /
• pp.226-232
• /
• 2013

역삼투기반 금속산업폐수 물재이용시스템의 전처리공정을 선정하기 위해 연수화, 응집침전, 활성탄, 이온교환 및 중화 침전공정에 대한 무기물 및 유기물 제거특성을 조사하였다. 유기물제거를 위해 DOC중 친수성 및 소수성 유기물을 분류하였으며, 이를 이용하여 조합공정을 최적화하였다. 다양한 전처리공정 중에서 연수화는 금속산업 방류수에 존재하는 칼슘경도(1,201 mg/L as $CaCO_3$)를 93.4%제거함과 동시에 소수성유기물을 모두 제거하는 것으로 나타났다. 연수화 후에 응집침전공정을 연계할 경우, 방류수에 포함된 유기물 5.1 mg DOC/L을 1.6 mg DOC/L까지 저감할 수 있었다. 또한, 금속공정 원폐수를 대상으로 가성소다를 이용한 중화침전공정을 적용하였을 때, 수중경도를 유발하지 않으면서도 철과 총용존성고형물을 효과적으로 제거할 수 있는 것으로 나타났다.

• 무역상무연구
• /
• 제71권
• /
• pp.297-324
• /
• 2016

China not only has the largest amount of rare earth reserves, but it also produces the most rare earth products. However, China lacks appropriate supervision and management systems of its rare earth industry. The Chinese government's inappropriate mechanisms have been cause for reckless development by national rare earth providers characterized by excessive competition, environmental pollution, and smuggling. In response to the problems, China implemented regulatory measures to restructure the rare earth industry. The Chinese central government intensifies its efforts to control the total quantity of rare earth products and tackle environmental pollution. Six leading conglomerates have been selected to promote the Chinese central government's policy. A new environmental guideline has been drawn up to reduce the discharging of wastewater and air pollution substance. Huge transition and a great influence of its policy changes are expected. These policy changes are bound to entail huge transitions, and the policy is expected to have a great influence in the future structure of the rare earth industry. In consideration of these changes, the Korean government, in collaboration with private enterprises needs to take appropriate measures, such as overseas resources development, R&D expansion, tactical stockpiling, professional manpower training and so on.

• 유통과학연구
• /
• 제16권2호
• /
• pp.5-18
• /
• 2018

Purpose - In recent years, new retail innovations have emerged in the Japanese eyeglasses industry and grown as a retail format. The purpose of this study is to establish the process model of retail format creation by examining how a retailer creates a retail format and under what kind of environmental conditions. Research design, data, and methodology - This study pointed out the weakness of the concept of the retail format in existing research on the retail format in existing research on the retail format variation theory and suggested the concept of "Formula" to analyze an individual retailer. This study categorized the subjects categorize the subjects of retail format creation into four categories, and analyzed JINS which is the retail format leader in the Japanese eyeglass industry. This study used secondary data because it is valid. Results - This research found "product handling skill," "changes to consumer purchasing patterns," and "competitive interaction" as environmental factors influencing retail format creation. This study highlighted how JINS adapted those environmental factors to create their original formula and suggested the process model of retail format creation through the JINS case study. Conclusions - This study discussed two theoretical implications and three managerial impressions which were derived from the JINS case study. This study also discussed limitations and further research issues.

• Journal of Construction Engineering and Project Management
• /
• 제10권1호
• /
• pp.1-15
• /
• 2020

With the increased dependence on subcontracting in the construction industry, the operational relationship between main contractors and subcontractor plays an imperative role in successful project delivery. Consequently, improving this relationship increases the probability of project success and enhancing project performance. A wide range of research has confirmed that partnering improves the main contractor-subcontractor relationship. Though the positive impact of partnering on project performance is supported by a plethora of evidence, the guiding theory on practical partnering process steps is limited. The study aimed at improving subcontracting in the construction industry through a partnering process relevant to Zambia guided by factors obtained from industry expects. Questionnaire surveys and Semi-structured interview were adopted to investigate the perception of construction industry professionals and academics towards the main contractor-subcontractor relationship along with improvement factors. The findings showed that the relationship between main contractors and subcontractors on most projects in Zambia is unsatisfactory therefore justifying attention. Top factors that can enhance the main contractor-subcontractor relationship were identified. From the factors deduced and guidelines on partnering best practices, a project partnering model was developed.

• 국제학술발표논문집
• /
• The 9th International Conference on Construction Engineering and Project Management
• /
• pp.336-343
• /
• 2022

Industrial robotic arms are widely adopted in numerous industries for manufacturing automation under factory settings, which eliminates the limitations of manual labor and provides significant productivity and quality benefits. The U.S. modular construction industry, despite having similar controlled factory environments, still heavily relies on manual labor. Thus, this study investigates the U.S., Canada, and Europe-based leading modular construction companies and research labs implementing industrial robotic arms for manufacturing automation. The investigation mainly considered the current research scope, industry state, and constraints, as well as identifying the types and specifications of the robotic arms in use. First, the study investigated well-recognized modular building associations, the Modular Building Institute (MBI), and renowned architecture design magazine, Dezeen to gather industry updates. The authors discovered one university lab and a few companies that adopted Switzerland-based robotic arms, ABB. Researching ABB robotics led to the discovery of ABB's competitor, Germany-based KUKA robotic arms. Consequently, research extended to the companies and labs adopting KUKA models. In total, this study has identified seven modular companies and four research labs. All companies employed robotic arms and gantry robot combinations in a production-line-like system for partial automation, and some adopted design standardization for optimization. The common goal among the labs was to achieve greater flexibility and full automation with robotic arms. This study will help companies better implement robotic arm automation by providing recommendations from investigating its current industry status.