• Resources Recycling
• /
• v.20 no.1
• /
• pp.37-45
• /
• 2011

This study was conducted to recycle flotation tailings as non-sintered construction materials considering the economic and eco-friendly treatments. The particle size distribution( median $220\;{\mu}m$) of flotation tailings from Soon-shin mine was confirmed to be larger than that(median $140\;{\mu}m$) of tailings from Sam-kwang mine. Thus we investigated the properties of non-sintered eco-brick producted with the tailings from Sam-kwang mine and non-sintered water permeable block producted with the tailings from Soon-shin mine. Compressive strength of non-sintered water permeable block which was made with less than 25 wt% of tailings from Soon-shin mine was met with products class(over 14.70 MPa) of water permeable concrete(EL 245) from KEITL. Meanwhile, the coefficient of its permeability wasn't met with the products class( over $1.0{\times}10^{-2}\;cm/sec$). The properties of non-sintered eco-brick with less than 40 wt% of tailings from Sam-kwang mine were satisfied with third class in sintered clay brick products standard(KS L 4201). The non-sintered eco-brick as a result of leaching test on heavy metals by KSLT was verified to be environmentally stabile.

• Journal of Conservation Science
• /
• v.32 no.3
• /
• pp.377-384
• /
• 2016

There are physical and chemical method for removement of a lacquered layer existing on the surface when gilding an iron Buddha, these caused environmental pollution by surface degradation and is very noxious for conservation scientist's health. Thus, on this study, we conducted a lacquered layer removement experiments using Nd:YAG Laser which is contactless and eco-friendly. Specimens were made by polishing $5{\times}5$ size of iron(99.9%) specimens surfaces evenly and by differing of number of coating of unrefined lacquer, so there were thickness differences of $10{\mu}m$, $20{\mu}m$, and $30{\mu}m$. The laser machine used in this study was Nd:YAG Laser, and we used two wavelength modes; 1064 nm(160~180 mJ) for infrared light region and 532 nm(50~350 mJ) for ultraviolet light region. The experiment done by investigating the transition of specimens' surfaces with laser wavelength, energy, and numbers of investigation. The remain amount of lacquered layer surfaces before/after laser irradiation was investigated by stereoscopic microscope, observation by SEM, Non-contact Surface Roughness Measurement Device, and FT-IR etc. As a result of each analysis, we could verify the thickness of $10{\mu}m$, $20{\mu}m$ of lacquered layer removed without surface degradation when using 1064 nm wavelength with $1.0J/cm^2$ density. We could find out that Nd:YAG Laser is effective for removing remained lacquered layers when gilding an iron Buddha. In the future, when not only the metal has made various studies also wood lacquered furniture or the like, it seems to be utilized to remove the lacquer without surface damage.

• Journal of Applied Biological Chemistry
• /
• v.61 no.2
• /
• pp.151-155
• /
• 2018

In this study, cinnamon essential oil (CEO) was formulated as emulsifiable concentrate (EC) and a granule. For the evaluation of their negative effects on the ecosystem, acute toxicities against Cyprinus carpio was determined in a static condition. The formulations were made using CEOs extracted by 3 different methods (steam distillation (SD), solvent extraction and supercritical fluid extraction (SFE)) and were tested to obtain $LC_{50}$ values. Among the ECs, EC including CEO extracted by SFE showed highest acute toxicity against C. carpio. Among the granules, a granule including CEO extracted by SD showed highest acute toxicity against C. carpio. Nevertheless, $LC_{50}$ of EC and a granule formulation with CEOs was higher than toxicity level III of pesticide standardized by Korea rural development administration. These results were similar to those using zebrafishes. Chronic toxicities were not found for 45 days in zebrafishes until $500{\mu}gL^{-1}$ level of EC formulation including CEO obtained by the SD. Based on these results, EC formulation of CEOs may be considered to be used as environmental-friendly natural insecticides in accordance with the standards.

• The Korean Journal of Pesticide Science
• /
• v.20 no.4
• /
• pp.312-318
• /
• 2016

This study investigated the reduction of residual pesticide in soil by using eight kinds of soil amendments such as shell, quick lime, dolomite, silicic acid, leaf mold, oil cake, bed soil and husk. A total of ten pesticides most frequently detected in agricultural soil were selected (azoxystrobin etc.) and soil amendments were treated in soils at a 2% application rate and incubated for 7 days. Pesticides were analyzed by HPLC-MS/MS with QuEChERS-based sample preparation procedure and pH was measured on 1, 3 and 7 days. This study showed that, soil amemdments were effective in reducing pesticides after 7days of incubation. Over 90% of azoxystrobin, cadusafos, chlorpyrifos, fluquinconazole, imidacloprid, isoprothiolane and procymidone were decomposed from soils amended with 2% quick lime, whereas the concentration of boscalid, dimethomorph and triycyclazole were not decreased. The soil pH increased to 12.8-12.9 in soil amended with quick lime, but other soil conditioners did not change the soil pH. Quick lime was particularly effective in reducing residual pesticides.

• Asian Journal of Turfgrass Science
• /
• v.24 no.2
• /
• pp.176-181
• /
• 2010

Brown patch (Rhizoctonia solani AG1-1), dollar spot (Sclerotinia homoeocarpa), pythium blight (Pythium spp.), anthracnose (Colletotrichum graminicola), yellow patch (Rhizoctonia cerealis) and Zoysia patch (Rhizoctonia solani AG2-2) are the major turfgrasses diseases in Korea. In this study, 23 medicinal plant extracts were tested for antifungal activities against turfgrass pathogenic fungi. In paper disk diffusion method, 12 medicinal plant extracts, including Sophora flavescens, showed antifungal activity. Also, in the test of antifungal activity on media contained the extracts of S. flavescens, Curcuma longa, Rheum undulatum, Coptis chinensis and Asiasarum sieboldi showed above 80% inhibitory effects on the mycelial growth in 110 mg/10 ml concentration of the extracts. S. flavescens, in particularly, showed antifungal activity against the six turfgrass pathogenic fungi. The inhibition rate of S. homoeocarpa was 100% in 10 mg/10 ml, 5 mg/10 ml and 2 mg/10 ml concentrations of C. longa extract. In case of Pythium spp., the extracts of S. flavescens, R. undulatum and C. chinensis showed 100 % inhibition rate on the test media.

• The Korean Journal of Pesticide Science
• /
• v.20 no.1
• /
• pp.30-34
• /
• 2016

To evaluate the efficacy of natural nematicides for the control of root-knot nematode in strawberry greenhouses, commercial essential oils were examined by 24-well culture plate bioassay for their nematicidal activities against second-stage juveniles and eggs of Meloidogyne hapla. Based on the mortality of M. hapla juveniles at a concentration of $125{\mu}g/mL$, the most active essential oil was Alpinia galanga (100%), followed by Carum carbi (22.3%), Eugenia caryophyllata (9.4%), Cinnamonum zeylanicum (7.2%), Mentha pulegium (2.4%), and Foeniculum vulgare (2.1%). Moreover, A. galanga significantly reduced hatching at 7, 14, and 21 days after treatment. The volatile constituents identified in the A. galangal oil were methyl cinnamate (87.4%), 1,8-cineole (4.4%), ${\beta}$-pinene (2.5%), ${\alpha}$-pinene (2.2%), and p-cymene (1.1%), as major constituents. Results of this study show that A. galangal essential oil and its major constituents may serve as an environmental friendly agent of a promising natural nematicide to control Meloidogyne spp.

• The Korean Journal of Pesticide Science
• /
• v.18 no.2
• /
• pp.104-114
• /
• 2014

Scale insects heavily damaged many agricultural crops and trees in urban and forest areas. This study was conducted to carry out alternative control methods for environmentally friendly control of scale insects. Hot water extract of Quisquali indica produced high mortality against the black pine bast scale, Matsucoccus thunbergianae in previously experiment. Methanol extract obtained from fruit of Q. indica was successively fractionated using hexane, chloroform, ethyl acetate, buthanol and water which were examined by exposing for their insecticidal activity against four Cocoidea species (Eriococcus lagerstroemiae, Ceroplastes japonicus, Crisicoccus pini and Planococcus citri) in laboratory. Hexane fraction gave the highest insecticidal activity against scale insect pest. GC-mass analysis confirmed that the main compounds of Q. indica were alpha-pinene, methyl palmitate, eugenol, methyl myristate, phthalic acid mono(2-ethylhexyl)ester and palmitic acid. Among those compounds, ${\alpha}$-pinene was included 10 hexane subfractions. $LC_{50}$ of ${\alpha}$-pinene was 0.0114 ppm against 2nd instar of E. lagerstroemiae. These results suggest that Q. indica extracts might be used as an alternative control agent of scale insects.

• The Journal of the Korea Contents Association
• /
• v.17 no.11
• /
• pp.491-500
• /
• 2017

Recently, there are many children's hospitals which medical facilities are need to be improved in China. Except medical facilities, the environmental element-children's emotional security and mental development-were often been ignored. The waiting space is a place for the formation of the impression of hospital and the important space of spatial constitution for emotional security. It is necessary to provide a friendly environment for children. Previous studies showed there are three factors that affected healing environment in children's hospitals' waiting space: physical, psychological and conduct. The result showed that Chinese children's hospitals performed better in physical factor, but lack of psychological and conduct factor based on the case study of 6 children's hospitals in Beijing. In order meet the needs of patients and protectors better, the main purpose of this study is provide the suggestion for improving the healing environment from the perspective of design.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.19 no.5
• /
• pp.681-688
• /
• 2018

As environmental regulations have been strengthened and high fuel efficiency has been in demand in recent years, the number of ships using natural gas as a fuel is increasing. The demand for ships using LPG or methanol, which are emerging as eco-friendly vessel fuels, is also increasing. In this perspective, ME-LGI engines using LPG or methanol as a fuel have attracted considerable attention. Ships equipped with an ME-LGI engine are required to check the reliability of the fuel injection valve during shipping. This means that the development of a fuel injection valve tester is essential for the commercialization of ME-LGI engine. This study conducted the conceptual design of a fuel injection valve tester for ME-LGI engines using a system engineering process in the order of requirements analysis, functional analysis, and design synthesis. In the requirement analysis stage, the operating process of fuel injection valve was analyzed, and the necessity of checking the sealing oil leakage was then derived. In the functional analysis stage, the functions and flow of them were defined at each functional level. In the design synthesis stage, the equipment for each function was set and the process block diagram based on it was derived. In addition, preliminary risk analysis was performed as a part of system analysis and control, and safety measures were added to the conceptual design. This study is expected to be a good reference material for the concept design of other systems in the future because it shows the application process of a system engineering process to the conceptual design in detail.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.19 no.7
• /
• pp.275-282
• /
• 2018

Mountain trams are an environmental-friendly transportation system that run wirelessly on an embedded track constructed on previous mountain roads, and can run despite the frozen road. On the other hand, there is some difficulty on sharp and steep tracks. In this study, after possible technical problems were defined in mountain trams running on a sharp and steep track, the design solutions for the interface structure of bogie and carbody were proposed. In addition, a prototype was made and its performance was tested to verify the solutions. Because the difference in the distance of the inner and outer rails on a sharp curve is severe enough to interrupt running, independent rotating wheels with different angular speeds were developed and applied. To prevent derailment due to the large attack angle and lateral force caused by the previous vehicle of 2bogie-and-1carbody on the sharp curve, a vehicle with 1bogie-and-1carbody was designed and applied. A prototype vehicle of 1bogie-and-1carbody with independent rotating wheels was made to improve the performance during the test running on a small track. A coupler was designed to absorb the large rotations of 3 degrees-of-freedom between the carbodies of a mountain tram running on the steep curved track. After a small scale prototype was made, the performance was verified by a function test.