• Journal of Korean Society of Transportation
• /
• v.19 no.4
• /
• pp.35-47
• /
• 2001

Traffic represents one of the largest sources of primary air pollutants in urban area. As a consequence. numerous abatement strategies are being pursued to decrease the ambient concentration of pollutants. A characteristic of most of the these strategies is a requirement for accurate data on both the quantity and spatial distribution of emissions to air in the form of an atmospheric emission inventory database. In the case of traffic pollution, such an inventory must be compiled using activity statistics and emission factors for vehicle types. The majority of inventories are compiled using passive data from either surveys or transportation models and by their very nature tend to be out-of-date by the time they are compiled. The study of current trends are towards integrating urban traffic control systems and assessments of the environmental effects of motor vehicles. In this study, a methodology of motor vehicle emission calculation by using real-time traffic data was studied. A methodology for estimating emissions of CO at a test area in Seoul. Traffic data, which are required on a street-by-street basis, is obtained from induction loops of traffic control system. It was calculated speed-related mass of CO emission from traffic tail pipe of data from traffic system, and parameters are considered, volume, composition, average velocity, link length. And, the result was compared with that of a method of emission calculation by VKT(Vehicle Kilometer Travelled) of vehicles of category.

• Journal of the Korean Society of Groundwater Environment
• /
• v.4 no.1
• /
• pp.41-53
• /
• 1997

Geochemical data of soil and water samples were presented in order to assess the environmental impart for drinking water sites. Microscopic observation of rock samples and physical and chemical analysis of soil and water samples were undertaken. The geology of study areas are classified into three groups such as granitic rocks, meta-sedimentary rocks and sedimentary rocks. Enrichment of heavy metals derived from those rocks is not found in this study areas. Soils were analyzed for Cu, Pb, Zn, Cd and Cr using AAS extracted by HNO$_3$+HClO$_4$ and 0.1 N HCl. Heavy metal concentrations in soils are within the range of those in uncontaminated soils. In comparison of metal contents extracted by 0.1 N HCl and HNO$_3$+HC1O$_4$, less than 10% of the heavy metals are present in the exchangeable fraction. In particular, an pollution index has been proposed to assess the degree of soil contamination. Pollution index in soils are between 0.03 and 0.47 therefore, soils are not polluted with heavy metals. Deep groundwaters within granitic rocks have been evolved into Na$\^$＋/-HCO$_3$$\^$-/ type, whereas other deep groundwaters evolved into Ca$\^$2＋/-HCO$_3$$\^$-/ type. The predominance of Na$\^$＋/ over Ca$\^$2＋/ in deep groundwaters within granitic rocks is a result of dissolution of plagioclase, but for sedimentary and meta-sedimentary rocks, dissolution of calcite is a dominant factor for their hydrogeochemistry. The pH, conductivity and contents of the most dissolved ions in the water increase with depth. Shallow groundwaters, however, are highly susceptible to pollution owing to agricultural activities, considering the fact that high contents of nitrate, chloride and potassium, and high K/Na ratio are observed in some shallow groundwaters. In a thermodynamic approach, most natural water samples are plotted within the stability fields of kaolinite and smectite. Therefore, microcline and other feldspars will alter to form clay minerals, such as kaolinite and smectite. From the modelling for water-rock interactions based on mass balance equation, models accord well with behavior of the ions and results of thermodynamic studies are derived.

• Journal of Veterinary Clinics
• /
• v.10 no.2
• /
• pp.171-184
• /
• 1993

In Seoul area, there are so many kennel clubs, veterinary hospital, pet establishment and breeding confers that various problems have occurred. They are crowed pet houses, poor sanitation, stress to puppies, sudden environmental changes to puppies and unvaccination against parvovirus, canine distemper virus, parainfluenza virus, infectious hepatitis caused by Adenovirus type I and Leptospira. Several studies were made to survey the infectious agents involved in acute diarrhea of poppies in Seoul are, such as history taking, physical examination, complete blood count and serum chemistry, histopathological finding, bacterial isolation and identification, and hemagglutination test in feces and hemagglutination inhibition test in serum against parvovirus, respectively. The results obtained are summarized as followed. 1. The percent of PCV (30.5$\pm$5.6) and concentration of Total protein(5.0$\pm$0.8) resulted from statistical analysis are significantly lower than normal values (p<0.05), respectively. In addition, fibrinogen (505$\pm$326) was significantly higher an normal value (p<0.001), Band neutrophil (22.9$\pm$12.7) showed signifiant difference (P<0.01). decreased monocyte (3.2$\pm$2.1) and eosinophil (0.7$\pm$0.8) values appeared statistically significant (p<0.001), lymphocyte (16.7$\pm$9), as well. 2. The concentrations of calcium .(8.0$\pm$2.8), glucose (40.1$\pm$31.4), and albumin (2.0$\pm$0.39) were lower than normal values (p<0.01, p<0.01, p<0.001), respectively. Also Inorganic phosphate (7.1$\pm$2.4), pH (p<7.9f:0.2), and Blood Urea Nitrogen (40.41=37.1) were significantly higher than normal values (p<0.001, p(0.001, p<0.05), respectively. 3. Simple and mixed infections occupied 18% and 82% in the distribution of causes in puppies with acute diarrhea, respectively. 4. As puppies got older, incidence of acute diarrhea caused by Staphylococcus aureus was decreased to 13% and infection of canine distemper virus was increased to 53%, but E coli and canine parvovirus always showed high frequency of outbreak in the body weight ranged from 35g to 7.8Kg. 5. As showed in table 5, infections of E coli and Canine Parvovirus showed high outbreak regardless of the age which is classified into three stages, 35~50 day, 60 day and 75~day to 1 year, canine distemper virus appeared increased, but in case of Staphylococcus aureus, visa versa. 6. In comparison wi methods for the laboratory diagnosis diagnosis parvovirus, Hemagglutination test showed positive reaction in 25% and mean serum antibody titer measured by Hemagglutination inhibition test showed 2779 (n=20). In addition, positive reaction was 90% (18/20). 7. In histopathological studies, enteritic and pneumonic lesions were indicated in 53.7% and 39.5% of samples, respectively. 8. Etiologic diagnosis based on the history taking, clinical signs and histopathological findings in puppies with acute diarrhea and vomiting indicated that 50% of puppies were infected by canine parvovirus and distemper virus. 9. In the parasitological examination made by simple flotation with saturated zinc sulfate tour parasites found were Isospora canis, Toxocara canis, Ancylostoma spp and Toxocara spp. Isospora canis and Toxocara canis were more frequently found among those parasites of diarrhoeic causes in puppies ranged from 35 days to 1 year. Their infestation rates were 15% and 13% respectively.

• Journal of the Korean earth science society
• /
• v.37 no.7
• /
• pp.420-433
• /
• 2016

The purpose of this study is to improve the calibration matrixes of 2-D and 3-D convective rainfall rates (CRR) using the brightness temperature of the infrared $10.8{\mu}m$ channel (IR), the difference of brightness temperatures between infrared $10.8{\mu}m$ and vapor $6.7{\mu}m$ channels (IR-WV), and the normalized reflectance of the visible channel (VIS) from the COMS satellite and rainfall rate from the weather radar for the period of 75 rainy days from April 22, 2011 to October 22, 2011 in Korea. Especially, the rainfall rate data of the weather radar are used to validate the new 2-D and 3-DCRR calibration matrixes suitable for the Korean peninsula for the period of 24 rainy days in 2011. The 2D and 3D calibration matrixes provide the basic and maximum CRR values ($mm\;h^{-1}$) by multiplying the rain probability matrix, which is calculated by using the number of rainy and no-rainy pixels with associated 2-D (IR, IR-WV) and 3-D (IR, IR-WV, VIS) matrixes, by the mean and maximum rainfall rate matrixes, respectively, which is calculated by dividing the accumulated rainfall rate by the number of rainy pixels and by the product of the maximum rain rate for the calibration period by the number of rain occurrences. Finally, new 2-D and 3-D CRR calibration matrixes are obtained experimentally from the regression analysis of both basic and maximum rainfall rate matrixes. As a result, an area of rainfall rate more than 10 mm/h is magnified in the new ones as well as CRR is shown in lower class ranges in matrixes between IR brightness temperature and IR-WV brightness temperature difference than the existing ones. Accuracy and categorical statistics are computed for the data of CRR events occurred during the given period. The mean error (ME), mean absolute error (MAE), and root mean squire error (RMSE) in new 2-D and 3-D CRR calibrations led to smaller than in the existing ones, where false alarm ratio had decreased, probability of detection had increased a bit, and critical success index scores had improved. To take into account the strong rainfall rate in the weather events such as thunderstorms and typhoon, a moisture correction factor is corrected. This factor is defined as the product of the total precipitable waterby the relative humidity (PW RH), a mean value between surface and 500 hPa level, obtained from a numerical model or the COMS retrieval data. In this study, when the IR cloud top brightness temperature is lower than 210 K and the relative humidity is greater than 40%, the moisture correction factor is empirically scaled from 1.0 to 2.0 basing on PW RH values. Consequently, in applying to this factor in new 2D and 2D CRR calibrations, the ME, MAE, and RMSE are smaller than the new ones.

• The korean journal of orthodontics
• /
• v.38 no.3
• /
• pp.202-213
• /
• 2008

Objective: The purpose of this study was to compare the cephalometric measurements of obese and non-obese Korean male patients with obstructive sleep apnea syndrome (OSA). Methods: Eighty-seven adults who had visited the Sleep Disorder Clinic Center in Keimyung University, Daegu, Korea were examined and evaluated with polysomnography (PSG) and lateral cephalogram. They were divided into 4 groups (non-obese simple snorers, obese simple snorers, non-obese OSA patients, obese OSA patients) according to AHI (Apnea-Hypopnea Index) and BMI (Body Mass Index). Results: The obese OSA group had the highest AHI among the 4 groups. The non-obese OSA group had a significantly steeper mandibular angle and shorter tongue length than the obese OSA group. The hyoid bone of the obese OSA group was positioned anterior and inferior as compared with the non-obese OSA group. Multiple regression analysis showed that tongue length in the obese OSA group and retroposition of hyoid bone in the non-obese OSA group were significant determinants for the severity of AHI. Conclusions: From a cephalometric point of view, the obese and non-obese pateints with OSA may be characterized by different pathogeneses. Therefore, they have to be managed by individualized treatment. For the obese OSA patients, weight control must be advised as a first choice and for the non-obese OSA patients, oral appliance, nasal CPAP, UPPP and others could be chosen according to the obstructive sites.

• Journal of the Economic Geographical Society of Korea
• /
• v.14 no.3
• /
• pp.419-436
• /
• 2011

Korean farm villages are locked in vicious circle, as lots of their problems related to low income and hollow matters are geared and multiply. To get over those problems, various plans to develop Korean farm villages are being pushed ahead. In addition, since the early of 1990s, Korea has been projects to develop settlement zones and culture villages. It has been also preceeding with a comprehensive development project of farm villages and a new vitalizations project, etc. All of these projects aim to reorganize and expand life environments, industrial bases, and convenience and welfare facilities. The existing studies on a comprehensive project to develop farm villages have been focusing on evaluation indexes, problems, investment priorities, etc. But in fact, studies on a comprehensive development project of farm villages are not thoroughgoing enough in aspects of residents' attitude and their recognition on the influence on tourist development. Thus, this study aims to present strategic schemes to allow residents to actively participate in a stage of promoting a comprehensive development project of farm villages, a stage of making the plan, and a stage of the implementation. For this, this study analyzes a comprehensive development project of farm villages and attempts to figure out which influence the tourist development in farm villages has on residents' attitude and recognition resulting from changes in economic, social cultural, and environmental aspects. Especially, this study previously examines what influential factors there exists are and what influences the development of farm villages has on residents. Based on the results from the above analysis, schemes to enable residents to actively a comprehensive development project of farm villages are presented as follows. First, it is necessary to raise our recognition on tourism and tourism development of farm villages. If the main theme of a comprehensive development project of farm villages intends farm village development, it is required to educate residents and let them clearly raise their recognition on tourism, and the effect of the project is guaranteed. Second, it is highly required to make a plan so that we can feel economic effects of revenues through project promotion and positive effects including the expansion of infrastructures and welfare facilities, etc. Third, it is necessary to bring into relief the positive recognition and attitude of a comprehensive development project of farm villages. As for the negative recognition and attitude, it is very important to change negative residents' recognition to the positive direction and to allow them to participate in and to take an interest in the project, so that the project can be effectively promoted.

• Journal of Korean Society of Forest Science
• /
• v.54 no.1
• /
• pp.49-59
• /
• 1981

In order to elucidate the process of plant succession of the Japanese red pine forests caused by pine gall midge, Thecodoplosis japonensis, in the area of Chungbuk and Kyongbuk, 12 study plots, 4 plots from each three districts, were set up. Districts A (Cheongwon)not attacked by this insect, as the check, District B(Gumi) in which the insect outbreak occured 5 years ago, and District C(Yeongdong)in which the insect outbreak occured 10 years ago, were sampled. The surveyed were some environmental factors, the number of woody plants, relative density, relative dominance values, species composition of plots by layer(upper, middle and ground), importance values, species diversity, similarity and dissimilarity index, etc. The results obtained are summarized as follows: The accumulation of litter on the ground was increased with the lengthening the insect damage duration. Through the crown opening and litter accumulation, the light intensity, temperature condition and soil moisture and nutrient content might be altered. According to the changes of species composition were forced. In general, the Genus Quercus, as a compensation species, has sprung up. The relative importance values for Q.aliena, Q.serrata, and Q.variabilis were significantly increased in the insect infested forests. 2. the stand structure and species composition of the insect attacked forest about 5 years later after the outbreak become complex and diverse. However, since this time, the simplicity of these regards become restored up to 10 years after the outbreak. 3. As the synthetic analysis of plant succession process, the relative values calculated from the relative density and the relative dominance values shown the dominant status of Genus Quercus in the heavily damaged forests. In addition, Genus Rhododendron and Genus Lespedeza with higher frequency become the ground vegetation components. They were gradually increased along the time elapsing after the insect out-break. 4. The differences in connection with the soil moisture contents, the organic matter contents which might give some influences to the vegetation change were hardly recognizable statistically among the studied plots by three district groups. We estimated that the annual mean precipitation and the annual mean temperature did not operated any meaningful effects on the vegetation alteration among plots between districts.

• Journal of Korean Society of Forest Science
• /
• v.106 no.3
• /
• pp.275-287
• /
• 2017

The purpose of this study was to analyze forest vegetation type classification and relationships between the type and environment factor in Mt. Dutasan. Data were collected by total of forty six plots using Z-M phytosociological method from June to October, 2016, and analyzed by vegetation classification, canopy layer structure and relationships between vegetation unit and environment factor using coincidence methods. As a result of vegetation type classification, Quercus mongolica community group was classified at a top level of vegetation hierarchy that was classified into Rhododendron schlippenbachii community and Betula costata community. R. schlippenbachii community was divided into Lychnis cognata group and R. schlippenbachii typical group. L. cognata group was subdivided into Veratrum oxysepalum subgroup and L. cognata typical subgroup. B. costata community was divided into Fraxinus mandshurica group and Betula schmidtii group. F. mandshurica group was subdivided into Weigela subsessilis subgroup and Cimicifuga heracleifolia subgroup. Therefore the forest vegetation was composed of six vegetation units with two kinds of bisected species groups and fourteen species groups. As the result of an analysis of canopy layer structure, there were two kinds of structures with monotonous structures V. oxysepalum subgroup (vegetation units 1), L. cognata typical subgroup (vegetation units 2), W. subsessilis subgroup (vegetation units 4) and complicated structures R. schlippenbachii typical group (vegetation units 3), C. heracleifolia subgroup (vegetation units 5), Betula schmidtii group (vegetation units 6). The vertical layer structure of vegetation unit 5 was the most developed and vegetation unit 6 had the lowest coverage of herb layer. According to the correlation between vegetation unit and environmental factor, R. schlippenbachii community (vegetation units 1~3) and B. costata community (vegetation units 4~6) were classified based on 1,100 m of altitude, middle slope, twenty of slope degree, twenty percents of bare rock and thirty centimeters of DBH in tree layer. R. schlippenbachii community (vegetation units 1~3) showed positive correlation with altitude, topography and B. costata community (vegetation units 4~6) showed negative correlation tendency with them.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.4 no.1
• /
• pp.1-10
• /
• 1984

This dissertation presents an exact solution for the shearing and normal stresses of an orthotropic plane body loaded by a pairtial-uniform shear load. The solution satisfies the equilibrium and compatibility equations concurrently. An Airy stress function is introduced to solve the problem related to an orthotropic half-infinite plane under a partial-uniform shear load. All the equations for orthotropy must be degenerated into the expressions for isotropy when orthotropic constants are replaced by isotropic ones. The author has evaluated all the equations of orthotropy and succeeded in obtaining exactly identical expressions to the equations of isotropy which were derived independently by means of L'hospital's rule. The analytical results of, isotropy ate compared with the simple results of other investigator. Since a concentrated shear load is a particular case of partial-uniform shear load, all the equations of partial-uniform shear load case are degenerated into the expressions for concentrated load case of isotropy and orthotropy. The formal solution is expressed in terms of closed form. The numerical results for orthotropy are evaluated for two kinds and two different orientations of the grain of wood. The type of wood considered are three-layered plywood and laminated delta wood. The distribution of normal and shearing stresses are shown in figures. It is noted that the distribution of stresses of orthctropic materials dependson the type of materials and orientations of the grain.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.33 no.5
• /
• pp.2049-2056
• /
• 2013

With the advance in information communication, the information age has come, and desire of human being in increasing. In this circumstance, the necessity for design for building of superhighways is arising to improve the mobility in the field of transportation, too. This study was conducted to analyze if driver can drive at a design speed on a superhighway with a design speed exceeding 120km/h. For this study, it was experimented if the running speed that makes a driver feel anxious, increased, when road alignment and standard improved, due to the differences of design speed. For the experiment, 30 subjects were asked to attach brain wave analyzers to bodies. Then, this study compared powers of ${\beta}$ waves generated, when they felt anxious, driving on the roads with different design speeds, and driving virtually through a simulator. Here, Kangbyeonbukro (90km/h), Jayuro(100km/h), Joongang Expressway(110km/h), and Seohaean Expressway(120km/h) were selected as experimental sections. While drivers drove on the Kangbyeonbukro and Jayuro at a speed of 80km/h - 130km/h, on the Joongang Expressway at a speed of 100km/h - 150km/h, and Seohaean Expressway at a speed of 110km/h - 180km/h, powers of anxiety EEGs(electroencephalogram) were compared, and during the simulation driving at the same speed of 110km/h - 180km/h, powers of anxiety EEGs were compared and analyzed. Moreover, the speed when anxiety EEGs increased, was statistically verified through paired t-test. As the result, the speed when anxiety EEGs increased during the simulation driving was nearly 30km/h higher than when they increased during the actual driving on the expressways, and anxiety EEGs increased at the same speed, when subjects drove on the roads with a design speed of 90km/h and 100km/h. It means that there were small differences in road alignment and standard. However, the running speed to make drivers feel anxious was increased at both roads with a design speed of 110km/h and 120km/h. It implies that drivers can drive at a higher speed, as road alignment and standard improve.