• Journal of Korean Society for Atmospheric Environment
• /
• v.23 no.E2
• /
• pp.39-46
• /
• 2007

In order to present the scientific information of organic emissions from consumer products available, the current study examined the emissions composition for three different types of consumer products being used in Korea in an environmental chamber: air freshener (AF), mosquito repellents (MSQR), and moth repellents (MTHR). Emission rates were evaluated by determining emission rates of the target compound from the selected products using an electropolished stainless steel (SS) test chamber $(40{\times}25{\times}50cm^3)$. A time-dependent empirical relationship developed in this study agreed well with the test results. As same with the emission concentrations, MSQR exhibited the highest emission rate for all target compounds except for limonene and naphthalene. MTHR ($9,200\;{\mu}g\;h^{-1}$) showed the highest emission rate of naphthalene followed by MSQR ($8,300\;{\mu}g\;h^{-1}$). Moreover, the concentrations in residential bedroom conditions for target compounds emitted from three types of consumer products were estimated. This estimation suggests that the uses of consumer products can elevate indoor levels of target compounds. In particular, any types of the consumer products may increase the indoor level of m, p-xylene.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.17 no.4
• /
• pp.10-15
• /
• 2009

Emission regulations on greenhouse gas(GHG) in automobiles have been stringent because of global warming effect. Over 90% of total GHG emission are carbon dioxides and about 20% of this $CO_2$ emission are emitted from automobiles. In this study, 110 vehicles were tested on a chassis dynamometer and $CO_2$ emissions and fuel economy were measured in order to investigate the characteristics of $CO_2$ emission factor from passenger vehicles which are the most dominant vehicle type in Korea. The characteristics of emissions in accordance with displacements, gross vehicle weight, NIER and CVS-75 speed mode were discussed. It was found that vehicles having larger displacement, heavier gross vehicle weight, automatic transmission and specially at cold start emitted more $CO_2$ emissions. From these results, correlation between $CO_2$ emission and fuel economy was also obtained. This study may contribute to evaluate domestic greenhouse gas emissions and establish national policies on climate changes in future.

• Journal of Environmental Science International
• /
• v.23 no.12
• /
• pp.2057-2069
• /
• 2014

This study was carried out to estimate the BVOCs emissions with the emission factors which reflected the native conditions of forests in Jeju Island. This study made effective use of the previous data for the weather data and the emission rate of each organic volatile component measured at 10 species of conifers and broad leaved trees. The CORINAIR method and the grid system of $1km{\times}1km$ for whole area of Jeju Island were adopted in calculating the BVOCs emission emitted from forest. The vegetation information for Jeju Island was referred to GIS and a government report. By the results of BVOCs emission for Jeju Island, the 85% of monoterpene emission was emitted from conifers and the others was from broad leaved trees. Most of monoterpene emission was attributed to Pinus thunbergii and Cryptomeria japonica. The broad leaved trees greatly contributed to the isoprene emission and Quercus serrata played a dominant role in emission of isoprene. The total amount of BVOCs emission was estimated as $3612ton\;yr^{-1}$ in Jeju Island. The 51.1% of total emission was contributed to conifers, the 44.9% to broad leaved trees, and the 4.0% to grassland. Of total emission of BVOCs, monoterpene accounted for 32.3%, isoprene for 28.0%, and OVOCs for 39.7%. The BVOCs emission estimated by this study was less than that estimated by other previous study. This means that it is important to survey the emission rate at native conditions and gather the detailed information for various species of vegetation on target region.

• Journal of Korean Society for Atmospheric Environment
• /
• v.30 no.1
• /
• pp.37-47
• /
• 2014

In this study, field measurement was carried out for reasonable improvement of asphalt concrete manufacturing facilities' PM emissions estimation method. Through those, this study calculated PM emission factor and tried to estimate PM emissions from asphalt concrete manufacturing facilities suitable for domestic characteristics. As a result, the efficiency of the PM control device was measured as 99.9%. Using this, uncontrolled PM emission factor was calculated. PM emission factor was calculated 10.97 kg/ton at 23 asphalt concrete manufacturing facilities of 22 workplaces. The PM current emission factor of the US Environment Protection Agency (EPA) is 14.4 kg/ton, the factor calculated from this study is about 24% lower than the EPA standard.

• Journal of environmental and Sanitary engineering
• /
• v.23 no.3
• /
• pp.39-46
• /
• 2008

In order to study the estimate of $CH_4$ emission factors in the municipal wastewater treatment plants, the active sludge process, 5-stage process, Denipho process, and SBR process were investigated. When active sludge process, 5-stage process, and Denipho process were used in wastewater treatment plant, the $CH_4$ emission factors were 2.88, 1.61, and 0.57 g-$CH_4/kg$-BOD, respectively. On the other hand, in the case of SBR process, it was 4.14 g-$CH_4/kg$-BOD. These results indicate that SBR process was effective for $CH_4$ emission in municipal wastewater treatment plants. Using the above processes, the methane emission factor and amount of waste water sludge were $4.78m^3/t$ and $12,204,506m^3/yr$, respectively. The remove of BOD was a range of $93.91{\sim}98.63%$.

• Environmental Engineering Research
• /
• v.24 no.1
• /
• pp.107-116
• /
• 2019

Nitrogen removal, nitrous oxide ($N_2O$) emission and microbial community in sequencing batch and continuous-flow intermittent aeration processes were investigated. Two sequencing batch reactors (SBRs) and two continuous-flow multiple anoxic and aerobic reactors (CMRs) were operated under high dissolved oxygen (DO) (SBR-H and CMR-H) and low DO (SBR-L and CMR-L) concentrations, respectively. Nitrogen removal was enhanced under CMR and low DO conditions (CMR-L). The highest total inorganic nitrogen removal efficiency of 91.5% was achieved. Higher nitrifying and denitrifying activities in SBRs were observed. CMRs possessed higher $N_2O$ emission factors during nitrification in the presence of organics, with the highest $N_2O$ emission factor of 60.7% in CMR-L. SBR and low DO conditions promoted $N_2O$ emission during denitrification. CMR systems had higher microbial diversity. Candidatus Accumulibacter, Nitrosomonadaceae and putative denitrifiers ($N_2O$ reducers and producers) were responsible for $N_2O$ emission.

• Journal of Environmental Impact Assessment
• /
• v.8 no.4
• /
• pp.59-72
• /
• 1999

The purpose of the study is to propose the concrete and realistic alternative measures for $CO_2$ emission reduction on commercial sector. To achieve the purpose, this study adopted AIM/KOREA simulation model modified from AIM(Asia-Pacific Integrated Model) originally developed by Japan National Environmental Research Institute. The results of simulation demonstrate that the $CO_2$ emission from the commercial sector in 1995 was estimated 864 million TC(tons of carbon); however, according to the base scenario, $CO_2$ emission in 2020 is expected to be increased to 1,872 million TC, which is 2.17 times greater than that in 1995. In order to mitigate the ever-increasing $CO_2$ emission, the results of AIM/KOREA simulations under various scenarios showed that the 30-thousand-won carbon tax scenario does not successfully motivate the selection of advanced technology; however, with the 300-thousand-won carbon tax, a substantial amount of $CO_2$ emission reduction by 1.69 million TC from the BaU((Business-as-Usual)scenario is expected to be achieved by year 2020. Such substantial reduction of $CO_2$ emission under the 300-thoudsand-won carbon tax scenario is due to the introduction of advanced technology, such as use of condensing boilers, forced by heavier carbon tax. Under the scenario that presumes the maximum introduction of gas-burning industrial appliances, an 2.66 million TC of $CO_2$ reduction was expected. The results of this study suggest that the $CO_2$ emission reduction measures can be interpreted in many different views. However, if people and industries are fully aware of the economic benefit of energy saving, a certain level of $CO_2$ reduction by a successful introduction of advanced energy saving technology appears to be achieved without carbon tax or subsidies.

• Journal of Korean Society for Atmospheric Environment
• /
• v.24 no.2
• /
• pp.189-195
• /
• 2008

We developed emission factors for alternative fuels used in cement industries in Korea and also estimated reduction in emissions of greenhouse gas (GHG) by the use of alternative fuels. Emission factors for GHG of waste tire, waste plastic, waste oil and RDF were estimated to be about 89, 78, 77 and 95 ton $CO_2$/TJ respectively. When compared with previous studies, most of the results showed similar trends. The calorific value estimation and elemental analysis for energy source were implemented in order to estimate the exact emission factors and the reduction of GHG emissions using alternative fuel. In the case of 'A' company, $CO_2$ emission from alternative fuels was about 4% lower than that of bituminous coal only. Also in case of company 'B', $CO_2$ emission from alternative fuels was about 1.4% lower than that of only bituminous coal. In Germany and Japan, alternative fuel is not regarded to be fuel consumption in cement industry. When applying this rule, the emission reductions were about 4.3% for company 'A' and 6.3% for company 'B'. The results of this study may be considered as a useful information for developing strategies in reducing GHG emissions.

• Journal of Korean Society for Atmospheric Environment
• /
• v.33 no.4
• /
• pp.351-360
• /
• 2017

In this study, we developed emission factors from solid-fuel fired combustors. In order to increase the reliability of emission factors, we conducted a joint research with the Institute of Health and Environment. As a result, PM average concentration was $8.19mg/m^3$. $SO_2$ and $NO_x$ were respectively 8.46 ppm, 50.64 ppm. Hazardous air pollutants such as Cr, Pb and Hg were detected in trace amounts continuously for 2 years in some solid-fuel fired combustors. The emission factors for the three kinds of PM, $SO_x$, $NO_x$ were developed based on the measurement data. For the PM emission factors, that of SRF was 15.93 g/kg and that of Bio-SRF was 14.18 g/kg. Compared with those of US. EPA, emission factors of this study showed the results of low values. $SO_x$ emission factors were 4.42 g/kg for SRF and 1.39 g/kg for Bio-SRF. $NO_x$ emission factors were 13.21 g/kg and 4.43 g/kg, respectively. Through the results of this study, we would support atmospheric administration policies such as the emission factor notification revision.

• Transactions of the Korean hydrogen and new energy society
• /
• v.23 no.6
• /
• pp.634-639
• /
• 2012

The contribution levels of emissions from the heavy-duty vehicles have been continuously increased. Among the exhaust emissions, NOx (nitric oxides) have a ratio of 73.2% and particle matters have a proportion of 61.8% in the heavy-duty vehicles. Also, natural gas vehicles have the 78.9% of total registered local buses in Korea. Therefore, the investigation on emission characteristics of heavy-duty vehicles using CNG and diesel fuel according to the various driving cycles was carried out in this study. In order to analyze the emission characteristics, the five kinds of buses by using CNG and diesel fuels with a after-treatment devices (DPF, p-DPF) was used and five test driving schedules were applied for analysis of emission characteristics in a chassis dynamometer. To analyze the exhaust emission, the exhaust emission and PM analyzers were used. From this study, it is revealed that diesel buses with after-treatment had reduced emission of CO, HC, PM but NOx. Also, NMHC emission of CNG bus have a higher level and NOx level was similar with diesel buses. In addition, emissions in NIER06 with slow average speed shows lowest levels compared to other test modes.