• Economic and Environmental Geology
• /
• v.42 no.2
• /
• pp.95-105
• /
• 2009

Systematic studies are performed for arsenic adsorption on synthesized lepidocrocite. The synthesized lepidocrocite with high surface area of $94.8\;g/m^2$ has shown that the point of zero charge(PZC) is 6.57 determined by potentiometric titration, suggestive of high capacity of arsenic removal. Results show that arsenite[As(III)] uptake by synthesized lepidocrocite is greater than that of arsenate[As(V)] at pH $2{\sim}12$, indicating that the lepidocrocite has high affinity toward arsenite rather than arsenate. Adsorption of arsenate decreases with increasing pH from 2 to 12, whereas arsenite sorption increases until pH 8.0, and then decreases dramatically with increasing pH, suggesting that changes in surface charge of the lepidocrocite as a function of pH playa important role in aresinc uptake by the lepidocrocite. Upon kinetic experiments, our results demonstrate that both arsenite and arsenate sorption on the lepidocrocite increases rapidly for the first 4 h followed by little changes during the duration of the experiment, showing that adsorption plays a key role in aresenic uptake by the lepidocrocite. Our results also show that power function and elovich models are the best fit for the adsorption kinetics of arsenite and aesenate on the lepidocrocite.

• Journal of the Korea Society of Computer and Information
• /
• v.15 no.8
• /
• pp.157-161
• /
• 2010

Most of air pollution in a metropolis is the result of exhaust gas emissions from automotive vehicles, and the world-wide regulation against environmental pollution is becoming more strict. Moreover the demand on development and supply of an environment-friendly automobile is increasing and the market share about that is expected to grow rapidly in this time of high oil price. The secondary batteries the most important component to store the electrical energy in hybrid electric vehicle. It needs to the higher power characteristics to emit the energy instantaneous. In this paper, we proposed the system to monitor reliably the charge and discharge states of the secondary batteries for hybrid electric vehicle. The material is about SW and HW module the software and hardware module mounted on the charge and discharge system and the monitoring system to control the charge and discharge performance effectively.

• Journal of Environmental Science International
• /
• v.7 no.3
• /
• pp.269-274
• /
• 1998

In order to develop of support medla for bloom reactor, physicochemical properties and attachability of surface of activated carbon, clay mineral, non-clay mineral, and waste mold sand were enamined. Measured physicochemical properties of materials were surface roughness, mean particle size, surface area, hydrophobicity, and surface charge. At a tested materials, activated carbon was the best attachable material and microorganisms were attached $20.1{\times}10^7CFU/cm^2$ at surface, compared with diatomaceous earth which were attached of $9.2{\times}10^7CFU/cm^2$ in our research, surface area and hydrophobicity show- ed more Influence than any other factor on attachment of microorganisms.

• Journal of People, Plants, and Environment
• /
• v.22 no.3
• /
• pp.241-253
• /
• 2019

This study presents the standards for desirable local transfer of public affairs by analyzing the perceptions of experts in the academia and research institutes, as well as public officials in the environmental sector in charge of environmental affairs. The results of this study tend to be partially consistent with the results of previous studies that there is a difference in perception among respondents depending on the affiliation of experts and public officials. Among the policy tasks, there was a statistically significant difference among the respondents in perception of responsible agent for carrying out sustainable land planning and management. Regarding general environmental affairs, there was a statistically significant difference among pubic officials in different affiliations in perception of responsible executive agent for natural environment, living environment, and resource circulation.

• Bulletin of the Korean Space Science Society
• /
• 2003.05b
• /
• pp.49-49
• /
• 2003

No Abstract, See Full Text

• Korean Journal of Materials Research
• /
• v.30 no.11
• /
• pp.601-608
• /
• 2020

In this work, Ag₃PO₄/In₂S₃ nanocomposites with low loading of In₂S₃ (5-15 wt %) are fabricated by two step chemical precipitation approach. The microstructure, composition and improved photoelectrochemical properties of the as-prepared composites are studied by X-ray diffraction pattern (XRD), field emission scanning electron microscopy (SEM), transmission electron microscopy (TEM), X-ray photoelectron spectroscopy (XPS), photocurrent density, EIS and amperometric i-t curve analysis. It is found that most of In₂S₃ nanoparticles are deposited on the surfaces of Ag₃PO₄. The as-prepared Ag₃PO₄/In₂S₃ composite (10 wt%) is selected and investigated by SEM and TEM, which exhibits special morphology consisting of lager size substrate (Ag₃PO₄), particles and some nanosheets (In₂S₃). The introduction of In₂S₃ is effective at improving the charge separation and transfer efficiency of Ag₃PO₄/In₂S₃, resulting in an enhancement of photoelectric behavior. The origin of the enhanced photoelectrochemical activity of the In₂S₃-modified Ag₃PO₄ may be due to the improved charge separation, photocurrent stability and oriented electrons transport pathways in environment and energy applications.

• Journal of the Korean Regional Science Association
• /
• v.37 no.1
• /
• pp.45-61
• /
• 2021

This research purposes to design a methodological framework to suggest the optimal method to resolve the conflicts of stakeholders surrounding the water use charge of the Han River region, and to use the analysis results to provide the direction of policy. For this, it was preceded that the process of understanding the mechanisms of the multifaceted conflict between decision makers taking different positions over water use charge of the Han River region, and an optimal method to resolve the conflict of water use charge of the Han River region was derived by using a graph model for conflict resolution(GMCR). According to the analysis results, the optimal state to find a solution to the water use charge of the Han River is that the Seoul-Incheon-Gyeonggi region pays the charge according to the original rate while Seoul-Incheon requesting discount the water use rate. In addition, the Han River management committee should establish policies desired by Seoul-Incheon-Gyeonggi region including rationalization of the decision-making structure to determine the rate of water use charge, making the basis to support the Han River management fund system for the Seoul-Incheon region, and transparent management of the Han River management fund system considering the characteristics of beneficiary regions and residents. This study is expected to provide objective decision-making information in establishing environmental policy directions related to conflict resolution in the water use charge of the Han River region and to offer a methodological basis for similar follow-up studies related to conflicts derived from sharing nature environment.

• Korean Journal of Environmental Agriculture
• /
• v.30 no.3
• /
• pp.261-267
• /
• 2011

ACKGROUND: Cadmium (Cd) has long been recognized as one of most toxic elements. Application of organic amendments and phosphate fertilizers can decrease the bioavailability of heavy metals in contaminated soil. METHODS AND RESULTS: This study was conducted to evaluate effect of combined application of phosphate fertilizer and manure in reducing cadmium phytoavailability in heavy metal contaminated soil. Phosphate fertilizers [Fused and super phosphate (FSP) and $K_2HPO_4$ (DPP)] and manure (M) were applied as single application (FSP, DPP, and M) to combined application (FSP+M and DPP+M) before radish seeding. $K_2HPO_4$ decreased $NH_4OAc$ extractable Cd and plant Cd concentration, mainly due to increases in soil pH and negative charge. However, FSP increased $NH_4OAc$ extractable Cd and plant Cd concentration. Manure significantly increased soil pH and negative charge. Combined application of phosphate fertilizer and manure were much more effective in reducing Cd phytoavailability than a simple application of each component. Calculated solubility diagram indicated that Cd concentrations in the solution of soils amended with phosphate fertilizers and manure were undersaturated with respect to all potential Cd minerals [$Cd_3(PO_4)_2$, $CdCO_3$, $Cd(OH)_2$, and $CdHPO_4$]. Plant Cd concentration and $NH_4OAc$ extractable Cd were negatively related to soil pH and negative charge. CONCLUSION: Alleviation of Cd phytoavailability with phosphate fertilizer and manure can be attributed primarily to Cd immobilization due to the increase in soil pH and negative charge rather than Cd and phosphate precipitation. Therefore, combined application of alkaline phosphate materials and manure is effective for reducing Cd phytoavailability.

• Korean Institute of Interior Design Journal
• /
• v.13 no.6
• /
• pp.150-157
• /
• 2004

The Furniture Industry is, which is taking Charge of the large Portion of environmental Pollution as a nun Consumer of Resources, therefore, in a Furniture Design, active Argument of the Researches and the related Constituents to the Design and Material is very absolutely required recently The Furniture Design which Ecology was applied to can minimize the environmental Burden through the Resources and Energy Consumption Reduction and cyclic Utilization within the Earth Ecosystem, and proceed to the Presentation of the Possibility to solve the recent environmental Problems. This Study was written as part of the first Step in the Development of independent Eco-Label System and environmental Criteria for Furniture and national Furniture Industries. It contains the Definition of Furniture, ecological Design and ecological Furniture (Chapter2). and Chapter 3 Presents Characteristics of ecolo91cal Furniture. Chapter 4 Provides a Summary of the specific Criteria on a Materials used for Furniture Design with the relevant environmental Issues in the Life Cycle of Furniture, and also health 8t safety related Issues and performance Issues.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.19 no.1
• /
• pp.1-8
• /
• 2011

In recent years, there has been an interest in early-injection diesel engines as it has the potential of achieving a more homogeneous and leaner mixture close to TDC compared to standard diesel engine. The more homogeneous mixture may result in reduced NOx and soot emissions and higher efficiency in homogeneous charge compression ignition engines. While earlier studies have shown that a reduction in NOx emissions from HCCI engine is possible, there are some significant problems including the control of ignition timing and combustion rate. In order to investigate the effect of EGR and hydrogen enriched gas on combustion characteristics and emissions, an experiments with single cylinder CRDi engine were carried out concerning the formation of various premixed charge, which can achieved by early injection, EGR and hydrogen enriched gas. EGR was not effective to further reduce NOx and PM emissions. It was found that NOx emissions were decreased with an introduction of hydrogen enriched gas and an adequate diesel fuel amount.