• Journal of Environmental Impact Assessment
• /
• v.28 no.5
• /
• pp.483-491
• /
• 2019

In orderto cope with the post-2020 in accordance with the Paris Agreement, greenhouse gas (GHG)reduction in Environmental Impact Assessment (EIA) and its contributions to post-2020 were discussed. The 26 Environmental Impact Statement (EIS) administered by Geum-River Basin Environmental Office from 2010 to 2019 were analyzed for reviewing GHG mitigation measures. From the case study, it was found that the assessment of GHG emissions reduction and climate change adaptation were not appropriately performed. In this study, the following measures are proposed to improve the inappropriate assessment of 'GHG subject matter' associated with EIA according to post-2020, 1) allotment of enforced charge on GHG emission during the EIA process, 2) addition of the 'GHG subject matter' in 'establishing permissible discharge standards' which is based on "Act on the Integrated Control of Pollutant-discharging Facilities", and 3) the participation of stakeholders in early EIA stage for governance. Also the details on the EIA for the preparedness of post-2020 were discussed here.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2016.02a
• /
• pp.417-417
• /
• 2016

Global environmental deterioration has become more serious year by year and thus scientific interests in the renewable energy as environmental technology and replacement of fossil fuels have grown exponentially. Photoelectrochemical (PEC) cell consisting of semiconductor photoelectrodes that can harvest light and use this energy directly to split water, also known as photoelectrolysis or solar water splitting, is a promising renewable energy technology to produce hydrogen for uses in the future hydrogen economy. A major advantage of PEC systems is that they involve relatively simple processes steps as compared to many other H2 production systems. Until now, a number of materials including TiO2, WO3, Fe2O3, and BiVO4 were exploited as the photoelectrode. However, the PEC performance of these single absorber materials is limited due to their large charge recombinations in bulk, interface and surface, leading low charge separation/transport efficiencies. Recently, coupling of two materials, e.g., BiVO4/WO3, Fe2O3/WO3 and CuWO4/WO3, to form a type II heterojunction has been demonstrated to be a viable means to improve the PEC performance by enhancing the charge separation and transport efficiencies. In this study, we have prepared a triple-layer heterojunction BiVO4/WO3/SnO2 photoelectrode that shows a comparable PEC performance with previously reported best-performing nanostructured BiVO4/WO3 heterojunction photoelectrode via a facile solution method. Interestingly, we found that the incorporation of SnO2 nanoparticles layer in between WO3 and FTO largely promotes electron transport and thus minimizes interfacial recombination. The impact of the SnO2 interfacial layer was investigated in detail by TEM, hall measurement and electrochemical impedance spectroscopy (EIS) techniques. In addition, our planar-structured triple-layer photoelectrode shows a relatively high transmittance due to its low thickness (~300 nm), which benefits to couple with a solar cell to form a tandem PEC device. The overall PEC performance, especially the photocurrent onset potential (Vonset), were further improved by a reactive-ion etching (RIE) surface etching and electrocatalyst (CoOx) deposition.

• Journal of the Korean Chemical Society
• /
• v.36 no.4
• /
• pp.477-484
• /
• 1992

Using semiempirical molecular orbital method, ASED-MO of extended Huckel Theory, we were investigated chemical bonds and electronic properties of Cu atom in a chain and a layer for Y123 and Y124 superconductors from VEP (valence electron population), DOS (density of state), and COOP (crystal orbital overlap population). In order to investigate environmental effects of Cu atom for Y123 and Y124 superconductors, we introduced charged cluster models with point charge and without point charge into our calculations. As a result of ASED-MO calculations, the Cu atom in the layer acts as electron acceptor and the Cu atom in the chain acts as electron donor for Y123 and Y124 superconductors. The oxidation state of Cu atom for Y123 and Y124 superconductors without point charge is higher in the chain than in the layer. The oxidation state of Cu atom in the layer for Y123 superconductor is higher than that in the layer for Y124 superconductor. The Cu atom in the layer and the chain for Y123 superconductor does not largely affect on the environmental effect. However, the Cu atom in the layer and the chain for Y124 superconductor does largely affect on it. Also, electron population and chemical bonding of Cu1-O4, Cu2-O4, and Cu1-Cu2 for Y123 superconductor are far different from Y124 superconductor.

• Journal of the Korean Society of Environmental Restoration Technology
• /
• v.26 no.5
• /
• pp.1-18
• /
• 2023

The Ecosystem Conservation Levy (formerly known as the Ecosystem Conservation Cooperation Fund) system has been in place for 20 years, and it can be said that it has now entered the settlement stage. Based on an analysis of publicly available project implementation data from 2014 to 2020, we found that: 1) As the number of return projects increases, the targets of restoration technologies are also strengthening, and it is necessary to frame a series of processes from application, creation, and monitoring for some detailed projects to improve the effectiveness and efficiency of utilizing the levy. 2) Most of the implemented projects are applied as micro-ecosystem creation, but there are many cases where the contents of the project can be seen as other project categories. This shows that the purpose of the return project needs to be approached more clearly and suggests that institutional complementation is needed from the project application stage. 3) The detailed technologies applied tend to be gradually expanding, but most of them are technologies that are not differentiated from general development projects. It is urgent to secure a more technical identity, such as a range and list of utilized technologies suitable for the characteristics and purposes of return projects. 4) It is necessary to establish a relevant evaluation system or framework to utilize the monitoring results of restoration projects. 5) There have been few cases of application of single restoration technologies since the beginning, but the content and scope of the complexity tend to expand in recent years. Even if the objectives are not comprehensive and diverse, it can be seen that many parts of the projects are oriented toward convergence, so it is necessary to conduct separate research on this. 6) As for the direction of improvement of the return project, it is possible to consider expanding the restoration and conservation focus to partially accommodate the complexity of the natural environment and human ecology. It seems that the expansion of restoration technologies that consider the role and function of humans in the natural environment should be explored.

• Transactions on Electrical and Electronic Materials
• /
• v.16 no.6
• /
• pp.342-345
• /
• 2015

The n -type Hf_0.25Zr_0.25Ti_0.5NiSn_0.998Sb_0.002 Half-Heusler (HH) alloy composition was prepared by using the induction melting method in addition to the mechanical grinding, annealing, and spark plasma sintering processes. Analysis of X-ray diffraction (XRD) results indicated the formation of a pure phase HH structured compound. The electrical and thermal properties at temperatures ranging from room temperature to 718 K were investigated. The electrical conductivity increased with increasing temperatures and demonstrated nondegenerate semiconducting behavior, and a large reduction in the thermal conductivity to the value of 2.5 W/mK at room temperature was observed. With the power factor and thermal conductivity, the dimensionless figure of merit was increased with temperature and measured at 0.94 at 718 K for the compound synthesized by the induction melting process.

• Environmental Engineering Research
• /
• v.17 no.4
• /
• pp.185-190
• /
• 2012

Rejection characteristics of perchlorate ($ClO_4^-$) were examined for commercially available reverse osmosis (RO) and nanofiltration (NF) membranes. A bench-scale dead-end stirred-cell filtration system was employed to determine the toxic ion rejection and the membrane flux. Model water solutions were used to prepare $ClO_4^-$ solutions (approximately, $1,000{\mu}g/L$) in the presence of background salts (NaCl, $Na_2SO_4$, and $CaCl_2$) at various pH values (3.5, 7, and 9.5) and solution ionic strengths (0.001, 0.01, and 0.01 M NaCl) in the presence of natural organic matter (NOM). Rejection by the membranes increased with increasing solution pH owing to increasingly negative membrane charge. In addition, the rejection of the target ion by the membranes increased with increasing solution ionic strength. The rejection of $ClO_4^-$ was consistently higher for the RO membrane than for the NF membrane and $ClO_4^-$ rejection followed the order $CaCl_2$ < NaCl < $Na_2SO_4$ at conditions of constant pH and ionic strength for both the RO and NF membranes. The possible influence of NOM on $ClO_4^-$ rejection by the membranes was also explored.

• Journal of the Mineralogical Society of Korea
• /
• v.21 no.4
• /
• pp.425-434
• /
• 2008

Arsenic contamination in soil and groundwater has recently been one of the most serious environmental concerns. This arsenic contamination can be originated from natural or anthropogenic sources. It has been well known that arsenic behavior in geo-environmental is controlled by various oxides or hydroxides, such as those of iron, manganese, and aluminum, and clay minerals. Among those, particularly, iron (oxy)hydroxides are the most effective scavengers for arsenic. For this reason, this study characterized arsenic adsorption of magnetite which is a kind of iron oxide in nature. The physicochemcial features of the magnetite were investigated to evaluate adsorption of arsenite [As(III)] and arsenate [As(V)] onto magnetite. In addition to experiments on adsorption equilibria, kinetic experiments were also conducted. The point of zero charge (PZC) and specific surface area of the laboratory-synthesized magnetite used as an arsenic adsorbent were measured 6.56 and $16.6\;g/m^2$, which values seem to be relatively smaller than those of the other iron (oxy)hydroxides. From the results of equilibria experiments, arsenite was much more adsorbed onto magnetite than arsenate, indicating the affinity of arsenite on magnetite is larger than arsenate. Arsenite and arsenate showed adsorption maxima at pHs 7 and 2, respectively. In particular, adsorption of arsenate decreased with increase in pH as a result of electrical repulsion caused by anionic arsenate and negatively-charged surface of magnetite. These results indicate that the surface charge of magnetite and the chemical speciation of arsenic should be considered as the most crucial factors in controlling arsenic. The results of kinetic experiments show that arsenate was adsorbed more quickly than arsenite and adsorption of arsenic was investigated to be mostly completed within the duration of 4 hours, regardless of chemical speciation of arsenic. When the results of kinetic experiments were fitted to a variety of kinetic models proposed so far, power function and elovich model were evaluated to be the most suitable ones which can simulate adsorption kinetics of two kinds of arsenic species onto magnetite.

• Journal of Soil and Groundwater Environment
• /
• v.14 no.1
• /
• pp.29-35
• /
• 2009

In this study, the effect of pH and temperature on the adsorption behavior of acid mine drainage (AMD) on coal mine drainage sludge (CMDS) has been investigated during the treatment of coal mine drainage (CMD) by electrical purification method. The pH$_{zero\;point\;charge}$ (pH$_{zpc}$) of CMDS was 5. The removal ratio of copper, zinc, cadmium, iron were increased according to the increase of pH value. The adsorption amount of copper showed 0.64 mg g$^{-1}$ sludge. It was independent of pH value. The adsorption amount of the other metals showed l.l times when pH was 3. The adsorption amount of chromium was a little bit increased at the pH value higher than 7 due to a small amount of the chromium was eluted as $Cr(OH)_6^{3-}$. The amount of metals' absorption were decreased according to temperature was increase at pH value was 3. The selectivity order was Cd>Fe > Zn > Cu. The amount of absorption showed q$_{max}$ Cu 2.747 mg g$^{-1}$ andZn 2.525 mg g$^{-1}$ when pH value higher than 5. It was independent of temperature.

• Bulletin of the Korean Chemical Society
• /
• v.34 no.7
• /
• pp.2056-2062
• /
• 2013

The dihydroxy naphthalene/$TiO_2$ complexes with different substitution patterns were prepared by surface modification. X-ray diffraction, UV-Vis spectroscopy, photoluminescence, and X-ray photoelectron spectroscopy were used to characterize the prepared composite materials. The results indicated that the surface modification did not influence the crystallization of $TiO_2$. The visible-light absorbances of prepared dihydroxy naphthalene/$TiO_2$ complexes could be assigned to the ligand-to-metal charge transfer. The obtained catalyst exhibited outstanding photocatalytic activity and stability under visible light. A linear relationship existed between the percentages of hydroxynaphthalenes coordinated on $TiO_2$ surface and $H_2$ production ability. The substitution pattern of dihydroxy naphthalene and $CH_3OH$ content could also influence the photocatalytic performance remarkably. The photocatalytic $H_2$ production ability was further improved after loading with ultra low concentration of Pt, 0.02 wt %. The possible mechanism was proposed.

• Journal of the Korea Furniture Society
• /
• v.20 no.1
• /
• pp.31-41
• /
• 2009

In our country, most of the wood resources are imported. We faced a continuous rising of wood price by export country's some conditions and excess rising of transport charge, also a shortage of structural size members. In these situation, recycling or reuse of wood residues and wastes under wood processing industry, building construction and demolition is not a option but a prerequisite. In our country, there is a dearth of data on recycling or reuse of wood residues and wastes, so the investigation on the necessity of recycling or reuse of wood residues and wastes was conducted by using the foreign data and documents. First of all, fields and actual conditions for the domestic wood processing industry were surveyed. Then, kinds and signification of wood residues and wastes were organized. Later, the necessity and the signification of recycling or reuse of wood residues were investigated, and postulations for effective recycling and reuse were suggested. Above all, the necessity of grading standards for reuse or recycling and some important consideration for developing grading standards were emphasized. At last, foreign research tendencies and some applications on recycling or reuse of wood residues and wastes were supplemented.