• Environmental Engineering Research
• /
• v.15 no.2
• /
• pp.71-78
• /
• 2010

To understand the effects of acclimation schemes on the formation of anode biofilms, different electrical performances are characterized in this study, with the roles of suspended and attached bacteria in single-chamber microbial fuel cells (MFCs). The results show that the generation of current in single-chamber MFCs is significantly affected by the development of a biofilm matrix on the anode surface containing abundant immobilized microorganisms. The long-term operation with suspended microorganisms was demonstrated to form a dense biofilm matrix that was able to reduce the activation loss in MFCs. Also, a Pt-coated anode was not favorable for the initial or long-term bacterial attachment due to its high hydrophobicity (contact angle = $124^{\circ}$), which promotes easy detachment of the biofilm from the anode surface. Maximum power ($655.0\;mW/m^2$) was obtained at a current density of $3,358.8\;mA/m^2$ in the MFCs with longer acclimation periods. It was found that a dense biofilm was able to enhance the charge transfer rates due to the complex development of a biofilm matrix anchoring the electrochemically active microorganisms together on the anode surface. Among the major components of the extracellular polymeric substance, carbohydrates ($85.7\;mg/m^2_{anode}$) and proteins ($81.0\;mg/m^2_{anode}$) in the dense anode biofilm accounted for 17 and 19%, respectively, which are greater than those in the sparse anode biofilm.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.5 no.6
• /
• pp.120-127
• /
• 1997

A diesel engine is one of the major prime movers owing to its high thermal efficiency. But due to the recent attention for the environmental pollution, the emissions of diesel engine became a important problem. So it is needed to understand the characteristics of diesel spray injected into a combustion chamber. Because the diesel combustion is strongly controlled by a fuel spray injected into a combustion chamber. This study provides the informations for the diesel spray with the atmospere condition in combustion chamber by PMAS. As the result, the spray tip penetration and angle is increased with the increase of spray pressure and nozzle diameter. And the comparisions between the measured outline of the free-spray and the calculated model have been conducted and obtained the resonable results.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.13 no.8
• /
• pp.667-673
• /
• 2001

As an alternative cooling method to reduce environmental hazard, vortex tubes have been studied for energy separation into cold and hot streams. Hence, the experiments were carried out systematically to find the best ratio of vortex chamber diameter to tube diameter. Also, the work was don to investigate how inlet pressure and geometric ratios of vortex tube affected temperature differences at tow needs as ell as cooling capacity and cooling efficiency. The result showed that the maximum temperature differences at the both ends and the maximum cooling efficiency were obtained when the ratio of vortex chamber diameter was about 1.45, while the inlet pressure ws not higher than 0.7 MPa.

• Journal of Environmental Health Sciences
• /
• v.43 no.2
• /
• pp.95-102
• /
• 2017

Objectives: This study was conducted to evaluate the emission of VOCs from clothing that had been dry cleaned. Methods: In order to ensure the same conditions, f100% wool scarves were selected as the fabric type. Four identical tests were conducted on the option of either removing the plastic bags which came from the dry cleaning shop or not. The scarf was located inside a closet or room for one or two days. Small chamber tests were conducted to determine the VOC emission characteristics under the same conditions such as temperature, humidity, loading factor, and air exchange rates. Air from the chamber for VOCs was sampled by Tenax TA tube and analyzed by thermal desorption and GC/MSD. Results: Assuming that test represented dry cleaning and consumer's conditions well enough, we can conclude that immediate emissions after the dry cleaning of the scarfs caused elevated levels of TVOC, five VOCs (benzene, toluene, ethylbenzene, xylene, stylene), and decane group compounds. Conclusions: By removing the plastic bags which came from the dry cleaning shop or not, the storage conditions of dry cleaned scarfs by consumers during the storage time periods (one to three days) would be significant for reducing VOC emissions.

• Korean Journal of Environmental Agriculture
• /
• v.39 no.3
• /
• pp.237-245
• /
• 2020

BACKGROUND: The closed chamber method is the most commonly used for measuring greenhouse gas emissions from upland fields. This method has the advantages of being simple, easily available and economical. However, uncertainty estimation is essential for accurate assessment of greenhouse gas emissions and verification of emission reductions. The nitrous oxide emissions from upland field is very important for the nitrogen budget in the agriculture sectors. Although assessment of uncertainty components affecting nitrous oxide emission from upland field is necessary to take account of dispersion characteristics, research on these uncertainty components is very rare to date. This study aims at elucidation of influencing factors on measurement uncertainty of nitrous oxide concentrations measured by an automated open closed chamber method from upland field. METHODS AND RESULTS: The nitrous oxide sampling system is located in the upland field in Gyeonggi-do Agricultural Research and Extension Services (37°13'22"N, 127°02'22"E). The primary measurement uncertainty components influencing nitrous oxide concentrations (influencing factors) investigated in this research are repeatability, reproducibility and calibration in the aspects of nitrous oxide sampling and analytical instrumentation. The magnitudes of the relative standard uncertainty of each influencing factor are quantified and compared. CONCLUSION: Results of this study show what influencing factors are more important in determination of nitrous oxide concentrations measured using the automated open closed chambers located in the monitoring site. Quantifying the measurement uncertainty of the nitrous oxide concentrations in this study would contribute to improving measurement quality of nitrous oxide fluxes.

• Journal of the Korean Institute of Traditional Landscape Architecture
• /
• v.28 no.4
• /
• pp.120-126
• /
• 2010

As the importance of an historical area is getting increased in these days, the reconstruction of an bell chamber in Namhansansung has significant historial, educational and cultural meaning. The purpose of this study, as a study on an bell chamber in Namhansansung, is to assume an original location of the bell chamber and identify the size and shape of the original bell chamber through literature study, site inspection, and analysis on old maps. In addition, this study could provide useful information when new bell chamber is constructed. According to the literature study, site inspections(5 times) and analysis on old maps, the original bell chamber is assumed to locate near current Oroji tea house at the rotary, where was in the area of Hanggung. With regard to the traffic system, it is assume that there was an old road along with the current local road No.342 connecting the South Gate with North Gate and a Y or T shape intersection connecting the site of old bell chamber with the north. In addition, there was a government office street from the old bell chamber to Hanggung. The shape of old bell chamber is assumed to have Paljak or Woojingak roof. Samo roof was not found in all the five maps. Regarding the direction of bell chamber, three maps indicate that it faces the East and two maps show that it faces the South. Therefore, it is assumed that the length and width of the roof have similar size. However, a new bell chamber should face the East, which is the same direction with Hanggung. As there is a record which states that a bell in the Cheonheoungsa, Seonggeosan, Cheonan was used as a Namhansansung's bell when the Cheonheoungsa was closed, this study suggests that new Namansansung's bell should be built, considering histroical value and artistry of Cheonheoungsa's bell. This study is a basic research for the reconstruction of Namhansansung in 2009. However, as reconstruction of historical assets should be based on thorough historical evidences. Therefore, more detail researches by a indicator analysis are left for the topic of future studies.

• 제어로봇시스템학회:학술대회논문집
• /
• 1997.10a
• /
• pp.1371-1374
• /
• 1997

We had developed the on-line environmental monitoring system which has installed around Kori Nuclear Power Plants and will be taken the place of the existing system. The system consists of a main computer and 11 sets of radiation monitoring post equipments. Nal(Tl) scintillation detectro was adopted in addition to ion-chamber detector and implemented with DCU(Dose Conversion Unit) and SCA(Single Channel Analyzer). Compared with the existing system, it has revised feature in the radiation measurements which are detection of artificial radioactivity and 2-ways of the radiatiion detectors. The field test trsults show that the developed radiation detecting equipments can measure environmental radiation withn 5.0% of the theoretical value.

• Journal of Environmental Science International
• /
• v.20 no.3
• /
• pp.301-308
• /
• 2011

The temporal variations of methene emission and its relation to air temperature were investigated in Upo-swamp during June 2007 through July 2008. To perform this study, the methene emission and air temperature were observed using the buoy-type chamber and automatic weather observation system(AWS), respectively. The methene emissions were much during summertime(June~August). The maximum value(about 73.4 mg/$m^2$/hr) appeared at August. The emission diminished by degrees after August. The methene emissions were fewer from September to May of the following year. The peak value(73.4 mg/$m^2$/hr) of the methene emission is very much compared to that of rice pappy field known as about 28.7 mg/$m^2$/hr.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.9 no.2
• /
• pp.90-99
• /
• 1999

Fume extracting welding gun is one of the promising options for reducing the welder's fume exposure. The performance of the gun was assessed on the basis of capture efficiency. Capture efficiencies were measured in a test chamber recommended by American Welding Society. The overall capture efficiency was turned out to be above 95%. But it did not include the effect of crossdraft existing in the real work environment because all experiments were conducted in a closed chamber. It thus needs more work in the future. In addition, the future directions for improving the pres ent commercial techniques of the gun were discussed.

• Korean Journal of Agricultural and Forest Meteorology
• /
• v.20 no.1
• /
• pp.34-46
• /
• 2018

Climate change has become a major risk factor for the co-evolving ecological and societal systems that are interconnected through biogeochemical cycles. As the increasing emission of anthropogenic greenhouse gases (GHG) has been attributed to the principal cause of climate change, more attention has been given to the exchange between terrestrial sources/sinks of GHG and the atmosphere. In this review, we abridged a brief history of the background of GHG monitoring and the development of chamber method for the GHG measurement particularly from agriculture. Based on the reviews of prior domestic studies that analyzed the emission characteristics of GHG using chamber method, we discussed the concerns and the ways to improve chamber measurement to establish better scientific database for climate change adaptation.