• Proceedings of the Korea Concrete Institute Conference
• /
• 1998.04a
• /
• pp.57-62
• /
• 1998

As the waste concrete is increased by demolition according to the plan of city-reconstruction and preperation of city-environment etc, the production of waste concrete in the country is being very increased every years. Because the use of recycled aggregate is low, the cases of unlawful reclamation and disuse are increased. These occur the social and economic problems. This experimental study is to investigate the fluidity, compressive strength and durability of flowing recycled aggregate concrete using the river sand and recycled coarse aggregate according to the replacement rate of fly-ash and to present the fundamental data for the using of flowing recycled aggregate concrete.

• Proceedings of the KSME Conference
• /
• 2003.04a
• /
• pp.1609-1614
• /
• 2003

In this study, a practical holographic interferometric tomography system, which is instantaneous and non-contact for measuring three dimensional flow field, was developed. The system consists of holographic recording/reconstruction system, fringe analysis code and computational tomography code and it is developed with Gill environment for general users. The developed system was applied to three-dimensional natural convection from a discrete flush-mounted circular heat source on the bottom of a cubic enclosure. The heat source was located at the off-center of the bottom plate so that three-dimensional temperature field can be achieved. A set of multi-directional holographic interferograms was recorded by employing a double-reference beam, double-exposure holographic technique. Optical pathlength data were extracted from the recorded interferometric data and finally three dimensional temperature field inside the cube was reconstructed.

• Journal of the Korean Institute of Telematics and Electronics B
• /
• v.31B no.2
• /
• pp.1-9
• /
• 1994

In distributed environments, data replication increases availability and decreases communication cost. However, it is difficult to maintain consistency and availability of data if site failure occurs. When we use the conventional hierarchical quorum consensus(HQC) method in order to maintain the consistency of data, occurrence of site failures makes it harder to perform the operation on replicated data because of insufficient votes. The objective of this paper is to improve the possibility of retaining necessary votes by reconstructing the HQC structure, when the site failure occurs. Furthermore, we compare the modified HQC method with the conventional HQC and QC methods in terms of improvement of availability.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2003.05a
• /
• pp.223-228
• /
• 2003

Recently, owing to the deterioration of reconstruction and the construction, much of the construction waste is discharged in our construction field, and the amount of construction waste is rapidly increased. These waste are raised to financial and environmental problems, so the method of reusing waste concretes has been studied and carried out many direction. Especially being want of resources, if waste concrete could be recycled as aggregates for concrete, it will contribute to solve the exhaustion of natural aggregate, in terms of saving resources and protecting environment. This study is that the mechanical properties of concrete with recycled coarse aggregate were investigated for types of mineral admixture and the substitution of recycled coarse aggregate. The result of this study, in case of using mineral admixture, the property of fresh concrete was rised. And the property of harden concrete for the substitution ratio of recycled coarse aggregate was decreased. But the property of concrete with mineral admixture was better than that of concrete used only cement.

• Journal of Advanced Navigation Technology
• /
• v.14 no.5
• /
• pp.661-667
• /
• 2010

A lot of existence e-learning are connected SCORM and LMS. And u-learning was researching as one of the new trend. But there are few research paper to connect the existing SCORM and LMS. In this paper, we proposed u-learning framework with connect the SCORM and LMS. And we used the mobile equipment transform module and learning object reconstruction module to apply each different characteristics of mobile equipment. Especially, information of the mobile equipment was stored and managed using the meta-data of the equipment.

• Journal of the Korean Institute of Rural Architecture
• /
• v.9 no.3
• /
• pp.93-102
• /
• 2007

The purpose of this study is to find the method about the design factors considering the remodeling of apartment housing. Domestic remodeling operations has been developed incessantly. Recently, instead of redevelopment and reconstruction, remodeling operations is being generalization. Therefore by considering the related building code, this study seeks the revisions and try to understand the architectural character of apartment housing and find the design factors throughout the remodeling case of apartment housing. For instance, it is to make use of the flexible partition in unit plan or consider a various house plan etc. So by analyzing these remodeling design factor, we will be able to live the residential environment more extensive than previously.

• Annual Conference of KIPS
• /
• 2000.10a
• /
• pp.759-762
• /
• 2000

무선 채널 네트웍은 광범위하고 높은 에러발생률의 특성이 있다. 에러발생으로 인한 패킷의 손상이나 분실의 경우 화질에 심각한 영향을 미치게 된다. 본 논문에서는 DCT(Discrete Cosine Transform)을 기반으로 하는 고 압축 이미지의 손상된 데이터를 복구하기 위해 DCT 영역내 계수들의 분포 특성과 인접한 블록간의 유사성을 이용한 간단한 이미지 재구성 기법을 제안한다. 이러한 기법은 DCT 기반의 다양한 응용에 적용이 가능하며 적은 계산량을 가짐으로써 시스템의 낮은 전력 소모를 유지하여 무선컴퓨팅환경의 응용에 적합할 것이다.

• Journal of the Korean Institute of Educational Facilities
• /
• v.8 no.2
• /
• pp.5-12
• /
• 2001

As the exiting school facilities become old and unfit for new curriculum, the systematical remodelling process based on its educational and physical functions is required. due to the inadequate maintenance and repairing practices, unnecessary costs are expended. Therefore, this study aims to establish a remodelling decision-making model for improving the educational environment of the existing school facilities. According to the budget system, it proposes the concept of remodelling that includes the activities of extension, reconstruction, repair and improvement. This study classifies the performance evaluation for school facilities as that of safety, durability and educational function, and articulates the assessment standards, methods and elements. In the end, it suggests a rational model for remodelling decision-making that can provide efficient and comprehensive remodelling process, economic and sustainable school development.

• Journal of the Korea Safety Management & Science
• /
• v.5 no.2
• /
• pp.75-85
• /
• 2003

Manufacturing firms have adapted seriously the Design for Manufacture and Assembly (DFMA) techniques which consider concurrently all factors related to the product development by using effective communications and sharing of information on product development processes. This study performed modelling and characterizing the data related to product manufacturing information for Design for Manufacture(DFM) evaluation and analysis. It adapted component-based development method for communicating and managing manufacturing information among distributed manufacturing organizations. Introducing component-based development offers safety and speed to network based system. This development using Unified Modelling Language(UML) provides efficient way for reconstruction and distribution of applications. Also, the integration of database and component into the internet environment enables to communicate and manage effectively manufacturing information for DFM evaluation and analysis at any place in the world. Therefore this system can make it more reasonable that evaluating, analyzing, and effective decision making of product design using DFM technique.

• Proceedings of the IEEK Conference
• /
• 2000.07a
• /
• pp.58-61
• /
• 2000

In this paper, we describe an effective method to enhance the color night images with spatio-temporal multi-scale retinex focused to the Intelligent Transportation System (ITS) applications such as in the single CCD based Electronic Toll Collection System (ETCS). The basic spatial retinex is known to provide color constancy while effectively removing local shades. However, it is relatively ineffective in night vision enhancement. Our proposed method, STMSR, exploits the iterative time averaging of image sequences to suppress the noise in consideration of the moving vehicles in image frame. In the STMSR method, the spatial term makes the dark images distinguishable and preserves the color information day and night while the temporal term reduces the noise effect for sharper and clearer reconstruction of the contents in each image frame. We show through representative simulations that incorporating both terms in the modeling produces the output sequential images visually more pleasing than the original dim images.