• 한국측량학회:학술대회논문집
• /
• 한국측량학회 2003년도 추계학술발표회 논문집
• /
• pp.169-174
• /
• 2003

Design of a rational earth volume conversion coefficient is required as the earth volume conversion coefficient may give great influence on construction work volume and construction costs in the civil engineering works where large-scaled earth volume is excavated. However, there are a great deal of difficulties in the calculation of the exact spoil surface earth and Insufficient earth volume by adopting the figures presented on the generally used design specifications which are not the results obtained from the selection tests in calculating the earth volume conversion coefficient. In this connection, it would be desirable to calculate the earth volume conversion coefficient by carrying out large-scaled site test adequate for the relevant environment. In consequence, this study aims at calculating the exact earth volume conversion coefficient of cutting and banking areas of weathering rocks in large-scaled construction sites where land is being developed into home lots. For this, we have excavated the respective 20 sites of the cutting and banking areas in the said site and then calculated the volume after the excavation. As a result, the relative exactness degree of the crossing was calculated at 0.5% in average. The relative exactness degree of 0.5% in the volume may be judged as an exact measurement as it corresponds to 0.17% of the relative exactness degree in the length measurement. We have calculated the exact earth volume conversion coefficient by the use of function ratio as per the wet unit weight and the indoor soil quality test as per volume calculated. And then we have found out minor differences as a result of the comparison and analysis with the earth volume conversion coefficient determined by the dry unit weight test as per sand replacement method. This may be judged as a rational design method for the calculation of earth volume conversion coefficient, as well as high reliability of site test as a precision photogrammetry is adopted for volume measurement of the irregular excavating areas.

• 한국대기환경학회지
• /
• 제33권5호
• /
• pp.445-457
• /
• 2017

In this study, we developed an approach to better account for uncertainties in estimated contributions from fine particulate matter ($PM_{2.5}$) modeling. Our approach computes a Concentration Correction Factor (CCF) which is a ratio of observed concentrations to baseline model concentrations. We multiply modeled direct contribution estimates with CCF to obtain revised contributions. Overall, the modeling system showed reasonably good performance, correlation coefficient R of 0.82 and normalized mean bias of 2%, although the model underestimated some PM species concentrations. We also noticed that model biases vary seasonally. We compared contribution estimates of major source sectors before and after applying CCFs. We observed that different source sectors showed variable magnitudes of sensitivities to the CCF application. For example, the total primary $PM_{2.5}$ contribution was increased $2.4{\mu}g/m^3$ or 63% after the CCF application. Out of a $2.4{\mu}g/m^3$ increment, line sources and area source made up $1.3{\mu}g/m^3$ and $0.9{\mu}g/m^3$ which is 92% of the total contribution changes. We postulated two major reasons for variations in estimated contributions after the CCF application: (1) monthly variability of unadjusted contributions due to emission source characteristics and (2) physico-chemical differences in environmental conditions that emitted precursors undergo. Since emissions-to-$PM_{2.5}$ concentration conversion rate is an important piece of information to prioritize control strategy, we examined the effects of CCF application on the estimated conversion rates. We found that the application of CCFs can alter the rank of conversion efficiencies of source sectors. Finally, we discussed caveats of our current approach such as no consideration of ion neutralization which warrants further studies.

• Nuclear Engineering and Technology
• /
• 제52권3호
• /
• pp.538-543
• /
• 2020

Boric acid is used as a coolant for pressurized-water reactors, and the degree of burnup is controlled by the concentration of boric acid. Therefore, accurate measurement of the concentration of boric acid is an important factor in reactor safety. An improved system was proposed for the accurate determination of boron concentration. A new boron-concentration measurement technique, called multisensitive detection, was developed to improve the measurement accuracy of boron meters. In previous studies, laboratory-scale experiments were performed based on different sensitivity detectors, confirming a 65% better accuracy than conventional single-detector boron meters. Based on these experimental results, an experimental system simulating the coolant-circulation environment in the reactor was constructed; accuracy analysis of the boron meter with a multisensitivity detector was performed at the actual coolant pressure and temperature. In this study, the boron concentration conversion equation was derived from the calibration test, and the accuracy of the boron concentration conversion equation was examined through a repeatability test. Through the experiment, it was confirmed that the accuracy was up to 87.5% higher than the conventional single-detector boron meter.

• Journal of Ecology and Environment
• /
• 제35권3호
• /
• pp.243-249
• /
• 2012

Biomass expansion factors, which convert timber volume (or dry weight) to biomass, are used for estimating the forest biomass and accounting for the carbon budget at a regional or national scale. We estimated the biomass conversion and expansion factors (BCEF), biomass expansion factors (BEF), root to shoot ratio (R), and ecosystem biomass expansion factor (EBEF) for Quercus mongolica Fisch. and Quercus variabilis Bl. forests based on publications in Korea. The mean BCEF, BEF, and R for Q. mongolica was 1.0383 Mg/$m^3$ (N = 27; standard deviation [SD], 0.5515), 1.3572 (N = 27; SD, 0.1355), and 0.2017 (N = 32; SD, 0.0447), respectively. The mean BCEF, BEF, and R for Q. variabilis was 0.7164 Mg/$m^3$ (N = 17; SD, 0.3232), 1.2464 (N = 17; SD, 0.0823), and 0.1660 (N = 8; SD, 0.0632), respectively. The mean EBEF, as a simple method for estimating the ground vegetation biomass, was 1.0216 (N = 7; SD, 0.0232) for Q. mongolica forest ecosystems, and 1.0496 (N = 8; SD, 0.0725) for Q. variabilis forest ecosystems. The biomass expansion factor values in this study may be better estimates of forest biomass in Q. mongolica or Q. variabilis forests of Korea compared with the default values given by the Intergovernmental Panel on Climate Change (IPCC).

• 한국산업융합학회 논문집
• /
• 제27권3호
• /
• pp.609-618
• /
• 2024

System reliability prediction in the development stage is increasingly crucial to reliability growth management to satisfy its target reliability, since modern system usually takes a form of complex composition and various complicated functions. In most cases of development stage, however, the information available for system reliability prediction is very limited, making it difficult to predict system reliability more precisely as in the production and operating stages. In this study, a system reliability prediction process is considered when the reliability-related information such as SIL (Safety Integrity Level) and MTTFd (Mean Time to Dangerous Failure) is available in the development stage. It is suggested that when the SIL or MTTFd of a system component is known and the field operational data of similar system is given, the reliability prediction could be performed using the scaling factor for the SIL or MTTFd value of the component based on the similar system's field operational data analysis. Predicting a system reliability is then adjusted with the conversion factor reflecting the temperature condition of the environment in which the system actually operates. Finally, the case of applying the proposed system reliability prediction process to a high performance mooring platform is dealt with.

• 대한의용생체공학회:의공학회지
• /
• 제39권6호
• /
• pp.243-249
• /
• 2018

The indoor radon concentration was measured in the lecture room of the university and the radon concentration was converted to the amount related to the radon exposure using the dose conversion convention and compared with the reference levels for the radon concentration control. The effect of indoor radon inhalation was evaluated by estimating the life effective dose and the risk of exposure. To measure the radon concentration, measurements were made with a radon meter and a dedicated analysis Capture Ver. 5.5 program in a university lecture room from January to February 2018. The radon concentration measurement was carried out for 5 consecutive hours for 24 hours after keeping the airtight condition for 12 hours before the measurement. Radon exposure risk was calculated using the radon dose and dose conversion factor. Indoor radon concentration, radon exposure risk, and annual effective dose were found within the 95% confidence interval as the minimum and maximum boundary ranges. The radon concentration in the lecture room was $43.1-79.1Bq/m^3$, and the maximum boundary range within the 95% confidence interval was $77.7Bq/m^3$. The annual effective dose was estimated to be 0.20-0.36 mSv/y (mean 0.28 mSv/y). The life-time effective dose was estimated to be 0.66-1.18 mSv (mean $0.93{\pm}0.08mSv$). Life effective doses were estimated to be 0.88-0.99 mSv and radon exposure risk was estimated to be 12.4 out of 10.9 per 100,000. Radon concentration was measured, dose effective dose was evaluated using dose conversion convention, and degree of health hazard by indoor radon exposure was evaluated by predicting radon exposure risk using nominal hazard coefficient. It was concluded that indoor living environment could be applied to other specific exposure situations.

• 산경연구논집
• /
• 제13권4호
• /
• pp.35-49
• /
• 2022

Purpose - According to the recently changing consumer smart environment and consumer decision-making process, this study investigates the structural relationship between electronic(online) WOM information characteristics and brand community experience value types on specific brand reliability and brand transformation. In particular, the characteristics of word of mouth information and the experience value of brand community users were divided into detailed fac tors and approached. Methodology - In order to proceed with this study, we review previous studies and setting hypotheses. The hypothesis was verified through a survey that was conducted for the consumers with online consumption activities in less than six months. With reference to previous studies, operational definition was made for the questionnaire design. In order to verify the hypothesis, 282 people were statistically analyzed through the survey This data were used for AMOS for confirm hypothesis established. Results - eWOM information characteristics were classified into usefulness, timeliness and un-bias, and online community experience values were classified into interaction, playfulness, and virtuality. In addition, it is to investigate the relationship between the brand reliability and user's experience value in brad community. The main results are as follows. The first result was that usefulness and un-bias, which are the eWOM information characteristics had a positive effect on forming brand reliability. However, the factor of timeliness did not affect brand reliability. Second, in terms of user experience value and brand reliability in the brand community. It was fo und that experience values such as interaction, playfulness, and vituality all had a positive influence on brand reliability. Third, it was found that brand reliability has a positive influence on the on-line conversion activity of users. Conclusions - Through this study, the field of online consumer behavior research is expanding, and this study suggested that careful management is necessary according to the type or characteristics of eWOM information. Additionally, it presents the importance of the user's empirical value in the brand community influencing brand attitude and reliability. In practice, the implementation of the marketing communication mix in digital marketing has recently been underway to enhance the conversion behavior of users. At this level, it also reveals the preceding factors that increase user conversion behavior.

• 한국토양비료학회지
• /
• 제6권1호
• /
• pp.29-31
• /
• 1973

Upon the assumption that the available components in the soil evaluated by present analytical procedures, are as effective as the components applied to the soil as fertilizer, some formulas for the calculation of fertilizer requirements (F. R) for crops are suggested. Basically, the formulas are derived by combining the country average values of soil test data(${\overline{ST}}$) and of the optimum rate of fertilizers (ORF) for crops obtained from N.P.K. trials in farmer's field, as following. $$F.R(kg/10a)={\overline{ST}}(kg/10a)+ORFkg/10a-ST(kg/10a)$$ where, ST denotes the available components tested in the soil under question. Although this formula can be used both for P and K fertilizers, considering the significance of the potassium saturation rate of the soil for the availability of K, for the calculation of K fertilizer requirement, following formula is suggested. $$F.R(kg/10a)=(C.E.C.{\times}B.S.R.K.-KST(me/100g){\times}CF$$ where, B. S. R. K. is the basic potassium saturation rate of the soil and CF is conversion factor for the conversion of K me/100g into $K_2O$ kg/10a. The B. S. R. K. for different crops are obtained from the country average values of soil exchangeable K (${\overline{KST}}$), cation exchange capacity (CEC) and the optimum rates of K fertilizers for crops (ORF $K_2O$). $$B.S.R.K.=\frac{{\overline{KST}}{\times}CF+ORF(K_2O)}{CEC{\times}CF}$$ Using these formulas, equations for P and K fertilizer requirements for rice, barley, wheat, corn, italian millet, soy bean, sweet potato, potato and rape are derived.

• 정보보호학회논문지
• /
• 제25권2호
• /
• pp.411-421
• /
• 2015

최근 빠르게 발전을 이룬 ICT (Information and Communications Technologies) 기술과 IoT (Internet of Things) 기술이 융합되어가고 있다. 그에 따라 ICT 환경에서 발생하였던 보안 위협들이 IoT 환경에서도 이어지고 있다. IoT의 사물로 간주되는 차량에 있어 보안 위협은 재산피해와 인명피해를 가져올 수 있다. 현재 차량 보안에 대한 대비는 미흡하고, 차량 자체에서 스스로 위협을 감지하고 대응하는 것에는 어려움이 존재하는 실정이다. 본 연구에서는 차량에서의 이상징후 탐지를 위한 의사결정 프레임워크를 제안하고, 이를 통해 IoT 관점에서 발생할 수 있는 차량 내 위협 요소들은 어떤 것이 있는지 알아보고자 한다. 차량을 대상으로 하는 공격에 대한 위협 요인과 위협 경로, 공격 형태 등을 인지하는 것은 자가 점검 기술과 디바이스 제어 공격에 대한 신속한 대처에 앞서 차량 보안 이슈를 해결하기 위한 전제가 될 것이다.

• 아태비즈니스연구
• /
• 제12권4호
• /
• pp.271-288
• /
• 2021

Purpose - The purpose of this study is to identify the critical factors that restaurant management should consider strategically when making a decision after COVID-19 under the digital transformation and non-contact service expansions environment. Design/methodology/approach - The thirty six experts and managers who have 5 years or more experience in restaurant industry in Korea participate this study. The Analytic Hierarchy Process (AHP) and SER-M were used to analyze the experts' opinion Findings - As a result of the analysis, 'management environment' (0.313) showed the highest relative importance priority, followed by 'brand (0.263)', 'management characteristics (0.254)', and 'physical factors (0.17)'. And, as for the sub-factor value, 'lifestyle (0.087)', 'awareness (0.084)', 'consumer desire (0.075)', and 'loyalty (0.068)' were ranked highest among the 19 influencing critical factors. Research implications or Originality - In the case of large restaurant enterprises, it is judged that the subject(CEO, Management) is actively pursuing a strategy to acquire the necessary resources for the given environment of digital transformation and customer demand for non-contact services. On the other hand, in the case of middle and small restaurant enterprises, it seems that they are fully aware of the demand for expansion of non-contact services and the digital transformation required in the post COVID-19 era, but information technology utilization ability, usage experience, technology acceptance ability, and education and training support for this are only available to large enterprises.