• Korean Journal of Ecology and Environment
• /
• v.45 no.2
• /
• pp.190-199
• /
• 2012

The reproductive ecology of an endangered species, Gobiobotia macrocephala (Pisces: Cyprinidae), was investigated in the Seom River, a tributary of the Han River drainage system, from March 2010 to February 2011. During the non-spawning season, no difference in the external morphology was observed between males and females; however, during the spawning season, clear differences merged for the depth and width of the body, preventral length and preanal length in the standard length. The sex ratio of females to males was 1 : 1.01. The spawning season was estimated to last from late April to middle of June, at water temperatures of $15{\sim}25^{\circ}C$. The number of mature eggs in the ovary averaged about $2,134{\pm}930$ (mean${\pm}$SD), and the mean diameter was approximately $0.88{\pm}0.04$ mm. The spawning area was composed of pebble and cobble bottoms (3~10 cm), with current velocities of 13~24 cm $s^{-1}$ and water depths of 12~18 cm. Spawning behavior between males and females was observed in a water tank 14~15 h after injecting females with Ovaprim to promote reproduction. Fish spawned near the water surface with monogamous pairing.

• Journal of Information Management
• /
• v.37 no.2
• /
• pp.1-20
• /
• 2006

It has lately been recognized that the sharing and exchanging of the research results information is the critical factor to improve the research productivity. So many institutions are planning or developing the information systems which provide the research information services for researcher. But it has very difficulty in integrating the research resources information due to the dispersion and heterogeneity in data sources, and semantic and structural difference in describing data. We propose the semantic web based methodology and conceptual framework for raising the interoperability of metadata about research results information, which will support the integration of the distributed research data for information services in the end. We first introduce the ontology which is developed based on Standard Metadata of Research Results Information published by STISC. Then to show the applicability in real-world environment, we express the metadata of research information in RDF/RDFS according to ontology. Finally we proposed the conceptual architecture of research information service system which shows the main components, the functional requirements, and the principal and design direction at implementing the system.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.22 no.1
• /
• pp.58-66
• /
• 2010

In this paper, we have constructed high-resolution topographical map of macro-tidal Malipo beach through integration of terrestrial LiDAR measurement and MBES survey data at inter-tidal zone. To acquire the enough information of inter-tidal zone, we have done terrestrial LiDAR measurement mounted on the roof of vehicle with DGPS through go-stop-scan method at the ebb tide and MBES depth surveying with tide gauge and eye staff measurement for tide correction and MSL calculation at the high tide all together. To integrate two kinds of data, we have unified the vertical coordination standard to Incheon MSL. The mean error of overlapped inter-tidal zone is about 2~6 cm. To verify the accuracy of terrestrial LiDAR, RTK-DGPS measurement have done simultaneously and the difference of Z value RMSE is about 4~7 cm. The resolution of Malipo topographical map is 50 cm and it has constructed to DEM (Digital Elevation Model) based on GIS. Now it has used as an input topography information for the storm-surge inundation prediction models. Also it will be possible to use monitoring of beach process through the long-term periodic measurement and GIS-based 3D spatial analysis calculating the erosion and deposition considering with the artificial beach transition and coastal environmental parameters.

• Analytical Science and Technology
• /
• v.23 no.2
• /
• pp.138-146
• /
• 2010

The Korean Ministry of the Environment revised a few sections of the regulations in the Law of indoor air quality management for the reinforcement or adjustment of the regulation criteria standard for releasing pollutants from building materials. Especially, in case of sealant, the contents covering liquid building materials, excess standards and testing methods have been added simultaneously in this revision, As a result it is impossible to compare original standards with revised standards directly. For this reason, this study reviewed revised test method of sealant pollutant emission rates in terms of impact and validity in comparison with the original test method. Through this study, the basic properties of revised pollutant emission control standards was assessed. Especially in sealant, since each product has a wide deviation of time required for complete drying, it is proved that there are a large number of products that are not hardened completely in test time. The result of our experiments on the revised test methods showed that this revised test methods yield emission rates that are two and half times less than those of the original testing method. To apply the revised test method of sealant to all the sealant products, It is necessary to extend the test period or improve specimen to fit the test method for quickly drying sealant products.

• Analytical Science and Technology
• /
• v.27 no.5
• /
• pp.243-247
• /
• 2014

Formaldehyde is defined as carcinogen causing leukaemia, lymphoma or nasopharyngeal carcinoma at high level of exposure. Furniture-manufacturing workers can be exposed to formaldehyde, which implies serious impact on health of the workers. The authors carried out ambient monitoring of formaldehyde in the field, and identified the source of formaldehyde generated during the working process by testing the condition in the laboratory settings. After sampling formaldehyde in the air with 2,4-DNPH (2,4-dinitrophenylhydrazine) coated silica gel, we extracted formaldehyde derivative with acetonitrile and analyzed the extract using HPLC with UV detector at 360 nm. Formaldehyde was separated by ACQUITY UPLC BEH $C_{18}$ column at a flow rate of 0.5 mL/min using 45% acetonitrile as mobile phase. The workers were exposed to higher level of formaldehyde than normal air. Formaldehyde up to 0.31 ppm was detected in the process of veneer attachment, which exceeded 0.3 ppm, the ceiling value of ACGIH standard. The laboratory test of measuring formaldehyde generated from the glue and veneer used in the attachment process resulted in more formaldehyde generation as the temperature increased, and more from the veneer. Heating the veneer to $100-150^{\circ}C$ following the real condition of the manufacturing site generated 1.14-2.70 ppm of formaldehyde from the sample, which was 2-5 times higher level than Korean limit of exposure (0.5 ppm). As the workers handling and processing the veneer which was produced by wet process had high possibility to be exposed to formaldehyde, urgent improvement and management of working environment of furniture manufacturer is demanded.

• Korean Journal of Environmental Biology
• /
• v.17 no.3
• /
• pp.337-344
• /
• 1999

This study was carried out to investigate the influence of spa sewage on water quality and chemical contents in the paddy soil along stream from 1997 to 1998. Concentration of $PO_4, SO_4, Cl, NH_{4}, Ca, Na$ and COD in the spa sewage were lower than standard for agricultural usage, and were lowered as the sewage flew to the into stream. The concentration of $SO_4$in spa sewage was over the criteria for agricultural usage in the inlet, but was lower than criteria for agricultural usage by inlet of non polluted stream water. Concentration of pollutants in the sediment of water channel were the highest in the inlet site. There were no pollutants accumulation in the paddy soil where spa sewage was irrigated. It may be resulted from nutrients uptake of rice plant and self purification of paddy soil. On the while, considering electric conductivity and nitrate in spa sewage, this results suggest that long-term irrigation of the spa sewage may be required general management with some decreasing fertilization.

• Journal of Environmental Impact Assessment
• /
• v.25 no.3
• /
• pp.222-232
• /
• 2016

Water Footprint is utilized to analyze direct and indirect water consumption for sustainable water resource management. This study aims to understand potential applicability of water footprint concept by analyzing the status of water consumption and related water policies in Seoul. We analyzed a direct gray water footprint and the blue water footprint in Seoul affected by the social and economic characteristics of the consumers in the city. In particular, in order to analyze the blue water footprint represented by both surface and underground water for the provision and consumption of products, we calculated the actual water consumptions of surface and underground water for 25 districts in Seoul. Our analysis in consideration of population and households indicates that Jung-gu has the highest blue water footprint followed by Jongro-gu, Gangnam-gu, Yongsan-gu, and Seocho-gu. Gray water footprint was calculated by estimating the amount of water for purifying wastewater to meet the water quality standard (above BOD 3.5ppm) for each district. As a result, Jung-gu has the highest gray water footprint, followed by Jongro-gu, Gangnam-gu, Yongsan-gu, Seocho-gu, and Youngdeungpo-gu. Our study suggests the potential value of using water footprint concept to complement the current limitations of water use management focusing on water supply control. We expect that our analysis will provide an important basis for considering water use management which is economically and socially more resilient and sustainable.

• Journal of KIISE:Software and Applications
• /
• v.33 no.2
• /
• pp.201-219
• /
• 2006

The key to developing software with the lowest cost and highest quality is to implement or fit the software development process into a given environment. Generally, applying commercial or standard software development processes on a specific project can cause too much overhead if there is no effort to customize the given generic processes. Even though the customizing activities are done before starting the project, these activities are thoroughly dependent on the process engineers who have abundant experience and knowledge with tailoring processes. Owing to this dependence on human knowledge, it has been very difficult to explain the rationale for the results of process tailoring and it takes a long time to get the customized process that is applicable. Hence, we suggest a process tailoring method which adopts the artificial neural network based teaming theory to reduce the time consumed by process tailoring. Furthermore, we suggest the feedback loop mechanism to get higher accuracy in the neural network designed for the process tailoring. It can be done by reusing the process tailoring data results and determining its appropriateness level as sample data to the neural network. We proved the effectiveness of our process tailoring method through case studies using real historical data, which yielded abundant process tailoring results as sample data.

• Journal of Korea Society of Industrial Information Systems
• /
• v.18 no.2
• /
• pp.71-83
• /
• 2013

Because of rapid advance of wireless Internet-related technology and fast diffusion of Smart phone, a variety of mobile applications through domestic and foreign app stores have been made and used. Under the recognition of current trend, both central government and local government have developed and provided public mobile app in order to accomplish the mobile e-government. However, public mobile app is not popular in spite of vast investment for its development and service. This study investigated current issues and problems of public mobile app in public service, management, and technology aspects. To do so, this study categorized the interested people of public mobile app into users, providers, and developers, and conducted deep interviews to them. Based on the interview results, the study suggested the following recommendations for the activating tools of public mobile app: providing user-customized information, fruitfulness of public information management, maintenance of management system for public mobile app service, user-friendly promotion appropriate in mobile environment, public mobile app development based on e-government standard framework, etc.. This study may provide the researchers with the successive study guidelines in mobile e-government and public mobile app fields. Also, the study may help the practitioners to make effective decisions on polices and strategies for mobile e-government of local government.

• Atmosphere
• /
• v.21 no.1
• /
• pp.57-67
• /
• 2011

Aerosol lidar ratio (extinction-to-backscatter ratio) at 532 nm was determined using 4-year measurements of elastic-backscatter lidar and sky radiometer at Seoul National University of Seoul, Korea. The mean lidar ratio (with standard deviation) based on 4 years of measurements is found to be $61.7{\pm}16.5$ sr, and weak seasonal variations are noted with a maximum in JJA ($68.1{\pm}16.8$ sr) and a minimum in DJF ($57.2{\pm}17.9$ sr). The lidar ratios for clean, dust, and polluted conditions are estimated to be $45.0{\pm}9.5$ sr, $51.7{\pm}13.7$ sr, and $62.2{\pm}13.2$ sr, respectively. While the lidar ratio for the polluted condition is appears to be consistent with previous studies, clean and dust conditions tend to have larger ratios, compared to previous estimates. This discrepancy is thought to be mainly due to the anthropogenic aerosols existing throughout the year around Seoul, which may cause increased lidar ratios even for clean and dust conditions.