• Journal of Korea Society of Waste Management
• /
• v.35 no.8
• /
• pp.744-753
• /
• 2018

The Stockholm Convention, which was adopted in Sweden in 2001 to protect human health and the environment, includes regulations for Persistent Organic Pollutant Rotors such as toxic and bioaccumulatives. Currently, there are 28 types of materials. This prohibits and limits the production, use, and manufacture of products. Korea is a member of the Convention, and it is necessary to prepare management and treatment plans to address the POP trends. Thus, we experimentally investigate whether the environmentally stable incineration is achieved when the sample is thermally treated using the Lab-scale (1 kg/hr). The target samples is pesticides in liquid phase and solid phase. In this study, organic chlorinated pesticides and their thermal characteristics were analyzed. We calculated the theoretical air volume based on the element analysis results. Because the interior of the reactor is small, more than 10 times of the air ratio was injected. The retention time was set to at least 4 seconds using a margin. The incineration temperature was $850^{\circ}C$ and $1100^{\circ}C$. Thus, we experimentally investigated whether the environmentally stable incineration was achieved when the sample was thermally treated using the Lab-scale (1 kg/hr). We analyzed five types of exhaust gas; the 02 concentration was high, but the CO amount decreased. Complete combustion is difficult because of the small size of the furnace due to the nature of Lab-scale. The organic chlorine-containing pesticide had an average decomposition rate of 99.9935%. Considering the decomposition rates of organic chlorine-containing pesticide in this study, the incineration treatment at over 2 ton/hour, which is typical for a conventional incinerator, is possible. Considering the occurrence of dioxins and unintentional persistent organic pollutants, it can operate at more than $1,100^{\circ}C$.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.21 no.12
• /
• pp.772-781
• /
• 2020

A direct shear member resists external forces through the shear transfer of reinforcing bars placed at the concrete interface. The current concrete structural design code uses empirical formulas based on the shear friction analogy, which is applied to the horizontal shear of concrete composite beams. However, in the case of a member with a large amount of reinforcing bars, the shear strength obtained through the empirical formula is lower than the measured value. In this paper, the limit state of newly constructed composite beams on an existing concrete girder is defined using stress field theory, and material constitutive laws are applied to gain horizontal shear strength while considering the tension-stiffening and softening effects of concrete struts. A simplified method of calculating the shear strength is proposed, which was validated by comparing it with the related design code provisions. As a result, it was confirmed that the method generally shows a similar tendency to the experimental results when the shear reinforcing bar yields, unlike the regulations of the design code, where differences in the predicted value of shear strength occur according to the shear reinforcement ratio.

• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.13 no.6
• /
• pp.556-561
• /
• 2020

The aging and declining agricultural population in the modern society requires improvement of the agricultural environment and is one of the representative problems. And since most of the work systems always require a transport work, the ratio of labor consumed in the transport work is very high. Accordingly, many types of transport vehicles are being developed and sold, and in the early days, most of them are powered transport vehicles using fossil fuels. However, it is paying attention to next-generation eco-friendly energy such as hydrogen, fuel cells, solar power, and bio due to the strengthening of international environmental regulations such as global warming and the Convention on Climate Change and the depletion of fossil fuels. Therefore, in this study, the ultimate goal is to develop an eco-friendly, easy-to-operate, safe agricultural electric vehicle that replaces fossil fuels. It was designed with a focus on controlling a wide range of vehicle speeds and securing stability of electric agricultural vehicles. Considering the performance and design, it is composed of a frame, a driving part, a steering part, and a controller system, and we are going to review and manufacture each part. It is believed that the manufactured electric vehicle for agriculture can be easily and conveniently operated in an agricultural society where young manpower is scarce, and can be helpful to the agricultural society through high efficiency.

• Journal of the Korean Society of Environmental Restoration Technology
• /
• v.24 no.6
• /
• pp.1-13
• /
• 2021

This study was performed to investigate the ecosystem service patterns in relation to climate change acceleration utilizing big data analysis. This study aimed to use big data analysis as one of the network of views to identify convergent thinking in two fields: climate change and ecosystem service. The keywords were analysed to ascertain if there were any differences in the perceiving problems, policy direction, climate change implications, and regional differences. In addition, we examined the research keywords of each continent, the centre of ecosystem service research, and the topics to be referred to in domestic research. The results of the analysis are as follows: First, the keyword centrality of climate change is similar to the detailed indicators of The Intergovernmental Science-Policy Platform on Biodiversity and Ecosystem Services (IPBES) regulations, content, and non-material ecosystem services. Second, the cross-analysis of terms in two journals showed a difference in value-oriented point; the Ecosystem Service Journal identified green infrastructure as having economic value, whereas the Climate Change Journal perceives water, forest, carbon, and biodiversity as management topics. The Climate Change Journal, but not the former, focuses on future predictions. Third, the analysis of the research topics according to continents showed that water and soil are closely related to the economy, and thus, play an important role in policy formulation. This disparity is due to differences in each continent's environmental characteristics, as well as economic and policy issues. This fact can be used to refer to the direction of research on ecosystem services in Korea. Consistent with the recent trend of expanding research regarding the impacts of climate change, it is necessary to study strategies to scientifically predict and respond to the negative effects of climate change.

• Journal of muscle and joint health
• /
• v.29 no.1
• /
• pp.69-80
• /
• 2022

Purpose: To identify research trends in the Journal of Muscle and Joint Health. Methods: In total, 315 studies published between 2008 and 2020 in the Journal of Muscle and Joint Health were reviewed using analysis criteria developed by the authors Results: Most participants were adults or older adults, they mostly had arthritis. The types of research design were descriptive research (46.4%), quasi-experimental design (21.9%), randomized controlled trial (1.9%), and qualitative research (4.1%). The occupation of most authors was professor in universities (61.0%). Data were collected mostly in hospitals (41.6%) or communities (24.4%) using a questionnaire (52.4%). Written consent was obtained at 75.6% and 47.9% of studies were approved by the Institutional Review Board (IRB). The instruments measuring physical concepts such as pain, flexibility, sense of balance and fatigue were mostly used. The most common interventions in experimental studies were physical interventions, with the main being exercise. Key words were categorized into four nursing meta-paradigms: human, health, environment and nursing. The most frequently reported key words were included in the health domain. The most frequently used key words were physical intervention, older patient, osteoarthritis, pain and depression. Conclusion: The results suggest that more research studies targeting various age groups related to muscle and joint health are required. Additionally there is a need to increase the number of qualitative studies, randomized experimental studies, and systematic review studies. It is necessary to pay attention to compliance with research ethics publication regulations.

• Tunnel and Underground Space
• /
• v.32 no.2
• /
• pp.107-119
• /
• 2022

Excavation-Disturbed Zone (EDZ) is an important design factor in constructing final disposal facilities for spent nuclear fuel, since EDZ affects mechanical stability including a spacing between disposal holes, and the hydraulic properties within EDZ plays a significant role in estimating in-flow rate of groundwater as well as a subsequent corrosion rate of a canister. Thus, it is highly required to characterize in-situ EDZ with precision and control the EDZ occurrence while excavating disposal facilities and constructing relevant underground research facilities. In this report, we not only reviewed EDZ-related researches carried out in the ONKALO facility of Finland but also examined appropriate methods for field inspection and quality control of EDZ occurrence. From the review, GPR can be the most efficient method for in-situ characterization of EDZ since it does not demand drilling a borehole that may disturb a surrounding environment of caverns. And the EDZ occurrence was dominant at a cavern floor and it ranged from 0 to 70 cm. These can provide useful information in developing necessary EDZ-related regulations for domestic disposal facilities.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.40 no.3
• /
• pp.217-226
• /
• 2022

In the view of the application of high-precision spatial information production, UAV (Umanned Aerial Vehicle)-Photogrammetry has a problem in that it lacks specific procedures and detailed regulations for quantitative quality verification methods or certification of captured images. In addition, test tools for UAV image quality assessment use only the GSD (Ground Sample Distance), not MTF (Modulation Transfer Function), which reflects image resolution and contrast at the same time. This fact makes often the quality of UAV image inferior to that of manned aerial image. We performed MTF and GSD analysis simultaneously using a siemens star to confirm the necessity of MTF analysis in UAV image quality assessment. The analyzing results of UAV images taken with different payload and sensors show that there is a big difference in σ_MTF values, representing image resolution and the degree of contrast, but slightly different in GSD. It concluded that the MTF analysis is a more objective and reliable analysis method than just the GSD analysis method, and high-quality drone images can only be obtained when the operator make images after judging the proper selection the sensor performance, image overlaps, and payload type. However, the results of this study are derived from analyzing only images acquired by limited sensors and imaging conditions. It is therefore expected that more objective and reliable results will be obtained if continuous research is conducted by accumulating various experimental data in related fields in the future.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.32 no.1
• /
• pp.41-52
• /
• 2022

Objectives: This study intends to review the impact on cleaning workers and suggest directions for improvement by reviewing the legal and institutional ways in which Article 86 Nos. 7 and 16 of the Enforcement Decree of the Occupational Safety and Health Act work on the maintenance and promotion of cleaning workers' health. Methods: The following laws and systems were reviewed and considered: First, the occupational safety and health legislation obligated or required to be applied to protect the health of cleaning workers; Second, the status of control of chemicals or mixtures used at cleaning sites through the Consumer Chemicals Product and Biocide Safety Control Act; Third, Control of consumer products according to foreign material safety data sheet related laws. Results: Legal and institutional measures necessary to protect the health of cleaning workers include the legal control of harmful substances to be controlled, work environment monitoring, and special health examinations. The application of the Consumer Chemicals Product and Biocide Safety Control Act does not satisfy the legal and practical level of health maintenance and promotion required by the Occupational Safety and Health Act, and the communication of chemical information is insufficient. Overseas, there are restrictions on the use of consumer products in the workplace without material safety data sheets. Conclusions: It is necessary to improve the system to ensure the health of workers handling consumer chemical products. The remaining laws and regulations exempted from the obligation to prepare material safety data sheets should be additionally reviewed.

• Korean Chemical Engineering Research
• /
• v.60 no.4
• /
• pp.492-498
• /
• 2022

Process control systems used in most domestic petrochemical corporates today are based on the Windows platforms. As technology leans toward opened environment, the exposure risk of control systems is increasing. However, not many companies are preparing for various cyberattacks due to lack of awareness and misunderstanding of cyber intrusion. This study investigated the extent of how much exposed the petrochemical process control system is to security threats and suggested practical measures to reduce OT cybersecurity vulnerabilities. To identify the cyber threat status of process control systems, vulnerabilities of the Windows platform, a principal cyber threat factor, have been analyzed. For research, three major DCS providers in Korea and the discontinuation of Windows platform of 635 control systems were investigated. It was confirmed that 78% of the survey subjects were still operating in the discontinued windows platforms, and those process control systems were operated in a state vulnerable to cyber intrusions. In order to actively cope with these cyber threats, legal regulations such as designation of critical infrastructure for major petrochemical facilities which is implemented in advanced countries such as the United States are needed. Additionally, it is necessary to take the initiative in eradicating security threats to the process control systems by aggressively introducing security solutions provided from existing DCS suppliers. This paper was submitted to Professor Ko JaeWook's retirement anniversary issue.

• Safety and Health at Work
• /
• v.13 no.2
• /
• pp.163-169
• /
• 2022

Background: It is estimated that about 13 million artisanal and small-scale miners carry out their activities under harsh, precarious, unfriendly, and risky conditions. Yet, our understanding of the extent to which these workers use personal protective equipment (PPE) and navigate through the various risks and hazards they face is still limited. This article has two main objectives. First, it explores the extent of usage of PPE among artisanal and small-scale miners for the prevention of hazards and risks. Second, it examines the coping strategies used by these miners as a response to experiences of occupational injuries and risks Methods: A cross-sectional survey of small-scale miners was conducted in six communities across three districts in Ghana, West Africa. The mixed methods approach was adopted. A total of 148 small-scale miners participated in the study. Six focus group discussions (FGDs) were held across the six communities. The data were analysed using descriptive statistics. Chi-square tests were used to analyse the relationship between some socio-demographic characteristics (sex, age, and educational background) and the usage of PPE. Open-ended questions and responses from FGDs were analysed based on the content and verbatim quotations from miners. Results: Findings suggest that 78% of the miners interviewed do not use the appropriate PPE citing reasons such as cost, and their personal discomfort associated with use of PPE. There was no significant relationship between socio-demographic characteristics (i.e., sex, age, education and major mining activity) and the usage of PPE. The study further revealed four main coping strategies used by miners to handle the risks. These are rest, taking unprescribed medication and hard drugs, registration with health insurance scheme and savings and investments. Conclusion: This study shows that very few artisanal miners use PPE despite the significant hazards and risks to which they are exposed. The study recommends to the government to put in place measures to ensure that miners adhere to health and safety regulations before undertaking mining activities. This means that health and safety plans and use of PPE should be linked to the license acquisition process for miners.