• 전기전자학회논문지
• /
• 제22권4호
• /
• pp.1019-1024
• /
• 2018

In this paper, we suggest a combined cost function to find out the optimal operation of an envelope tracking system, and evaluated its performance with Quadrature Amplitude Modulation (QAM) waveform, with which envelope tracking coefficients for the peak drain efficiency and the bandwidth of power amplifiers are determined. Based on the classical envelope tracking theory, the operation of the supply modulator, which is a key part of the envelope tracking process, is modeled and analyzed mathematically. Then characteristics of the modulator by setting envelope shaping function as a cubic polynomial and sweeping the coefficients of this function was analyzed. By sweeping the coefficients, efficiency and bandwidth at each condition with 64-QAM signal was used to obtain optimal point of the supply modulator. Compared to the conventional shaping functions, the optimized function showed the bandwidth reduction by 12.7 percent point while the efficiency was maintained.

• 대한기계학회논문집A
• /
• 제26권4호
• /
• pp.720-730
• /
• 2002

Automated design of large structures requires efficient and accurate optimization algorithms because of a large number of design variables and design constraints. The objective of this study is to examine the characteristics of the Kreisselmeier -Steinhauser envelope function and to investigate va tidily of accumulating constraint functions into a small number of constraint functions or even into a single constraint function. The commercial package DOT is adopted as a local optimizer. The optimum results using the envelope function are compared with those of the conventional method for a number of numerical examples and the differences between them are shown to be negligible.

• ETRI Journal
• /
• 제21권1호
• /
• pp.1-27
• /
• 1999

We present a new description of envelope-function equation of the superlattice (SL). The SL wave function and corresponding effective-mass equation are formulated in terms of a linear combination of Bloch states of the constituent material with smaller band gap. In this envelope-function formalism, we review the fundamental concept on the motion of a wave packet in the SL structure subjected to steady and uniform electric fields F. The review confirms that the average of SL crystal momentums K = ($k_x,k_y,q$), where ($K_x,k_y$) are bulk inplane wave vectors and q SL wave vector, included in a wave packet satisfies the equation of motion = $_0+Ft/h$; and that the velocity and acceleration theorems provide the same type of group velocity and definition of the effective mass tensor, respectively, as in the Bulk. Finally, Schlosser and Marcus's method for the band theory of metals has been by Altarelli to include the interface-matching condition in the variational calculation for the SL structure in the multi-band envelope-function approximation. We re-examine this procedure more thoroughly and present variational equations in both general and reduced forms for SLs, which agrees in form with the proposed envelope-function formalism. As an illustration of the application of the present work and also for a brief investigation of effects of band-parameter difference on the subband energy structure, we calculate by the proposed variational method energies of non-strained $GaAs/Al_{0.32}Ga_{0.68}As$ and strained $In_{0.63}Ga_{0.37}As/In_{0.73}Ga_{0.27}As_{0.58}P_{0.42}SLs$ with well/barrier widths of $60{\AA}/500{\AA}$ and 30${\AA}/30{\AA}$, respectively.

• Journal of applied mathematics & informatics
• /
• 제9권2호
• /
• pp.745-751
• /
• 2002

In this paper, we Shall find the unique rational price associated with the exchange option. Also, we find the decomposition of Snell envelope and value function of the American exchange option.

• 한국진공학회지
• /
• 제1권1호
• /
• pp.60-66
• /
• 1992

초격자와 다양자우물이 가질 수 있는 모든 구조에 대한 subband와 입자의 envelope 파동함수를 계산할 수 있는 방법을 제시하고 단순조성 초격자와 $\delta$-dopping 초격 자에 적용한 결과를 다른 방법의 계산결과와 비교하여 그 타당성을 검토하였다. 나아가서 기존의 방법에서 요구되었던 일정한 유효질량의 가정없이 graded gap 초격자에 적용하여 입자의 유효질량의 연속변화에 따른 subband 에너지와 파동함수를 계산하였다.

• 대한기계학회논문집A
• /
• 제26권8호
• /
• pp.1719-1726
• /
• 2002

Design variables and design parameters are rarely deterministic in practice. Robust optimal design takes into consideration of the uncertainties in the design variables and parameters. Robust optimization methodology with probability constraints requires a lot of system analyses fer calculating failure probability of each constraint. By introducing an envelope function to reduce the number of constraints, efficiency of robust optimization techniques can be considerably improved. Through four illustrative examples, it is shown that the number of system analyses is greatly decreased while little differences in the optimum results are observed.

• 대한화장품학회:학술대회논문집
• /
• 대한화장품학회 2003년도 IFSCC Conference Proceeding Book I
• /
• pp.570-577
• /
• 2003

The importance of cornified envelope (CE)-bound lipids to epidermal barrier function is increasingly being recognized. In the present study, we intentionally damaged the cornified layer of hairless mice by ultraviolet irradiation and sodium dodecyl sulfate (SDS) treatment, and assessed the changes in epidermal barrier function by measuring Trans Epidermal Water Loss (TEWL). We also measured changes in the amount of CE-bound lipids using thin layer chromatography (TLC). The results showed that both treatments increased TEWL and decreased CE-bound lipids (omega-hydroxy cerami de and omega-hydroxy acid). In addition, investigation of the chronological changes in TEWL revealed an inverse relationship between TEWL and CE-bound lipids, and a correlation between CE-bound lipids and epidermal barrier function. We then measured the amount of CE-bound lipids in the cheek and the medial side of the upper arm in humans. The results showed that because the cheek receives external stimulation on a daily basis, the amount of CE-bound lipids was significantly lower, while the level of TEWL was higher. These observations, together with those from the animal study, indicate that CE-bound lipids are related to epidermal barrier function.

• 한국산업융합학회 논문집
• /
• 제23권6_2호
• /
• pp.1051-1058
• /
• 2020

The chemical mechanical planarization (CMP) is a process of physically and chemically polishing the semiconductor substrate. The planarization quality of a substrate can be evaluated by the within wafer non-uniformity (WIWNU). In order to improve WIWNU, it is important to manage the pad profile. In this study, a device capable of non-contact measurement of the pad thickness profile was developed. From the measured pad profile, the profile of the pad surface and the groove was extracted using the envelope function, and the pad thickness profile was derived using the difference between each profile. Thickness profiles of various CMP pads were measured using the developed PMS and envelope function. In the case of IC series pads, regardless of the pad wear amount, the envelopes closely follow the pad surface and grooves, making it easy to calculate the pad thickness profile. In the case of the H80 series pad, the pad thickness profile was easy to derive because the pad with a small wear amount did not reveal deep pores on the pad surface. However, the pad with a large wear amount make errors in the lower envelope profile, because there are pores deeper than the grooves. By removing these deep pores through filtering, the pad flatness could be clearly confirmed. Through the developed PMS and the pad thickness profile calculation method using the envelope function, the pad life, the amount of wear and the pad flatness can be easily derived and used for various pad analysis.

• Molecules and Cells
• /
• 제40권5호
• /
• pp.339-345
• /
• 2017

Retroviral and lentiviral vectors are mostly pseudotyped and often purified and concentrated via ultracentrifugation. In this study, we quantified and compared the stabilities of retroviral [murine leukemia virus (MLV)-based] and lentiviral [human immunodeficiency virus (HIV)-1-based] vectors pseudotyped with relatively mechanically stable envelope proteins, vesicular stomatitis virus glycoproteins (VSVGs), and the influenza virus WSN strain envelope proteins against ultracentrifugation. Lentiviral genomic and functional particles were more stable than the corresponding retroviral particles against ultracentrifugation when pseudotyped with VSVGs. However, both retroviral and lentiviral particles were unstable when pseudotyped with the influenza virus WSN strain envelope proteins. Therefore, the stabilities of pseudotyped retroviral and lentiviral vectors against ultracentrifugation process are a function of not only the type of envelope proteins, but also the type of viral internal core (MLV or HIV-1 core). In addition, the fraction of functional viral particles among genomic viral particles greatly varied at times during packaging, depending on the type of envelope proteins used for pseudotyping and the viral internal core.

• 한국안전학회지
• /
• 제25권3호
• /
• pp.1-6
• /
• 2010

Ball bearings are one of main components that support the rotational shaft in high speed rotary machinery. So, it is very important to detect the incipient faults and fault growth of bearing since the damage and failure of bearing can cause a critical failures or accidents of machinery system. In the past, many researchers mainly performed to detect the bearing fault using traditional method such as wavelet, statistics, envelope etc in vibration signals. But study on the detection technique for bearing fault growth has a little been performed. In this paper, we verified the possibility for monitoring of fault growth and detection of fault size in bearing outer-race by using the envelope powerspectrum and probabilistic density function from measured vibration signals.