• 한국인터넷방송통신학회논문지
• /
• 제10권6호
• /
• pp.107-111
• /
• 2010

차량 주행 중에 타이어에서 발생하는 초음파를 이용하여 손상 물질에 의한 타이어의 손상을 검출하는 방법에 대해 연구하였다. 손상이 있는 타이어는 회전 주기성이 있는 초음파 신호가 발생하므로 주기성을 검출하기 위해 포락선 검출 전처리 과정을 거친 후 자기상관함수를 사용하였다. 실험에서는 손상된 타이어의 1회전 시간과 자기상관함수를 이용해 구한 주기가 같은 것으로 나타났다. 이로 인해 타이어의 손상 유무를 분별할 수 있는 결과를 도출하였다.

• 한국통신학회논문지
• /
• 제38A권6호
• /
• pp.512-519
• /
• 2013

본 논문에서는 합성 이진 옵셋 반송파를 (composite binary offset carrier: CBOC) 위한 새로운 비모호 상관함수를 제안한다. 먼저, CBOC 신호의 부반송파를 네 개의 부분 부반송파의 합으로 해석하고, 각 부분 부반송파들과 수신 신호의 부분 상관들을 생성한다. 이후 생성된 부분 상관을 재조합하여 날카로운 주 첨두를 갖는 새로운 비모호 상관함수를 생성한다. 모의실험의 결과로부터 신호 추적에 제안한 상관함수를 이용한 경우 기존 상관함수들을 이용한 경우보다 더욱 향상된 추적 오류 표준편차와 다중 경로 오류 포락선을 가짐을 확인한다.

• 한국해양공학회지
• /
• 제32권3호
• /
• pp.208-212
• /
• 2018

In this paper, we focus on planing avoidance control for a supercavitating underwater vehicle based on the potential function method. The planing margin can be calculated using the relative position between the cavity center and vehicle center at the end of the vehicle. The planing margin was transformed into a limit variable such as the pitch angle and yaw angle limit. To prevent the vehicle attitude from exceeding the limit variable, a potential function based planing envelope protection method was proposed. The planing envelope protection system overrides commands from the tracking controller, and the vehicle attitude converges to a desired angle, in which the potential function is minimized. Numerical simulations were performed to analyze the physical feasibility and performance of the proposed method. The results showed that the proposed methods eliminated the planing, allowing the vehicle to follow tracking commands.

• 터널과지하공간
• /
• 제28권5호
• /
• pp.426-441
• /
• 2018

일반화된 Hoek-Brown (GHB) 파괴조건식은 최근 각종 암반공학적 계산에 활발히 이용되고 있지만 Mohr 파괴포락선이 해석적 수식으로 표시되지 않아 적용범위를 넓히는데 어려움이 있다. 이러한 단점을 극복하기 위해 이 연구에서는 GHB 파괴함수에 내포된 수직응력 - 접선마찰각 관계식을 다항식으로 최적 근사시켜 접선마찰각을 수직응력의 명시적 근사함수로 표시하는 새로운 방법을 제안하였다. 이 수직응력 - 접선마찰각 관계식을 직선 또는 2차 다항식으로 최적 근사시킬 경우 접선마찰각에 대한 해석적 해가 존재한다. 이 해를 전단응력 - 접선마찰각 관계식에 대입하면 GHB 파괴함수의 근사적 Mohr 파괴 포락선을 유도하는 것이 가능하다. 유도한 근사 Mohr 파괴포락선은 GSI 값 전체 범위에서 정해와 매우 근사함이 입증되었다.

• 대한치과보철학회지
• /
• 제57권4호
• /
• pp.467-474
• /
• 2019

최근 들어 치아의 심미적인 개선을 위해 전치부 보철 치료를 하는 경우가 많다. 하지만 전치부 심미 보철치료이후 환자가 발음, 저작 등 기능적으로 불만족스럽게 생각하는 경우가 종종 있다. 전치부는 심미적으로 중요할 뿐만 아니라 교합과 관련하여서도 중심위 다음으로 중요한 전방유도가 성립되는 부분으로, 잘못된 전방유도 설정으로 인해 구치부의 교합간섭을 초래할 수 있다. 또한 새롭게 설정된 전치부 보철물의 전방유도가 환자의 기능로(envelope of function)과 조화를 이루지 않을 시 환자가 불편감을 나타낼 수 있다. 본 증례는 전치부 심미 보철 이후 부정확한 발음 및 안정적인 접촉이 없어서 불안정한 교합, 전반적인 불편감을 호소하는 환자에서 체계적인 진단과 치료과정을 통해 보철물을 재수복하여 환자와 술자 모두에게서 심미적으로, 그리고 기능적으로 만족스러운 결과를 얻었기에 보고하는 바이다.

• Nuclear Engineering and Technology
• /
• 제55권3호
• /
• pp.968-980
• /
• 2023

The dynamic structural responses are sensitive to the time-frequency content of seismic waves, and seismic input motions in time-history analysis are usually required to be compatible with design response spectra according to nuclear codes. In order to generate spectra-compatible input motions while maintaining the intrinsic non-stationarity of seismic waves, an improved time-domain approach is proposed in this paper. To maintain the nonstationary characteristics of the given seismic waves, a new time-frequency envelope function is constructed using the Hilbert amplitude spectrum. Based on the intrinsic mode functions (IMFs) obtained from given seismic waves through variational mode decomposition, a new corrective time history is constructed to locally modify the given seismic waves. The proposed corrective time history and time-frequency envelope function are unique for each earthquake records as they are extracted from the given seismic waves. In addition, a dimension reduction iterative technique is presented herein to simultaneously superimpose corrective time histories of all the damping ratios at a specific frequency in the time domain according to optimal weights, which are found by the genetic algorithm (GA). Examples are presented to show the capability of the proposed approach in generating spectra-compatible time histories, especially in maintaining the nonstationary characteristics of seismic records. And numerical results reveal that the modified time histories generated by the proposed method can obtain similar dynamic behaviors of AP1000 nuclear power plant with the natural seismic records. Thus, the proposed method can be efficiently used in the design practices.

• 전산구조공학
• /
• 제5권3호
• /
• pp.127-137
• /
• 1992

해양 가이드 타워를 대상으로 하여 지진하중에 대한 심해용 구조물의 비정상 거동해법에 대하여 연구하였다. 지반운동의 비정상 특성을 정상과정 성분에 시간포락함수가 곱해진 형태로 모형화하였으며, 구조물의 비정상 거동은 시간종속 분산함수로 구하였다. 지진의 시간포락함수와 정상과정 성분의 자기상관함수를 지수함수로 수식화하여 나타냄으로써, 구조물 거동의 시간종속 분산값을 해석적인 방법으로 구할 수 있는 기법을 개발하였다. 시간에 따른 거동의 분산값을 기본자료로 하여 지진의 발생기간 동안 예상되는 최대거동을 구하였으며, 이 값을 구조물 거동을 정상과정으로 가정하여 산정한 결과와 비교 분석하였다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1999년도 추계학술대회 논문집 학회본부 B
• /
• pp.512-514
• /
• 1999

The damping ratio $\zeta$ of a continuous 2nd order response which passes all the points of the discrete response of a 2nd order discrete system(envelope curve) is a function of only the location of the closed-loop pole and ie not at all related to the location of the zero. And the peak overshoot of the envelope curve is uniquely specified by the damping ratio $\zeta$, which is a function of solely the closed-loop pole location, and the angle $\alpha$ which is determined by the relative location of the zero with respect to the closed-loop complex pole. Therefore, if the zero slides on the real axis with the closed-loop complex poles being fixed, then the angle $\alpha$ changes however the damping ratio $\zeta$ does not. Accordingly, when the closed-loop system poles are fixed, the peak overshoot is function of $\alpha$ or the system zero. In this thesis the effects of the relative location of the zero on the system performance of a second order discrete system is studied.

• 한국실내디자인학회논문집
• /
• 제22권1호
• /
• pp.11-18
• /
• 2013

The Contemporary consumer society demands companies to emphasize more on the brand marketing that can deliver the brand identities distinguished from those of competing companies. In today's environment, the meaning of consumption is not only a simple purchase of a product, but also assimilation into images, experience and emotional aspects of the brand. The flagship stores of brands take the advantage of the tendency seriously and utilize the envelopes of the building as marketing catalysts to establish their brand identities. This paper aims to investigate the possibility of the architectural envelope as a marketing element to establish the brand identities, by analyzing the design techniques that enhance the visual effects utilizing innovative application of material, pattern and connection details. it is studied that the function of architectural envelope's change from past to recent date and role of architectural envelope as means of marketing for expression brand image in contemporary commerce space and elements that can be applied on architectural envelope with theoretical consideration about marketing and brand identity. Also this paper will research about experience elements because the process for consumers to recognize brand image with architecture is the process of visual experience. And through example research, this paper will study interrelationship between visual system of cognition to be expressed on architectural envelope.

• 대한건축학회논문집:계획계
• /
• 제35권8호
• /
• pp.23-34
• /
• 2019

The façade, a fundamental function as a skin that protects human life from external environment such as cold and hot weather, snow, rain, and wind, etc, has served as a media for communication between indoor space of the building and outside space. From the media for communication point of view, the approach to envelope design, in which environmental elements are transmitted internally through the filtering of external environments, has been evolving in various ways from the past to the present. Today, modern architecture technologies including curtain wall systems and user-friendly computer programming and environmental analysis programs demonstrate a differentiated approach to envelope design related to the indoor environment. For this reason, it is worth noting that the envelope design factors and trends that appear variously in the UNStudio's projects before and after the 2000s. The factors reflected in the envelop design in conjunction with the indoor environment obtained through the case study of the UNStudio's office projects were daylight environment, thermal environment, ventilation, noise, privacy and view, and consideration for daylight environment and thermal environment was reflected in many cases through the case study. Looking at the changes in the diagrams in order of year, it can be seen that the envelope design using the environmental analysis tool has been performed since 2006. This is a clue to show the envelop design changes from the conceptual method to the data-based one. The diagrams and analysis results related to the envelop design showed that the thermal environment related to solar radiation was the most, and no diagrams and analysis related to the indoor illumination were found. Since 2010, PV panel installation has been shown in the envelope design, which can be found in the increased efficiency of PV panels due to the technological advances and the decrease in production cost.