• Journal of electromagnetic engineering and science
• /
• 제12권1호
• /
• pp.32-36
• /
• 2012

In this paper, we present a novel algorithm for detecting a bonded channel in a cognitive radio network where channel bonding is allowed for a higher data rate. The envelope detection algorithm is proposed to distinguish the center frequency of the received signal in order to determine whether the signal is transmitted by a primary user occupying a single channel or a secondary user occupying more than two channels when the channel is in use.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2007년도 춘계학술대회논문집
• /
• pp.319-323
• /
• 2007

Acoustic emission (AE) was originally developed for non-destructive testing of static structure, but over the year its application has been extended to health monitoring of rotating machines and bearings. It offers the advantage of earlier defect detection in comparison with monitoring bearing. This study was diagnosed low-speed machine which had a fault bearing for early detection by AE. And the artificial faults in a experimentation bearing was made for the bearing signals from difference speed and load were compared and analyzed by AE.

• 한국생산제조학회지
• /
• 제8권6호
• /
• pp.105-112
• /
• 1999

In this paper we deal with tool interference problem in the case of compound surface machining. A new tool interference detection and correction method based on the envelope of the tool path is suggested to identify and correct the tool interference - not only within the local path of tool movement, but also outside of the tool path. Therefore, the developed strategy can be used to check the possible interference in any region of the surface. In order to analyze quantitatively the milled surface error produced by the tool interference, improved surface prediction model is also suggested in cutting process by general cutters. The effectiveness of the proposed method is demonstrated through simulation study.

• 한국군사과학기술학회지
• /
• 제7권3호
• /
• pp.93-100
• /
• 2004

In this paper, we describe the design, fabrication, and test results of a W-band FMCW radar for the metal target detection under the ground clutter environment. In order to detect metal targets on the ground, we used a single cassegrain antenna with the beamwidth of $1.45^{\circ}$ which forms pencil-beam footprint on the ground. A log envelope detector was applied to improve radar performance in the severe ground clutter known as Weibull and log normal clutter. The designed FMCW radar can acquire altitude information from the ground clutter with $\sigma_0=-23dB$ at the height of 160m. The fabricated W-band FMCW radar transmits 11 dBm power and the dynamic range of the receiver is from -106dBm to -30dBm. The performances of the fabricated sensors were tested out in the fields and detected a car target of 200m apart on the grass.

• 대한의용생체공학회:학술대회논문집
• /
• 대한의용생체공학회 1991년도 추계학술대회
• /
• pp.79-82
• /
• 1991

Digital FHR monitoring system based on the personal computer combined wi th the digital signal processing (DSP) board was implemented. The DSP board acquires and digitally processes ultrasound fetal Doppler signal for digital rectification, envelope detection, autocorrealtion function calculation and its peak position detection. The personal computer interfaced with the DSP board is in charge of graphic display, hardcopy, data taransmission and on-line analysis of fetal heart rate change including on-line warning system, base-line estmation, acceleration, deceleration and variability. The advantages of PC-DSP based system can be summarized as follows: 1) Minimum hardware realization. 2) Increased flexibility. 3) Total care system.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2011년도 춘계학술대회 논문집
• /
• pp.582-587
• /
• 2011

Acoustic Emission(AE) is widely used for early detection of faults for rotating machinery in these days because of its high sensitivity. AE signal has to need for transferring to low frequency range for the spectrum analysis included the fault mechanism. In transferring process, we lose a lot of fault information caused by unusable signal processing method. Discrete Wavelet Transform(DWT) is a method of signal processing for AE signatures, but the pattern of its mother function is not optimized with AE signals. So, we can lose the fault information when we want to use the DWT for AE signal. Therefore, in this paper, we will propose a novel pattern for DWT mother function, which is optimized with AE signals. And it will be applied to compare the results of DWT by daubechie and novel pattern.

• 한국군사과학기술학회지
• /
• 제13권1호
• /
• pp.30-35
• /
• 2010

As of today, Frequency Hopping techniques are widely used for over-channel interference and anti-jamming communication systems. In this paper, analysis the performance of robustness on the focus of some general jamming channel. In FH/SS systems, usually SFH(Slow Frequency Hopping) and FFH(Fast Frequency Hopping) are took up on many special communication systems, the SFH, FFH are also combined with a channel diversity algorithm likes NED(Normalized Envelop Detection), EGC(Equal Gain Combines) and Clipped Combines to overcome jammer's attack. This paper propose Adaptive-NED and shows A-NED will be worked well than the others in the some general jamming environments.

• 한국통신학회논문지
• /
• 제28권10A호
• /
• pp.807-815
• /
• 2003

MultiCode-CDMA(MC-CDMA) 시스템은 채널수가 증가할수록 신호의 PAPR(Peak to Average Power Ratio)이 증가하게 되어 증폭기의 비선형 특성에 의해 시스템 성능이 열화된다. MultiPhase Clipped MultiCode CDMA(MP-CDMA)[1] 시스템은 이러한 증폭기의 비선형 특성에 의한 시스템 성능 열화를 상쇄한다. 본 논문에서는 변조방식을 MPSK가 아닌 차동 부호화된 MPSK 방식을 사용했고 이렇게 변형된 시스템을 DMP-CDMA 시스템이라고 부를것이다. 차동 검출 방식을 적용한 DMP-CDMA 시스템은 위상 보정을 위한 모듈이 필요없고, 파일럿(pilot) 신호를 위한 추가적인 데이터 전송이 필요 없다는 장점을 가진다. 그러나 동기 검출을 사용한 시스템에 비해서 약 4.0dB의 성능열화를 보인다. 차동 검출 방식을 사용한 DMP-CDMA 시스템의 성능 열화를 보상하기 위해서 다중 심볼 차동 검출 방식을 적용한 결과 차동 검출 방식에 비해서 약 3.6dH의 성능 개선 효과를 보았다.

• 대한인간공학회지
• /
• 제34권4호
• /
• pp.313-326
• /
• 2015

Objective: The objective of this research is to quantitatively analyze muscle activities of arm and shoulder, according to direction in various types of one-handed manual material handling, based on surface electromyography. Background: Workers in industrial sites frequently carry out one-handed manual material handling using arm and shoulder muscles. Therefore, chronic load and accumulated fatigue occur to arm and shoulder muscles, which becomes a main cause of upper arm and shoulder musculoskeletal disorders. The shoulder muscles have widely range of motion, and complex interactions take place among various muscles including rotator cuff muscles. In this regard, research on interactions among should muscles, according to such various dynamic motions, is required. Method: Ten male subjects in their 20s participated in this research. This research considered upward, downward, leftward, rightward, forward and backward directions and fourteen muscles around arm and shoulder (biceps brachii and trapezius, etc.) as independent variables. The mean muscle activity was set as the dependent variable. This research extracted $4^{th}{\sim}7^{th}$ repetition signals according to ten times of repetitive muscle contraction, and analyzed the muscle activity concerned using the envelope detection technique. Results: The mean muscle activity of upward direction was analyzed highly statistically significant. The reason is that the effect of gravity works to arm and shoulder muscles. Also, it is conjectured that deformation of coracoacromial ligament was caused, and its contact pressure increased, due mainly to the shoulder flexion, and therefore load was analyzed high. Muscle activity was analyzed significantly low, according to concentric ballistic motion used in the concentric contraction phase by storing elastic energy in the eccentric contraction phase with a motion to bring the weight to the front of subject's body as to downward, leftward and backward directions. Because, elbow joint's flexion-extension motions mainly occurred, biceps brachii was analyzed high muscle activity as the prime mover. Conclusion: The information on the quantitative load of muscles can be applied to ergonomic work design for one-handed manual material handling to minimize muscle load. Application: This research has effectively identified muscle activity according to dynamic contraction by applying an envelope detection technique. The results can be used for ergonomic work design to minimize muscle load during the one-handed manual material handling, according to each direction. The research results are expected to be used for musculoskeletal disorder prevention and physiotherapy in the rehabilitation medical field, based on the muscle load of arm and shoulder in various directions.

• 한국통신학회논문지
• /
• 제16권5호
• /
• pp.413-423
• /
• 1991

3RC, 3SRC, 4SRC, TFM등과 같은 몇몇 디지틀 PRCPM 신호는 정 진폭 특성과 밀집된(Compact) 전력 스펙트럼을 갖는다. 그러나 페이딩하에서 단순한 주파수 검파를 사용했을 때 이들의 BER은 너무 높다. 이는 근접 비트들 때문에 생기는 높은 ISI에 기인한다. 본 논문에서는 하나의 근접 비트 때문에 생기는 ISI 재기를 위해 DFE(Decision Feedback Equalization)을 사용하였고, 이때의 BER 성능 향상을 이론적으로 살펴보았다. 또한, DEF를 사용한 경우와 사용하지 않은 경우의 BER 성능 비교를 위해 수치 결과들을 제시하였다.