• 한국안광학회지
• /
• 제15권1호
• /
• pp.31-38
• /
• 2010

목적: 본 논문에서는 안경원의 진입 규제 완화에 대한 공정거래위원회 보고서의 문제점과 개선방안들을 다루었다. 방법: 안경업 진입규제완화를 주장하는 공정거래위원회 보고서 각각의 내용을 분석하였다. 결과: 안경사와 안경원의 공급은 현재도 과포화 상태이며, 외국사례의 경우는 우리의 현실과 맞지 않는다. 정책을 실행하기 위해서는 무엇보다도 제도 개선이 선행되어야 한다. 그리고 안경사들과 정부를 다 만족시키기 위해서는 신중을 요하는 균형이 잡힌 조치가 필요하다. 결론: 현 시점에서 규제완화정책을 실행하기에는 시기상조이며, 장기적인 관점에서 보아야 한다.

• Journal of Astronomy and Space Sciences
• /
• 제29권4호
• /
• pp.363-374
• /
• 2012

This paper studies the problem of tracking a re-entry vehicle (RV) in order to predict its impact point on the ground. Re-entry target dynamics combined with super-high speed has a complex non-linearity due to ballistic coefficient variations. However, it is difficult to construct a database for the ballistic coefficient of a unknown vehicle for a wide range of variations, thus the reliability of target tracking performance cannot be guaranteed if accurate ballistic coefficient estimation is not achieved. Various techniques for ballistic coefficient estimation have been previously proposed, but limitations exist for the estimation of non-linear parts accurately without obtaining prior information. In this paper we propose the ballistic coefficient ${\beta}$ model-based interacting multiple model-extended Kalman filter (${\beta}$-IMM-EKF) for precise tracking of an RV. To evaluate the performance, other ballistic coefficient model based filters, which are gamma augmented filter, gamma bootstrapped filter were compared and assessed with the proposed ${\beta}$-IMM-EKF for precise tracking of an RV.

• 대한인간공학회지
• /
• 제36권5호
• /
• pp.355-372
• /
• 2017

Objective: The aim of this study is to investigate the performance and usability of ten-finger text entry on Tablet PCs. Background: Generally a soft keyboard is used on Tablet PCs. However, the soft keyboard's performance is usually worse than physical keyboard's performance. In this study, we proposed a modified keyboard for tablet PCs to improve the performance of ten-finger text entry and evaluated the performance and subjective ratings of the keyboard. Method: The modified soft keyboard that is suggested in this study was compared with current Google and Samsung soft keyboards on Tablet PCs. Results: The three keyboards were not significantly different in terms of typing speed, error rate, and mental workload and showed bad performance. Also, the subjective ratings were not shown positively. Conclusion: Based on our results, ten-finger text entry using soft keyboards on Tablet PCs seems to be very difficult. However, we need to research the possibility continuously since ten-finger text entry can improve typing speed. Application: Our study can be a starting point of research that explores ten-finger text entry on Tablet PCs. The new soft keyboard design can be one of the soft keyboard alternatives. However, the key factors to improve the performance and usability of the soft keyboard will not be 'key size' or 'convenience to typing special characters or numbers', but other factors (e.g., 'tactile feedback').

• 한국군사과학기술학회지
• /
• 제20권2호
• /
• pp.217-224
• /
• 2017

This study proposes an evaluation method for time delay function(TDF) of Point Detonation(PD) fuse using underwater explosion and water entry phenomena. Until now, nothing but the naked eyes of an observer or video images have been used to determine whether the TDF of PD fuze is operated or not. The observer has verified the performance of TDF by analysing the shape of the plume formed by underwater explosion. However, it is very difficult to evaluate the TDF of PD fuse by these conventional methods. In order to overcome this issue, we propose a method using underwater sound signal emitted from the underwater explosion of high explosive charge. The result shows that the measured sound signal is in accord with the physical phenomena of water entry of warhead as well as underwater explosion. Also, from the hypothesis test of bubble period, difference on underwater sound analysis between dud event and delay one is proved.

• Journal of Korean Neurosurgical Society
• /
• 제56권1호
• /
• pp.5-10
• /
• 2014

Objective : When the pedicle screw insertion technique is failed or not applicable, C7 intralaminar screw insertion method has been used as an alternative or salvage fixation method recently. However, profound understanding of anatomy is required for safe application of the bilaterally crossing laminar screw at C7 in clinic. In this cadaveric study, we evaluated the anatomic feasibility of the bilateral crossing intralaminar screw insertion and especially focused on determination of proper screw entry point. Methods : The C7 vertebrae from 18 adult specimens were studied. Morphometric measurements of the mid-laminar height, the minimum laminar thickness, the maximal screw length, and spino-laminar angle were performed and cross-sectioned vertically at the screw entry point (spino-laminar junction). The sectioned surface was equally divided into 3 parts and maximal thickness and surface area of the parts were measured. All measurements were obtained bilaterally. Results : The mean mid-laminar height was 13.7 mm, mean minimal laminar thickness was 6.6 mm, mean maximal screw length was 24.6 mm, and mean spinolaminar angle was $50.8{\pm}4.7^{\circ}$. Based on the measured laminar thickness, the feasibility of 3.5 mm diameter intralaminar screw application was 83.3% (30 sides laminae out of total 36) when assuming a tolerance of 1 mm on each side. Cross-sectional measurement results showed that the mean maximal thickness of upper, middle, and lower thirds was 5.0 mm, 7.5 mm, and 7.3 mm, respectively, and mean surface area for each part was $21.2mm^2$, $46.8mm^2$, and $34.7mm^2$, respectively. Fourteen (38.9%) sides of laminae would be feasible for 3.5 mm intralaminar screw insertion when upper thirds of C7 spino-laminar junction is the screw entry point. In case of middle and lower thirds of C7 spino-laminar junction, 32 (88.9%) and 28 (77.8%) sides of laminae were feasible for 3.5 mm screw insertion, respectively. Conclusion : The vertical cross-sectioned area of middle thirds at C7 spinolaminar junction was the largest area and 3.5 mm screw can be accommodated with 77.8 % of feasibility when lower thirds were the screw entry point. Thus, selection of middle and lower thirds for each side of screw entry point in spino-laminar junction would be the safest way to place bilateral crossing laminar screw within the entire lamina. This anatomic study result will help surgeons to place the screw safely and accurately.

• 기술혁신학회지
• /
• 제18권2호
• /
• pp.338-357
• /
• 2015

본 연구에서는 고용노동부의 '임금구조기본통계조사'와 '고용형태별근로실태조사 보고서'를 정량적으로 분석하여 지식기반경제로의 진입 시점에 대한 실증적 연구를 제시하고자 한다. 지식기반경제로의 진입 기준은 Bell과 Toffler의 정의를 통해, 정신노동자 수가 육체노동자 수를 능가하는 시점으로 정하였으며, 정신노동자를 지식정보직으로 분류하였다. Porat의 지식정보직 정의로부터 한국표준직업분류표상의 직업들을 지식정보직, 서비스직, 제조업직, 농어업산림직으로 직업분류를 수행하였다. 분석 결과 지식정보직의 노동자 수 구조변화와 연간임금액 구조변화를 통해 지식정보사회의 진입 시점이 1980년인 미국보다 20년 늦은 2000년임을 실증적으로 확인했다. 또한, 지식기반경 제에서의 직업분류별 경제기여도를 측정하여 지식정보직의 직업분류별 경제기여도가 가장 큰 것을 확인하였다.

• 대한화상학회지
• /
• 제22권2호
• /
• pp.58-65
• /
• 2019

Wound caused by high-tension electrical burns is difficult to manage because the wound is deep and complex. The wound is progressively necrotic due to microvascular injury resulting in deep tissue exposure. So, coverage of the wound at the entry point and the exit point is cumbersome, often requiring flap coverage. We experienced a case of one patient for peroneal artery perforator free flap coverage on the palm of the right hand of the entry point of electrical burn. The left foot wound of electrical exit point was covered by full thickness skin graft. Also a small wound was on the left side of the lower back was the exit point of electrical burn. The lower back wound was healed and recurred repeatedly after burn. On postburn day 6 month, through the radiologic exam, metal shadow was identified in the left gluteus muscle forming chronic sinus. We explored the wound of sinus and a foreign body was identified in the sac as multi braid wires thin as hair. According to the patient's past history, we suspected that the back wound was caused by electrical burn injury through the wires.

• International Journal of Ocean System Engineering
• /
• 제2권1호
• /
• pp.32-36
• /
• 2012

This paper presents a comparison of potential and viscous computational codes for the water entry problem. A po-tential code was developed which adopted the boundary element method to solve the problem. A nonlinear free surface boundary condition was integrated to find new locations of free surface. The dynamic boundary condition was simplified by taking constant potential values for every time steps. The simplified dynamic boundary condition was applied in the new position of the free surface not at the mean level, which is the usual practice for linearized theory. The commercial code FLUENT was used to solve the water entry problem from the viscosity point of view. The movement of the air-liquid interface is traced by distribution of the volume fraction of water in a computational cell. The pressure coefficients were compared with each other, while experimental results published by other researchers were also examined. The characteristics of each method were discussed to clarify merits and limitations when they were applied to the water entry problems.

• Journal of Korean Neurosurgical Society
• /
• 제54권1호
• /
• pp.25-29
• /
• 2013

Objective : To clarify the landmark for deciding the entry point for C1 lateral mass screws via the posterior arch by using 3-dimensional (3D) computed images. Methods : Resnick insisted that the C1 posterior arch could be divided into pure posterior and lateral lamina (C1 pedicle). Authors studied where this transition point (TP) is located between the posterior lamina and the C1 pedicle and how it can be recognized. The 3D computed images of 86 cadaver C1s (M : F=45 : 41) were used in this study. Results : The superior ridge of the C1 posterior arch had 2 types of orientation. One was in the vertical direction in the C1 posterior lamina and the other was in the horizontal direction in the C1 pedicle. The TP was located at the border between the 2 areas, the same site as the posterior end of the groove of the vertebral artery. On posterior-anterior projection, the posterior arch was sharpened abruptly at TP. We were unable to identify the TP in 6.4% of specimens due to complete or partial osseous bridges. A total of 93.8% of the TP were located between the most enlarged point of the spinal canal and the medial wall of the vertebral artery. Conclusion : The anatomic entry zone of C1 lateral laminar screws was clarified and identified based on the TP by using preoperative 3D computed images.

• Advances in materials Research
• /
• 제11권4호
• /
• pp.375-390
• /
• 2022

Carbon Fiber Reinforced Polymer (CFRP) composite provides outstanding mechanical capabilities and is therefore popular in the automotive and aerospace industries. Drilling is a common final production technique for composite laminates however, drilling high-strength composite laminates is extremely complex and challenging. The delamination of composites during the drilling at the entry and exit of the hole has a severe impact on the results of the holes surface and the material properties. The major goal of this research is to investigate contemporary industry solutions for drilling CFRP composites: enhanced edge geometries of cutting tools. This study examined the occurrence of delamination at the entry and exit of the hole during the drilling. For each of the 80°, 90°, and 118°point angle uncoated Brad point, Dagger, and Twist solid carbide drills, Taguchi design of experiments were undertaken. Cutting parameters included three variable cutting speeds (100-125-150 m/min) and feed rates (0.1-0.2-0.3 mm/rev). Brad point drills induced less delamination than dagger and twist drills, according to the research, and the best cutting parameters were found to be a combination of maximum cutting speed, minimum feed rate, and low drill point angle (V:150 m/min, f: 0.1 mm/rev, θ: 80°). The feed rate was determined to be the most efficient factor in preventing hole entry and exit delamination using analysis of variance (ANOVA). Regression analysis was used to create first-degree mathematical models for each cutting tool's entrance and exit delamination components. The results of optimization, mathematical modelling, and experimental tests are thought to be reasonably coherent based on the information obtained.