• Journal of the Architectural Institute of Korea Structure & Construction
• /
• v.35 no.7
• /
• pp.139-146
• /
• 2019

This study examined the effect of various arrangement methods for forming peripheral closed hoops in the jacket section on the axial behavior of section enlargement strengthening columns. Four types of peripheral closed hoops arranged in the jacket section were prepared as follows: 1) Closed connection of prefabricated bar units (column P); 2) V-clip installation across the overlapped legs of channel-type bars (column V); 3) Use of glass fiber mesh for an alternative of steel bars (column F); and 4) combination of prefabricated bar units and glass fiber mesh (column PF). The V-clip is designed to form the closed hoops in the jacket section using the overlapped channel-type bars, preventing the opening of the channel bar legs. The glass fiber mesh is to examine the feasibility to apply for closed hoops in the jacket section as an alternative for steel bars, considering the easy construction. In the jacket section of all the strengthened columns, V-ties were arranged for supplementary ties, avoiding the interruption of the existing column. The axial stiffness and strength of the strengthened columns were insignificantly affected by the arrangement methods of closed hoops in the jacket section. The axial ductility ratio of the strengthened columns P, V, and PF was enhanced more than twice of that measured in the non-seismic existing column. However, the column F exhibited a lower ductility than the other strengthened columns because of the fracture of the mesh at the ultimate strength of the column. The V-clip approach was favorable to enhance the ductility of the strengthened column, preventing the opening of the legs of channel-type bars.

• Korean Journal of Medicinal Crop Science
• /
• v.4 no.4
• /
• pp.301-307
• /
• 1996

The experiment was conducted to clarify the effect of water stress treatment on growth character of Ligusticum chuanxiong Hort. The water stress treatment was imposed artificially on seedling, flowering and rhizome enlargement stage of the plant. The decrease ratio of leaf area compare with control decreased to 24.4% by water stress treatment at seedling stage and to 41.6% at rhizome enlargement stage. The reduction rate of chlorophyll content at the end of water stress treatment was 41.2% at the see­dling stage and no difference at the flowering stage. The chlorophyll content of water stress treatment on seedling and flowering stage was recovered to 95% at harvest time. The ratio of rootlet distribution from top soil to l0cm depth showed maximum to 90% at the seedling stage and to 20cm depth showed max­imum to 6.4% at the rhizome enlargement stage. The dry weight of rootlet was decreased to $19.3{\sim}40.3%$ by water stress treatment. Dry weight of aerial part and underground part of the plant decreased in the order of seedling, flowering, rhizome enlargement and control and the dry weight of aerial part decrease more severely than underground part.

• Korean Journal of Plant Resources
• /
• v.18 no.1
• /
• pp.161-168
• /
• 2005

Tuber yield and content of general component and diosgenin which is a main bioactive property were investigated in order to determine the growth characteristics of round typed yam(Dioscorea opposita L.) and the potential of artificial culture at Suwon, Korea. Tubers of round yam were initiated to form at 60 days after planting and then enlargement of tubers lasted by 160 days after planting. Compared to short typed yam(108g), tuber weight of round yam was higher(127g) on the basis of dry weight at 200 days after planting. In comparison of general component between round yam and short yam, protein of round yam$(3.62\%)$ was higher than short yam$(2.10\%)$. Water content in round yam$(64.5\%)$ was lower in short yam$(79.4\%)$, indicating a higher dry weight ratio of round yam. Hardness of round yam was 2787.6 while short yam showed about two times higher hardness(4946.9). Lightness was higher in round yam(77.4). In tuber extracts analysis, diosgenin content was respectively $3.32\%$ in round yam and $2.61\%$ in short yam.

• Journal of Practical Agriculture & Fisheries Research
• /
• v.6 no.1
• /
• pp.50-62
• /
• 2004

Tuber yield and content of general component and diosgenin which is a main bioactive property were investigated in order to determine the growth characteristics of round typed yam(Dioscorea opposita L.) and the potential of artificial culture at Suwon, Korea. Tubers of round yam was initiated to form at 60 days after planting and then enlargement of tubers lasted by 160 days after planting. Compared to short typed yam(108g), tuber weight of round yam was higher(127g) on the basis of dry weight at 200 days after planting. In comparison of general component between round yam and short yam, protein of round yam(3.62%) was higher than short yam(2.10%). Water content in round yam(64.5%) was lower in short yam(79.4%), indicating a higher dry weight ratio of round yam. Hardness of round yam was 2787.6 while short yam showed about two times higher hardness(4946.9). Lightness was higher in round yam(77.4). In tuber extracts analysis, diosgenin content was respectively 3.32% in round yam and 2.61% in short yam.

• Korean Journal of Environmental Biology
• /
• v.39 no.4
• /
• pp.486-494
• /
• 2021

Watermelon (Citrullus lanatus (Thunb.) Matsum. & Nakai) is sensitive to low temperature and shows retarded growth under 10℃. Although early transplanting guarantees higher returns, it requires cost and labor to maintain the appropriate temperature for plant growth. Therefore, cultivars tolerant to chilling stress is necessary to reduce the cost and labor requirements. The purpose of this study is to analyze data on plant growth and fruit enlargement under continuous chilling night temperature to develop new cultivars tolerant to chilling temperature. Two cultivars expected to have chilling tolerance and another cultivar sensitive to chilling temperature were grown in greenhouses with chilling and optimal night temperature conditions. In the early growth stage after transplanting, the cultivars expected to have chilling tolerance showed better vine length, fresh weight and dry weight. However, one of the tolerant cultivars showed significantly lower vine length, leaf length and width, and petiole length than the sensitive cultivar during pollination period and later growth stage, showing genotype specific responses. The fruit length, width, and weight were also significantly lower in the tolerant cultivar. The fruit set ratio was significantly higher in the chilling sensitive cultivar than the two tolerant cultivars. These results suggest that the present chilling tolerant cultivars in watermelon were selected based on their performance in the early growth stage, and further studies on chilling tolerance in different growth and development stages are required to develop cultivars adapted to various forcing cultivation systems.

• Korean Journal of Organic Agriculture
• /
• v.18 no.3
• /
• pp.331-345
• /
• 2010

The objective of this paper is to analyze management performance of organic farming management organizations in the large-scale environment-friendly agricultural districts, focusing on cases of organic farming organizations in Chungnam Asan city and Gyeongnam Sancheong-gun which are leading regions in Korean organic agriculture. The management performance in Asan Organic Farming Organization showed that ratio of operating gain to revenue in 2008~2009 increased by 1.2% point compared to in 2006~2007. The management performance in Sancheong Organic Farming Organization showed revenue gain by KRW 2 million in 2009 whereas it suffered a loss by KRW 24 million in 2008. The management performances implied that the amount of financial performance was not yet large and would be a symbol for soundly developing organic farming organization. This paper suggested that network system, recycling agriculture, and the enlargement of processing industry would be very useful to maximize synergy effect in organic farming organizations in a large-scale environment-friendly agricultural districts.

• Clinics in Shoulder and Elbow
• /
• v.21 no.3
• /
• pp.134-137
• /
• 2018

Background: In a previous study undertaken to quantify capsular volume in rotator cuff interval or axillary pouch, significant differences were found between controls and patients with instability. However, the results obtained were derived from two-dimensional cross sectional areas. In our study, we sought correlation between three-dimensional (3D) capsular volumes, as measured by magnetic resonance arthrography (MRA), and multidirectional instability (MDI) of the shoulder. Methods: The MRAs of 21 patients with MDI of the shoulder and 16 control cases with no instability were retrospectively reviewed. Capsular areas determined by MRA were translated into 3D volumes using 3D software Mimics ver. 16 (Materilise, Leuven, Belgium), and glenoid surface area was measured in axial and coronal MRA views. Then, the ratio between capsular volume and glenoid surface area was calculated, and evaluated with control group. Results: The ratio between 3D capsular volume and glenoid surface area was significantly increased in the MDI group ($3.59{\pm}0.83cm^3/cm^2$) compared to the control group ($2.53{\pm}0.62cm^3/cm^2$) (p<0.01). Conclusions: From these results, we could support that capsular volume enlargement play an important role in MDI of the shoulder using volume measurement.

• Journal of Fashion Business
• /
• v.21 no.2
• /
• pp.61-77
• /
• 2017

Although three-dimensional measurement systems for the human body have been studied, there is still an error between the measurements by the two-dimensional measurement method and the three-dimensional scanning method. Especially, in the case of the breast, the outline is not clear. The breast is made up of subcutaneous fat and mammary gland tissue, and it is easy to deform, making it difficult to grasp the exact shape. It is also more difficult to measure photogrammetry or three-dimensional measurement because it is difficult to obtain subjects because of the shame they are reluctant to expose. In this study, the angle and length of the line connecting the measurement points of the breast detail measurement items were compared with the unchanged measurement items such as breast width and center front length using the frontal and lateral photographs taken before and after breast enlargement surgery. The results of the study are as follows. The types of breast before and after surgery were classified into two groups and showed high accuracy rate. Therefore, it was possible to classify the breast type using the frontal and lateral views of the breast, and it was found that The PRM method can distinguish the characteristics of the breast type. Therefore, it can be useful for classifying and discriminating breast types.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2005.05b
• /
• pp.29-32
• /
• 2005

In this study, the experiment was carried out to investigate and analyze the strenth properties and flowability of ultra-high strength concrete accroding to types of mineral admixtures. The main experimental variables were water/binder ratio 25.0, 27.5 and 30.0$\%$, water content 155, 160, 165, and 170kg/$m^{3}$ and mineral admixtures such as fly ash, silica fume and meta kaolin. According to the test results, the principle conclusions are summarized as follows. 1) In case of using admixtures, superplasticizer amount need more than plain concrete. 2) According to kinds of admixtures, the viscosity of concrete show much difference. 3) The compressive strength of concrete that use admixtures becomes low in early-age strength, but appeared by higher than plain concrete in long-term strength. 4) Meta kaolin is excellent in side but has viscosity enlargement efficiency a little. But, problem estimates that is not to make design strength 600 and 700kgf/$cm^{2}$ if use mixing condition with water-binder ratio properly.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2004.11a
• /
• pp.261-264
• /
• 2004

In this study, the experiment was carried out to investigate and analyze the strenth properties and flowability of ultra-high strength concrete accroding to types of mineral admixtures and cements. The main experimental variables were water/binder ratio $25.0\%$, water content $160kg/m^3$ and mineral admixtures such as fly ash, silica fume and meta kaolin. According to the test results, the principle conclusions are summarized as follows 1) In case of using admixtures, superplasticizer amount need more than plain concrete. 2) According to kinds of admixtures and cements, the viscosity of concrete show much difference. 3) The autogeneous shrinkage of ultra-high strength concrete is profitable that use admixture, and heat of hydration is desirable that apply considering countermeasure enough in the advance. 4) Meta kaolin is excellent in side but has viscosity enlargement efficiency a little. But, problem estimates that is not to make design strength to and $70N/mm^2$ if use mixing condition with water-binder ratio properly.