• IE interfaces
• /
• v.15 no.1
• /
• pp.20-25
• /
• 2002

In this research, a nameplate engraving system for images and texts downloaded through Internet on nameplate is developed. The system consists of two subsystems: thinning algorithm and NC code generation module. In the thinning algorithm, the concept of connectivity is used and center lines of images and texts, which will be used as NC tool paths, can be obtained successfully. Because the center lines are composed of a lot of pixels, NC code would be too long. In the NC code generation module, many useless pixel data are removed and linear interpolation algorithm is applied to only the remaining pixels. By performing actual experiments, the thinning algorithm and the NC code generation module are verified.

• Journal of Korean Library and Information Science Society
• /
• v.39 no.2
• /
• pp.29-37
• /
• 2008

The writer of this study analyzed the traces that are made by revising and replenishing after finishing engraving of Chojodaejanggyeong into the Vol.60 Abstract of Tripitaka Koreans 周本 Hwayemgyeong. It can be a clue that proves the revising of Chojodaejanggyeong was considerably complete.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2003.06a
• /
• pp.1772-1775
• /
• 2003

The stiffness of multi-articulated industrial robots is very weak, because their structure is an articulated type with some links and joints. Thus it is known that cutting processes for metals are not accepted in machine shop well, but they have a lot of merits for cutting processes, for example. drilling, tapping. and engraving etc., because of the characteristics of their high degree of freedom. The temptation of cutting aluminium was carried out to investigate the feasibility and the limitations or constrains for cutting metals on them. First the mode shapes of 6-axes FANUC welding robot were taken and analysed, and next the cutting processes were practically carried out on it. The results of study were found out to show the feasibility of cutting processes at end-milling under 6mm of tool diameter. as well as to have some limitations and constrains, for examples, surface roughness and feed rate, depth of cut, cutting force etc..

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1996.04a
• /
• pp.574-580
• /
• 1996

The objective of the research is to automate the process of making screen for textile printing. Conventional process give rise to the trouble of high cost, long development period, pollution and etc. The automatized system using laser would give the competitive power for the textile industry by reducing the production cost and period.

• The Korean Journal of Quaternary Research
• /
• v.9 no.1
• /
• pp.1-18
• /
• 1995

The intent of this study is to suppose the time of engraving of Bangudae-rockgraving-picture and the change of the ancient soci-ety related to the Postglacial transgression and regression in the Ulsan Bay. Main results can be summed up as follows; 1. It is supposed that the shoreline in the maximum Postglacial transgression of the Ulsan bay has arrived to Gulhwa-Ri about 14km upstream from the present Taehwa River mouth. 2,.This transgression has occurred about 6,000-5,000 years ago. The prehistoric men around the Bangudae had hunted the whale near the inner bay From this time the people had begun to engrave pictures on the Rock of Bangudae for the ceremony and instruction of the whale hunting,. 3. Since then the shoreline had regressed and the whale hunting area had moved to distant area from the residence and the number of the captured whales had diminished. The whale hunting society had been transformed to the overland animals on the Bangudae-rockgraving- pictures had gradually increased.

• Laser Solutions
• /
• v.13 no.2
• /
• pp.6-9
• /
• 2010

In printed electronics, printing rolls are used to transfer electronic ink onto a flexible substrate. Generally printing rolls are being made by the indirect laser method which is based on the etch process, thus not environment-friendly and not suitable for making a large printing roll. For the pursuit of making a large printing roll for mass printing of electronic devices, we have directly engraved micro-patterns into a Zn plated printing roll using a 30W pulse-modulated fiber laser. We have successfully engraved line patterns ranging from about 15-30${\mu}m$ in width.

• Laser Solutions
• /
• v.15 no.4
• /
• pp.16-19
• /
• 2012

Due to the fact that the dimensions of circuit lines of IC substrates have been forecast to reduce rapidly, engraving the circuit line patterns with laser has emerged as a promising alternative. To engrave circuit line patterns in an IC substrate, we used a projection ablation technique in which a metal (INVAR) mask and a DPSS UV laser instead of an excimer laser are used. Results showed that the circuit line patterns engraved in the IC substrate have a width of about 15um and a depth of $13{\mu}m$. This indicates that the projection ablation with a metal mask and a DPSS UV laser could feasibly replace the semi-additive process (SAP).

• Journal of Integrative Natural Science
• /
• v.1 no.1
• /
• pp.32-35
• /
• 2008

We fabricated surface pattern on a light guide panel (LGP) using $CO_2$ laser to improve the luminescence performance of inner-scatterer LGP, which is made of PMMA sample with exploiting Q-switched $2^{nd}$ harmonic Nd:YAG laser engraving system, and the effect of surface pattern in the brightness distribution of LGP was analysed. To prove the feasibility of proposed method in the enhancement of LGP performance, we designed three different surface patterns on the inner-scatterer LGP. The experimental results has proved the potential in the application of surface pattern to increasing the brightness of inner-scatterer LGP.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.28 no.1
• /
• pp.24-31
• /
• 2005

The outsole mold of the shoes has been manufactured using electro-discharge machining by graphite electrode or using casting etc. The study is concerned with the pattern design for the outsole of shoes by CAD, the modeling and the generation of NC data by CAM system and the machining by CNC machining center. The ball end mill and the engraving cutter is used as cutter and the cutting conditions are adjusted according to the shapes and sizes of the cutter and part in cutting. The method showed the possibility coping with the rapid change of shoes industry and proposed the possibility for higher productivity and quality on mold-manufacturing of shoes outsole.

• Cross-Cultural Studies
• /
• v.19
• /
• pp.25-38
• /
• 2010

The "Name" is not only representative of a person but also a cultural heritage containing national cultures. Therefore, we can easily find some cultural value from the square inch sized seal texts. This article is a comprehensive study of the characteristics of names appeared on the seals in the Warring States Period. In the Warring States Period, single name is generally used for naming and this style can be divided into 13 categories. Except unavoidable cases, such as using the name of place, the name of person or the reason of physical characteristics, using double name is very rare and this style can be categorized by 8 kinds. In result, using double name is defined as a fringe method of naming in the Warring States Period. In addition, we can find a big difference between the names of Warring States Period and those of Post-Qin and Han Dynasties in the structural aspects. In conclusion, understanding of the characteristics of names from the Warring States Period can be a great help to better understanding of ancient books and unearthed documents.