• Proceedings of the IEEK Conference
• /
• 2005.11a
• /
• pp.1305-1308
• /
• 2005

Recently, the basic research which is supported by engineering has been studied in order to develop oriental medicine scientifically. However, the research only has been limited to quantization, visualization and generalization of biological signal. In this paper, we studied about the effects to 12 Kyungmaks of Body based on meridian theory in oriental medicine after Taichi practice. we measured the heating time on the key measuring point of the meridian of the human body's left and right by using heating machine. After taichi practice than other stimulation, experimental results showed that disharmony state of meridian had changed to harmony state more quickly.

• Architectural research
• /
• v.7 no.2
• /
• pp.69-79
• /
• 2005

There are no formal decision tools or guidelines to assist owners and contractors in choosing delivery systems and project strategies that would allow for a radical reduction in project cycle time - from the preplanning phase through project start up. Therefore, it is important to identify the state-of-practice and the state-of-art on methods of achieving radical reduction defined as a reduction of 25% or more in overall project cycle time. A comprehensive literature review, three questionnaire surveys, and the seven case studies were conducted and the data obtained from them were analyzed to establish the state-of-practice and state-of-art for project cycle time reduction techniques.

• Advances in Computational Design
• /
• v.2 no.3
• /
• pp.241-256
• /
• 2017

This paper introduces the process for Multi-objective Optimization Framework (MOF) which mediates multiple conflicting design targets. Even though the extensive researches have shown the benefits of optimization in engineering and design disciplines, most optimizations have been limited to the performance-related targets or the single-objective optimization which seek optimum solution within one design parameter. In design practice, however, designers should consider the multiple parameters whose resultant purposes are conflicting. The MOF is a BIM-integrated and simulation-based parametric workflow capable of optimizing the configuration of building components by using performance and non-performance driven measure to satisfy requirements including build programs, climate-based daylighting, occupant's experience, construction cost and etc. The MOF will generate, evaluate all different possible configurations within the predefined each parameter, present the most optimized set of solution, and then feed BIM environment to minimize data loss across software platform. This paper illustrates how Multi-objective optimization methodology can be utilized in design practice by integrating advanced simulation, optimization algorithm and BIM.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2016.05a
• /
• pp.191-191
• /
• 2016

Hai River Basin is one of China's major agricultural areas, with a huge rural population. Water conservancy is of great importance in this region. There are three integral elements in managing rural water resources: the consideration of current situation, the adoption of effective management measures, and the projection of future needs. In this study, we provide an in-depth investigation of current water resources situation of Hai River Basin. Five issues are analyzed: (1) the construction of conservancy projects; (2) the irrigation of farmland; (3)the safety of drinking water; (4)the protection of water environment; and (5)the model of management practice. Existing problems are diagnosed and possible solutions are discussed. Finally, a summary is made for managing water resources and meeting future needs.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.22 no.9
• /
• pp.1199-1207
• /
• 2018

This study was done to identify the effects of self-monitoring method using smartphone video on self-directed learning ability, competency in nursing skills self-confidence and practice satisfaction of nursing students. It was designed a quasi-experimental study with a pre-post test. The participants were 54 students in the experimental group and 51 students in the control group. There was no significant difference in self-directed learning ability (p = .450) between the groups, but there was a significant difference between the pre-post scores of the experimental group. There was no significants difference of competency in nursing skills, self-confidence and practice satisfaction between the two groups. In conclusion, the self-assessment learning method using smartphone video during the self-practice is considered to be an effective method to improve the self-directed learning ability and to ensure the accuracy and skill of the technique.

• Korean Journal of Construction Engineering and Management
• /
• v.12 no.4
• /
• pp.88-96
• /
• 2011

Schedule control is an exceedingly fundamental and important construction business function. Even though enormous research efforts have been exerted in this area, there has been no comprehensive and quantitative study exploring detailed cost control practice of construction companies in terms of practical patterns and trends. In this context, this paper surveyed the patterns and trends of schedule control practice of Korean general contractors. Schedule control process as compared to schedule reduction is focused in this paper. The variables for practical schedule control process were identified first. A survey questionnaire was then developed and used in order to collect data from Korean general contractors. Survey results analyzing responses from 45 companies show that scheduling processes in practice have been significantly enhanced in terms of software tools, manuals, and capabilities of engineers.

• Journal of Advanced Marine Engineering and Technology
• /
• v.37 no.5
• /
• pp.533-540
• /
• 2013

Prime movers in engine rooms inherently are much affected by the adjustment of their governors for the steady state and transient properties, consequently requiring that marine engineers shall be well familiar with the way to manage governor dials for normal operation. The hydro-mechanical governors basically have different control characteristics and adjustment parameters of stability from digital governors. The former include compensation mechanism using dash pot while the control algorithm of the latter is usually based on the PID action. This study is for configuring a simulation module to let trainees practice how to adjust dials for stability on hydraulic governors in the view that the practice by real governors and engines is time consuming and high cost for operation. The governor module includes the adjusting points such as speed set, speed droop, needle valve and compensation pointer with engine module of $2^{nd}$ order coupled. The results of simulation showed satisfactory responses as a training tool for the adjustment of control parameters.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.12 no.9
• /
• pp.4223-4238
• /
• 2011

The advantages of grouting are the simple instrument, the simple procedure of practice and the simple verification of grouting result. but the more grouting practice there is, the more damages of environment from grouting practice and grouting materials there are. so, the grouting materials and methods with the character of environment friendly are introduced in construction field, recently. This paper is to study of the physical characteristics that has thixotropic character and that consists of inorganic and polycarboxylate co-polymer. In study, various testing methods are performed such as a viscosity, a thixotropy, a compressive strength, a heavy metal detection and pH measurement in lab test and a low pressure injection test and a high pressure injection test in field with different soil type. As a result, a optimum mix ratio is proposed by analyzing the result of lab test. the field applicability is verified by checking a injection pressure, a grout volume and a hardened body of grout by excavating the practice site.

• Korean Journal of Construction Engineering and Management
• /
• v.15 no.3
• /
• pp.113-119
• /
• 2014

Recently, the demand on the practical application of life-cycle cost effectiveness for design and rehabilitation of structure is rapidly growing unprecedently in engineering practice. Accordingly, in the 21st century, it is almost obvious that life-cycle cost together with value engineering will become a new paradigm for all engineering decision problems in practice. However, in spite of impressive progress in the researches on the LCC, the most researches have only focused on the Deterministic or Probabilistic LCC analysis approach (Level-1 LCC Model) at design stage. Thus, the goal of this study is to develop a practical and realistic methodology for the Lifetime risk based Life-Cycle Cost (LCC)-effective optimum decision-making at design stage.

• Journal of Engineering Education Research
• /
• v.22 no.2
• /
• pp.61-70
• /
• 2019

This paper deals with a 'Designeer' education program that has a specific objective of educating design to undergraduate students in mechanical engineering with the aim of enhancing their ability of collaboration with designers when they are going to work in the field after graduation. The entire curriculum of the Designeer education program is introduced first, the end of which two-semester Capstone Design Courses for senior students is offered to let them practice all the knowledge and skills in a project-based learning environment. Learning specific matters such as sketching & visual thinking, prototyping and user experience design is one thing and practicing those knowledge and skills into a Capstone Design project is another. At this point, design thinking process needs to be in place to give students a foresight of one-year journey and to ensure that they will produce a desirable, feasible and viable product at the end of the year when they define the right problem at the beginning. Their frustrations and discoveries while applying design thinking throughout the year is explained by taking an example of a Robot Vacuum Cleaner design project. Finally, we provide real examples of effective methods to practice divergent and convergent phases.