• Food Science and Preservation
• /
• v.18 no.6
• /
• pp.980-985
• /
• 2011

This study was conducted to determine the acetic-acid fermentation properties of apple juice (initial alcohol content, apple juice concentration, acetic-acid content, and inoculum size) in flask scale. At the acetic-acid fermentation of apple juice with 3, 5, 7, and 9% initial alcohol content, the maximum acidity after 10-day fermentation was 5.88% when the initial alcohol content was 5%. The acetic-acid fermentation did not proceed normally when the initial alcohol content was 9%. When the initial Brix was $1^{\circ}$, the acidity gradually increased, and the acidity after 12-day acetic-acid fermentation was 4.48%. Above 4% acidity was attained faster when the apple juice concentration was 5 and 10 $^{\circ}Brix$ than when it was 1 and 14 $^{\circ}Brix$. When the initial acidity was 1% or above (0.3, 0.5, 1.0, and 2.0%), the acetic-acid fermentation proceeded normally. The acetic-acid fermentation also proceeded normally when the inoculum sizes were 10 and 15%, and the acidity after eight-day acetic-acid fermentation was 5.60 and 6.05%, respectively. Therefore, the following were considered the optimal acetic-acid fermentation conditions for apple cider vinegar: 5% initial alcohol content, 5 $^{\circ}Brix$ or above apple juice concentration, 1.0% or above initial acidity, and 10% or above inoculum size. Apple cider vinegar with above 5% acidity can be produced within 48 h under the following acetic-acid fermentation conditions: 7% initial alcohol content, about 1% initial acidity, and 10% inoculum volume at $30^{\circ}C$, 30 rpm, and 1.0 vvm, using 14 $^{\circ}Brix$ apple juice in a mini-jar fermentor as a pre-step for industrial-scale adaptation.

• Journal of radiological science and technology
• /
• v.44 no.5
• /
• pp.525-534
• /
• 2021

In order to provide high-quality medical services to the public and contribute to the improvement of public health, it is necessary to enact an independent law according to the work of radiological technologists. Therefore, this study intends to review the regulations related to radiographers in the Medical Service Technologists, etc. Act. and to present opinions and directions for enactment of individual laws for radiological technologists. An online survey was conducted to 15,000 radiological technologists working in medical institutions and education sites in Korea; 1,027 people (6.85%) responded. The questionnaire consisted of 3 questions on demographic characteristics, 5 questions on the scope of work, and 12 questions on the revision of the Medical Service Technologists, etc. Act. and the establishment of the Radiological Technologist Independent Act. Reliability and factor analysis were performed on 9 questions measured on a Likert 5-point scale in "Revision of the Medical Service Technologists, etc. Act. and the establishment of the Radiological echnologist Independent Act" among the questionnaire items. Reliability for the total 9 questions was Chronbach α=0.728. There was a high perception that the regulations related to radiological technologists were insufficient in the current Medical Service Technologists, etc. Act., and the perception that examinations performed by radiological technologists at medical institutions were included in medical practice was high. If the Radiological Technologist Independent Act is enforced, a high percentage of respondents said that they could receive legal protection through the institutionalization of the scope of work, that the status of radiological technologists would be improved, and the scope of work would be expanded. The response that the scope of work of radiological technologists should be included was the highest at 96.6%. In the analysis according to demographic characteristics, it was found that 96.7% of the respondents were agreed regardless of the factors. Radiological technologists will have to work hard to secure the public health by coping with new radiology devices, procedures and treatment methods. Therefore, as the results of this study, it is expected that the enactment and implementation of the Radiological Technologist Independent Act will contribute to the improvement of the quality of treatment for patients and to the public health.

• Journal of the Korean Applied Science and Technology
• /
• v.36 no.3
• /
• pp.758-765
• /
• 2019

The purpose of the this study was to determine the comparative analysis of body muscle activities in plank exercise with and without thera-band. Twelve healthy adult males(age, $21.75{\pm}.57$ years; height, $173.33{\pm}1.34cm$; body mass, $65.92{\pm}1.64kg$; and BMI, $21.93{\pm}.46kg/m^2$) participated in this study as subjects. Plank exercises(full, elbow, side, and reverse plank) were performed with four different thera-band in without(WT), red color(RT), blue color(BT), and siver color(ST). We measured the muscle activities of the erector spinae(ES), deltoideus p. acromialis(DA), external oblique(EO), rectus abdominis(RA), rectus femoris(RF), latissimus dorsi(LD), pectoralis major(PM), and biceps femoris(BF). The research findings were as follows. ES and DA muscle activities were greatest during full plank performed with the WT(p<.05). EO, RA, RF, and PM muscle activities were greatest during full plank performed with the ST(p<.05). ES and DA muscle activities were greatest during elbow plank performed with the WT(p<.05). RF and PM muscle activities were greatest during elbow plank performed with the ST(p<.05). ES, EO, RA, RF, LD, PM, and BF muscle activities were greatest during side plank performed with the ST(p<.05). DA, EO, RA, RF, LD, PM, and BF muscle activities were greatest during reverse plank performed with the ST(p<.05). These results are expected to serve as reference materials for plank exercise applications in training programs for body muscle strengthening.

• Journal of Bio-Environment Control
• /
• v.28 no.4
• /
• pp.366-375
• /
• 2019

This experiment aims to determine the proper irrigation scheduling based on a whole-substrate capacitance using a newly developed device (SCMD) by comparing with the integrated solar radiation automated irrigation system (ISR) and sap flow sensor automated irrigation system (SF) for the cultivation of tomato (Solanum lycopersicum L. 'Hoyong' 'Super Doterang') during spring to winter season. For the SCMD system, irrigation was conducted every 10 minutes after the first irrigation was started until the first run-off was occurred, of which the substrate capacitance was considered to be 100%. When the capacitance threshold (CT) was reached to the target point, irrigation was re-conducted. After that, when the target drain volume (TDV) was occurred, the irrigation stopped. The irrigation volume per event for the SCMD was set to 50, 75, or 100 mL at CT 0.9 and TDV 100 mL during the spring to summer cultivation, and the CT was set to 0.65, 0.75, 0.80, or 0.90 in the winter cultivation. When the irrigation volume per event was set to 50, 75, or 100 mL, the irrigation frequency in a day was 39, 29, and 19, respectively, and the drain rate was 3.04, 9.25, and 20.18%, respectively. When the CT was set to 0.65, 0.75, or 0.90 in winter, the irrigation frequency was about 6, 7, 15 times, respectively and the drain rate was 9.9, 10.8, 35.3% respectively. The signal of stem sap flow at the beginning of irrigation starting time did not correspond to that of solar irradiance when the irrigation volume per event was set to 50 or 75 mL, compared to that of 100 mL. In winter cultivation, the stem sap flow rate and substrate volumetric water content at the CT 0.65 treatment were very low, while they were very high at CT 0.90 was high. All the integrated data suggest that the proper range of irrigation volume per event is from 75 to 100 mL under at CT 0.9 and TDV 100 mL during the spring to summer cultivation, and the proper CT seems to be higher than 0.75 and lower than 0.90 under at 75 mL of the irrigation volume per event and TDV 70 mL during the winter cultivation. It is going to be necessary to investigate the relationship between capacitance value and substrate volumetric water content by determining the correction coefficient.

• Ecology and Resilient Infrastructure
• /
• v.7 no.4
• /
• pp.227-237
• /
• 2020

Microclimatic data were measured, and the human thermal sensation was analyzed at 10 local climate zones based on the major land cover classification to investigate the thermal environment of urban areas during summer nighttime. From the results, the green infrastructure areas (GNIAs) showed an average air temperature of 1.6℃ and up to 2.4℃ lower air temperature than the gray infrastructure areas (GYIAs), and the GNIAs showed an average relative humidity of 9.0% and up to 15.0% higher relative humidity. The wind speed of the GNIAs and GYIAs had minimal difference and showed no significance at all locations, except for the forest location, which had the lowest wind speed owing to the influence of trees. The local winds and the surface roughness, which was determined based on the heights of buildings and trees, appeared to be the main factors that influenced wind speed. At the mean radiant temperature, the forest location showed the maximum value, owing to the influence of trees. Except at the forest location, the GNIAs showed an average decrease of 5.5℃ compared to GYIAs. The main factor that influenced the mean radiant temperature was the sky view factor. In the analysis of the human thermal sensation, the GNIAs showed a "neutral" thermal perception level that was neither hot nor cold, and the GYIAs showed a "slightly warm" level, which was a level higher than those of the GNIAs. The GNIAs showed a 3.2℃ decrease compared to the GYIAs, except at the highest forest location, which indicated a half-level improvement in the human thermal environment.

• Journal of Intelligence and Information Systems
• /
• v.28 no.2
• /
• pp.237-262
• /
• 2022

There has been a growing interest in IPOs (Initial Public Offerings) due to the profitable returns that IPO stocks can offer to investors. However, IPOs can be speculative investments that may involve substantial risk as well because shares tend to be volatile, and the supply of IPO shares is often highly limited. Therefore, it is crucially important that IPO investors are well informed of the issuing firms and the market before deciding whether to invest or not. Unlike institutional investors, individual investors are at a disadvantage since there are few opportunities for individuals to obtain information on the IPOs. In this regard, the purpose of this study is to provide individual investors with the information they may consider when making an IPO investment decision. This study presents a model that uses machine learning and text analysis to predict whether an IPO stock price would move up or down after the first 5 trading days. Our sample includes 691 Korean IPOs from June 2009 to December 2020. The input variables for the prediction are three tone variables created from IPO prospectuses and quantitative variables that are either firm-specific, issue-specific, or market-specific. The three prospectus tone variables indicate the percentage of positive, neutral, and negative sentences in a prospectus, respectively. We considered only the sentences in the Risk Factors section of a prospectus for the tone analysis in this study. All sentences were classified into 'positive', 'neutral', and 'negative' via text analysis using TF-IDF (Term Frequency - Inverse Document Frequency). Measuring the tone of each sentence was conducted by machine learning instead of a lexicon-based approach due to the lack of sentiment dictionaries suitable for Korean text analysis in the context of finance. For this reason, the training set was created by randomly selecting 10% of the sentences from each prospectus, and the sentence classification task on the training set was performed after reading each sentence in person. Then, based on the training set, a Support Vector Machine model was utilized to predict the tone of sentences in the test set. Finally, the machine learning model calculated the percentages of positive, neutral, and negative sentences in each prospectus. To predict the price movement of an IPO stock, four different machine learning techniques were applied: Logistic Regression, Random Forest, Support Vector Machine, and Artificial Neural Network. According to the results, models that use quantitative variables using technical analysis and prospectus tone variables together show higher accuracy than models that use only quantitative variables. More specifically, the prediction accuracy was improved by 1.45% points in the Random Forest model, 4.34% points in the Artificial Neural Network model, and 5.07% points in the Support Vector Machine model. After testing the performance of these machine learning techniques, the Artificial Neural Network model using both quantitative variables and prospectus tone variables was the model with the highest prediction accuracy rate, which was 61.59%. The results indicate that the tone of a prospectus is a significant factor in predicting the price movement of an IPO stock. In addition, the McNemar test was used to verify the statistically significant difference between the models. The model using only quantitative variables and the model using both the quantitative variables and the prospectus tone variables were compared, and it was confirmed that the predictive performance improved significantly at a 1% significance level.

• Journal of Appropriate Technology
• /
• v.6 no.1
• /
• pp.28-36
• /
• 2020

Sustainable appropriate technology requires user-centered design with consideration of the political, cultural and environmental aspects of the area. However, in the preparation of appropriate technology, there is a limit to the prior grasp of the user's intention and experience leading to the actual behavior of the user after the dissemination. As a result, appropriate technologies are often inconvenient for practical use or used for other purposes, contrary to the designer's intention. This study analyzes the case of appropriate technology with an analysis framework that reflects Maier's affordance theory, and proposes a design solution that can overcome the limitations of existing design. Affordance theory is the theory of factors that cause the user to identify and use features through interpretation based on prior knowledge and experience about things. The analysis cases in this study are the interviews with the designers, management education materials, and manager interviews for water purification systems at three of six schools in Binh Dinh Province, Vietnam, from August 2015 to January 2018. The case was attempted to be improved by periodic installation, maintenance, and inspection, but similar problems continued to occur. First, the facility inspections and manager interviews are compared with manager training materials distributed at the time of installation to find inconsistencies. Next, we analyze the designer's intended affordance and the affordances that actually influenced the management behavior. And then, we propose design solutions based on commonly found problems and affordances. This study suggests that it is necessary to apply the design considering the user's behavior before distributing the appropriate technology, and this study will be precedent in the process of finding the improvement through the analysis framework based on the affordance.

• Journal of Korean Society of Forest Science
• /
• v.66 no.1
• /
• pp.16-36
• /
• 1984

It is very important in forestry to study the shear strength of weathered granitic soil, because the soil covers 66% of our country, and because the majority of land slides have been occured in the soil. In general, the causes of land slide can be classified both the external and internal factors. The external factors are known as vegetations, geography and climate, but internal factors are known as engineering properties originated from parent rocks and weathering. Soil engineering properties are controlled by the skeleton structure, texture, consistency, cohesion, permeability, water content, mineral components, porosity and density etc. of soils. And the effects of these internal factors on sliding down summarize as resistance, shear strength, against silding of soil mass. Shear strength basically depends upon effective stress, kinds of soils, density (void ratio), water content, the structure and arrangement of soil particles, among the properties. But these elements of shear strength work not all alone, but together. The purpose of this thesis is to clarify the characteristics of shear strength and the related elements, such as water content ($w_o$), void ratio($e_o$), dry density (${\gamma}_d$) and specific gravity ($G_s$), and the interrelationship among related elements in order to decide the dominant element chiefly influencing on shear strength in natural/undisturbed state of weathered granitic soil, in addition to the characteristics of soil hardness of weathered granitic soil and root distribution of Pinus rigida Mill and Pinus rigida ${\times}$ taeda planted in erosion-controlled lands. For the characteristics of shear strength of weathered granitic soil and the related elements of shear strength, three sites were selected from Kwangju district. The outlines of sampling sites in the district were: average specific gravity, 2.63 ~ 2.79; average natural water content, 24.3 ~ 28.3%; average dry density, $1.31{\sim}1.43g/cm^3$, average void ratio, 0.93 ~ 1.001 ; cohesion, $ 0.2{\sim}0.75kg/cm^2$ ; angle of internal friction, $29^{\circ}{\sim}45^{\circ}$ ; soil texture, SL. The shear strength of the soil in different sites was measured by a direct shear apparatus (type B; shear box size, $62.5{\times}20mm$; ${\sigma}$, $1.434kg/cm^2$; speed, 1/100mm/min.). For the related element analyses, water content was moderated through a series of drainage experiments with 4 levels of drainage period, specific gravity was measured by KS F 308, analysis of particle size distribution, by KS F 2302 and soil samples were dried at $110{\pm}5^{\circ}C$ for more than 12 hours in dry oven. Soil hardness represents physical properties, such as particle size distribution, porosity, bulk density and water content of soil, and test of the hardness by soil hardness tester is the simplest approach and totally indicative method to grasp the mechanical properties of soil. It is important to understand the mechanical properties of soil as well as the chemical in order to realize the fundamental phenomena in the growth and the distribution of tree roots. The writer intended to study the correlation between the soil hardness and the distribution of tree roots of Pinus rigida Mill. planted in 1966 and Pinus rigida ${\times}$ taeda in 199 to 1960 in the denuded forest lands with and after several erosion control works. The soil texture of the sites investigated was SL originated from weathered granitic soil. The former is situated at Py$\ddot{o}$ngchangri, Ky$\ddot{o}$m-my$\ddot{o}$n, Kogs$\ddot{o}$ng-gun, Ch$\ddot{o}$llanam-do (3.63 ha; slope, $17^{\circ}{\sim}41^{\circ}$ soil depth, thin or medium; humidity, dry or optimum; height, 5.66/3.73 ~ 7.63 m; D.B.H., 9.7/8.00 ~ 12.00 cm) and the Latter at changun-long Kwangju-shi (3.50 ha; slope, $12^{\circ}{\sim}23^{\circ}$; soil depth, thin; humidity, dry; height, 10.47/7.3 ~ 12.79 m; D.B.H., 16.94/14.3 ~ 19.4 cm).The sampling areas were 24quadrats ($10m{\times}10m$) in the former area and 12 in the latter expanding from summit to foot. Each sampling trees for hardness test and investigation of root distribution were selected by purposive selection and soil profiles of these trees were made at the downward distance of 50 cm from the trees, at each quadrat. Soil layers of the profile were separated by the distance of 10 cm from the surface (layer I, II, ... ...). Soil hardness was measured with Yamanaka soil hardness tester and indicated as indicated soil hardness at the different soil layers. The distribution of tree root number per unit area in different soil depth was investigated, and the relationship between the soil hardness and the number of tree roots was discussed. The results obtained from the experiments are summarized as follows. 1. Analyses of simple relationship between shear strength and elements of shear strength, water content ($w_o$), void ratio ($e_o$), dry density (${\gamma}_d$) and specific gravity ($G_s$). 1) Negative correlation coefficients were recognized between shear strength and water content. and shear strength and void ratio. 2) Positive correlation coefficients were recognized between shear strength and dry density. 3) The correlation coefficients between shear strength and specific gravity were not significant. 2. Analyses of partial and multiple correlation coefficients between shear strength and the related elements: 1) From the analyses of the partial correlation coefficients among water content ($x_1$), void ratio ($x_2$), and dry density ($x_3$), the direct effect of the water content on shear strength was the highest, and effect on shear strength was in order of void ratio and dry density. Similar trend was recognized from the results of multiple correlation coefficient analyses. 2) Multiple linear regression equations derived from two independent variables, water content ($x_1$ and dry density ($x_2$) were found to be ineffective in estimating shear strength ($\hat{Y}$). However, the simple linear regression equations with an independent variable, water content (x) were highly efficient to estimate shear strength ($\hat{Y}$) with relatively high fitness. 3. A relationship between soil hardness and the distribution of root number: 1) The soil hardness increased proportionally to the soil depth. Negative correlation coefficients were recognized between indicated soil hardness and the number of tree roots in both plantations. 2) The majority of tree roots of Pinus rigida Mill and Pinus rigida ${\times}$ taeda planted in erosion-controlled lands distributed at 20 cm deep from the surface. 3) Simple linear regression equations were derived from indicated hardness (x) and the number of tree roots (Y) to estimate root numbers in both plantations.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.15 no.1
• /
• pp.59-73
• /
• 1982

Differences of lipids, especially total lipid composition, fatty acid and sterol composition of the flesh lipids between three species of cephalopods were investigated, since available researches concerning lipids in flesh tissues of the cephalopod are very limited. Extracted total lipid from the flesh tissues were fractionated by silicic acid column chromatography into three lipid classes of neutral lipids, glycolipids and phospholipids. The lipid compositions of total lipid and neutral lipids were estimated by the method of thin layer chromatography and TLC-scanner. The sterol compositions of unsaponifiable matters from total lipid were determined by using thin layer chromatography and gas-liquid chromatography. The fatty acid composition of each lipid class was also determined by gas-liquid chromatography. Total lipid contents of flesh tissues from three species of the cephalopods were 0.5 in Octopus vulgare, 0.8 in Octopus variabilis and $0.6\%$ in Loligo beka based on wet weight, the contents of total fatty acid in total lipid were 19.3, 47.8 and $38.4\%$, and the contents of unsaponifiable matters were 10.9, 18.8 and $41.1\%$, respectively. Total lipid was mainly composed of sterols and polar lipid-pigments as major components in each sample and the proportion of sterols and polar lipid-pigments to total lipid ranged from 27.0 to $35.5\%$ and 38.3 to $63.4\%$, respectively. The other lipid components of total lipid, e.g. triglycerides, free fatty acids, and carbohydrate-esterified sterols were determined as a minor components. The major component fatty acid in total lipid was palmitic acid and additionaly it chiefly consisted of the other unsaturated acids such as oleic, linoleic, octadecatetraenoic and eicosapentaenoic acid as major components of the acid. The compositions of sterol in three species of cephalopod were found to contain mainly cholesterol for its proportion to total sterols was 82.4 to $89.1\%$. However the other sterols such as 22-dehydrocholesterol and 24-methylenecholesterol were determined in addition to cholesterol as a minor components. The result of fractional composition of lipid class in total lipid was that total lipid had large .amount of polar lipid and small amount of nonpolar lipid i, e, neutral lipid in each sample, and the contents of phospholipid were higher than that of glycolipid in polar lipid. Neutral lipid was mainly composed of free sterol as major components in each sample and its proportion of free sterols to total neutral lipid was 50.0 to $70.5\%$. The other lipid components of neutral lipid showing similar in quantity, esterified sterols, free fatty acids and triglycerides were determined as a minor components. The major components fatty acid in neutral lipid were palmitic, oleic and hexadecadienoic acid. Palmitic acid was the most abundant and additionaly oleic, linoleic, octadecatetraenoic and myristic acid were the major component fatty acid in glycolipid. But, especially, glycolipid of Loligo beka contained a higher amount of arachidonic acid which also consists of major component in addition to those of acids. Palmitic acid was the most abundant and additionaly, oleic, linoleic and octadecatetraenoic acid were the major component fatty acids in phospholipid.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.17 no.4
• /
• pp.280-290
• /
• 1984

An extensive study has been made on the relationship between the freshness and the compositions of the muscle protein of prawn, Pandalus japonica during the storage under partially frozen condition. The variations of the subunit distribution for sarcoplasmic protein and myofibrillar protein extracted from the samples by changes of freshness were discussed by sodium dodecylsulfate-poly-acrylamide gel (SDS-PAG) electrophoresis. On the other hand, the denaturation constant ($K_D$) of the myofibrillar protein extracted from the prawn stored at $-3^{\circ}C\;and\;-20^{\circ}C$ were successively compared. The prawn muscle contained about $18\%$ of protein with the composition of $32\%$ in sarcoplasmic protein, $56\%$ in myofibrillar protein, $10\%$ in residual intracellular protein and $2\%$ in stroma. The indices for estimating freshness of the muscle were approached to the early stage of putrefaction on the 26th day of the storage with $25.29mg\%$ of total volatile basic nitrogen, $31.36\%$ of K-value and 8.83 of pH. The content of the myofibrillar protein was remarkably decreased with the time during the storage while that of residual intracellular protein was increased. The $K_D$ values of the myofibrillar protein were $9.03{\times}10^{-6}sec^{-1}\;at\;-3^{\circ}C\;and\;4.42{\times}10^{-6}sec^{-1}\;at\;-20^{\circ}C$. The results of the analysis of SDS-PAG electrophoretograms indicated that the sarcoplasmic protein and the myofibrillar protein were composed of 12 subunits and 17 subunits in the muscle of instantaneously killed prawn ana were changed into 8 subunits and 22 subunits in the muscle stored for 26 days, respectively. It is noticeable that 30,000, 41,000, 107,000, 136,000, 170,000 173,000, 185,000, and 198,000 daltons of the newly appeared 8 subunits were found in the myofibrillar protein from the prawn muscle stored for 26 days. The amino acid composition of the muscle protein showed that the most of amino acids were slightly decreased with the days of the storage. With respect to the free amino acid composition of the muscle of instantaneously killed prawn, glycine, proline, arginine, alanine and taurine comprised $93\%$ of the total free amino acids. Taurine, valine, leucine, phenylalanine, serine, lysine, methionine, isoleucine and histidine were increased during the storage period but exceptionally proline was decreased.