• 한국소음진동공학회논문집
• /
• 제23권5호
• /
• pp.472-478
• /
• 2013

This paper presents optimal design procedures of mount based on a magnetorheological(MR) fluid to isolate the vibration in heavy diesel engine system. At first, frequency response and force-displacement transmissibility methods are used to get required damping force that is necessary for effective vibration isolation. From this result, a new type of high damping force engine mount is proposed and the governing equation of Bingham plastic behavior of MR fluid in flow path is mathematically derived under cylindrical coordinates. Finally, parametric design optimization featuring finite element is performed using ANSYS software to get the required damping force in MR mount system which can be used to reduce engine vibration. Damping force of the MR mount is then determined as an objective function in this analysis based on ANSYS. Furthermore, Magnetic analysis is then applied in this process.

• 한국자동차공학회논문집
• /
• 제7권8호
• /
• pp.116-122
• /
• 1999

According to the stringent exhaust emission regulation, precise control of air fuel ratio is one of the most important issues on gasoline engine. Although many researches have been carried out to identify the fuel transport phenomena in a port fueled gasoline engine, complexity of fuel film behavior in the intake port makes it difficult. The fuel film behavior was investigated recently by using visualization method and these gave us qualitative understanding. The purpose of this study is to estimate of wall wetting fuel in the intake port and the inducted fuel mass was predicted by using wall wetting fuel model . The model coefficient($\alpha$,$\beta$) and fuel film mass on the port wall were determined from measured in-cylinder HC concentration using FRFID after injection off. The fuel film mass was increased, but $\alpha$(ratio of directly inducted fuel mass into cylinder from injected fuel mass) was decreased with increasing load at the same engine speed. $\beta$is nearly constant value(0.8~0.9). when injected fuel mass is varied at 1500rpm , the calculated air fuel ratio using well wetting fuel model was nearly the same as measured by UEGO.

• 한국자동차공학회논문집
• /
• 제19권3호
• /
• pp.23-28
• /
• 2011

To secure basic data for intake port design, effects of a port masking on the part load performance were investigated in a 4 valve SI engine. For this purpose, 9 kinds of masking, which have different shapes and masking ratio, are applied to the engine intake system. The characteristics of the performance were estimated through mixture response test at various engine load and speed. The results show that NOx emission, one of indexes for stratification, increases considerably in spite of retarded spark timing due to the stratification which is caused by unequal flow distribution between the two intake ports. The mechanism of stratification by masking is different from axial stratification and the fuel entering through masked port plays a very important role in this stratification process. In conclusion, the port masking method could be easily applied to engine intake system and be very effective for inducing the stratified charging without the change of port design.

• 한국자동차공학회논문집
• /
• 제17권3호
• /
• pp.81-89
• /
• 2009

In this experimental study, the effects of clean alternative fuels compatible with diesel combustion on nano-sized particle emission characteristics were investigated in a 0.5L auto-ignited single-cylinder engine with a compression ratio of 15. Because the number concentration of nano-sized particles emitted by automotive engine, that are suspected of being hazardous to human health and environment, might increase with engine fuel considerably and recently attracted attention. So a ultra-low sulfur diesel(ULSD), BD100(100% bio-diesel) and Di-Methyl Ether(DME) fuels used for this study. And, as a particle measuring instrument, a fast-response particle spectrometer (DMS 500) with heated sample line was used for continuous measurement of the particle size and number distribution in the size range of 5 to 1000nm (aerodynamic diameter). As this research results, we found that this measurements involving the large proportion of particles under size order of 300nm and number concentration of $4{\times}10^9$ allowed a single or bi-modal distribution to be found at different engine load conditions. Also the influence of oxygen content in fuel and the catalyst could be a dominant factor in controlling the nano-sized particle emissions in auto-ignited engine.

• 항공우주시스템공학회지
• /
• 제11권5호
• /
• pp.6-12
• /
• 2017

본 논문은 75톤급 개방형(Open-cycle) 액체로켓엔진(Liquid Propellant Rocket Engine, LPRE)의 수학적 모델링 및 정상상태(Steady state)에서의 시뮬레이션을 수행한 내용을 다룬다. 액체로켓엔진의 각 구성품들은 열역학 및 동역학적 특성을 이용하여 크게 7개로 분류할 수 있으나, 본 논문의 액체로켓엔진 시뮬레이션 모델을 간단화하기 위해 열전달 모델링을 생략하여 4개의 지배방정식(Govern equation)을 이용하였다. 정상상태에서의 실험 데이터와 시뮬레이션 데이터의 오차율을 통해 모델링을 확인하였으며 공칭 작동점에서의 선형화 모델을 이용하여 안정성을 판단하였다. 또한, 시뮬레이션 모델링을 검증하기 위해 실험 데이터의 과도응답을 비교하였다.

• 한국IT서비스학회지
• /
• 제2권2호
• /
• pp.87-95
• /
• 2003

With the increasing proliferation of World Wide Web, electronic mail systems have become very widely used communication tools. Researches on e-mail classification have been very important in that e-mail classification system is a major engine for e-mail response management systems which mine unstructured e-mail messages and automatically categorize them. in this research we develop e-mail classifiers for e-mail Response Management Systems (ERMS) using naive bayesian learning and centroid-based classification. We analyze which method performs better under which conditions, comparing classification accuracies which may depend on the structure, the size of training data set and number of classes, using the different data set of an on-line shopping mall and a credit card company. The developed e-mail classifiers have been successfully implemented in practice. The experimental results show that naive bayesian learning performs better, while centroid-based classification is more robust in terms of classification accuracy.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2007년도 제29회 추계학술대회논문집
• /
• pp.7-12
• /
• 2007

본 연구에서는 선행연구에 의해 설계되어진 20인승급 소형 위그선의 주날개 구조를 엔진 및 프로펠러에 의해 유발되는 진동을 가진력으로 하여 강제진동 해석을 수행하였다. 대상 위그선은 왕복엔 진을 날개에 장착하여 프로펠러에 의한 추력으로 비행하며， 미는 형식(Pusher Type)의 엔진 배열을 취하고 있다. 유한요소해석을 위해서 구조해석 상용프로그랩인 MSC/NASTRAN을 사용하였으며， 엔진의 주요 진동 특성인 X-mode 와 Y-mode 그리고 Z-mode를 특정 가진 주파수로 하여 주파수 응답 해석을 수행하였고, 엔진의 추력방향 진동 모드인 X-mode를 프로펠러의 회전에 의해 진동을 수반하는 가진 추력으로 가정하여 과도응답 해석을 수행한 후 날개의 진동 특성을 살펴보았다.

• 한국추진공학회지
• /
• 제17권4호
• /
• pp.10-15
• /
• 2013

설계 최적화를 위해서 설계자는 우선적으로 설계영역 전반에 걸쳐 정확한 정보를 획득하고, 설계영역 탐색을 실시한 후에 최적화를 실시해야 한다. 최근에 설계영역 탐색을 우선적으로 실행하기 위하여 실험계획법과 반응표면모델에 최적화를 적용하는 통합설계 프레임워크의 적용이 산업체 전반으로 일반화되고 있다. 본 연구에서는 터보팬 엔진 설계점 최적화를 위하여, 설계영역의 정보를 조밀하게 얻을 수 있으며 통계학적인 직교성과 균형성을 모두 만족하는 7 수준 직교배열을 생성한 후에 반응표면모델을 구축한다. 구축된 반응표면모델에 전역 최적값을 찾기 위하여 다목적 유전자알고리즘을 적용하여 주어진 제한조건을 만족하는 최적값을 찾아 GasTurb 결과와 검증을 수행한다.

• Journal of Advanced Marine Engineering and Technology
• /
• 제38권6호
• /
• pp.632-638
• /
• 2014

선박용 저속 2행정 디젤엔진의 선체 탑재 후 본체 진동제어를 위한 방법 중 하나로 마찰식 톱브레이싱과 유압식 톱브레이싱의 사용이 널리 이용되고 있으며 이들의 선택은 선주에게 일임되어져 왔다. 특히, 최근에 이르러 톱브레이싱 설치목적에 반하여 선체강성의 상대적 저하는 주 공진회전수를 상용회전수내에 존재하게 만들었고 마찰식 톱브레이싱이 장착된 선박에서 이와 관련된 사고 사례가 보고되었다. 이에 따른 효율적 해결방안으로 다양한 형태의 선박에 대하여 광범위한 진동측정이 제시되었다. 본 논문에서는 이를 바탕으로 톱브레이싱 형식에 따른 엔진 본체 진동의 특성을 확인하였고 엔진 본체 진동을 제어하기 위하여 보다 효율적인 방법에 대하여 고찰하였다.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2009년도 추계학술대회 논문집
• /
• pp.87-88
• /
• 2009