• 한국전산유체공학회지
• /
• 제2권2호
• /
• pp.51-58
• /
• 1997

A reliable computational solver has been developed for the analysis of three-dimensional inviscid compressible flows around a nacelle of a high bypass ratio turbofan engine, The numerical algorithm is based on the modified Godunov scheme to allow the second order accuracy for space variables, while keeping the monotone features. Two step time integration is used not only to remove time step limitation but also to provide the second order accuracy in a time variable. The multi-block approach is employed to calculate the complex flow field, using an algebraic, conformal, and elliptic method. The exact solution of Riemann problem is used to define boundary conditions. The accuracy of the developed solver is validated by comparing its results around the isolated nacelle in the cruise flight regime with the solution obtained using a commercial code "RAMPANT. "

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2005년도 제24회 춘계학술대회논문집
• /
• pp.23-26
• /
• 2005

LOx와 Kerosene을 연료로 사용하는 LRE(Liquid Rocket Engine) Block에서 지상연소시험을 수행할 경우에 발생하는 위험도를 감소시키는 방법을 연구하였다. 추진제누출로 이어지는 위험한 상황에 대한 원인분석도와 추진제 유출시 사고로 이어지는 발전 양상 및 발전 프로세스, 사고시 손실을 줄이기 위한 기술적인 해결방법을 제시함으로써 기존의 확률적인 통계 값을 바탕으로 하는 것과는 또 다른 방법으로써 위험을 감소하기 위한 대안으로 사용하고자 한다.

• 대한기계학회논문집A
• /
• 제21권2호
• /
• pp.223-231
• /
• 1997

A variety of approaches have been investigated for the application of spark-ignition engine knock control. The control method implemented, here as "Fuzzy Control", has the advantage of not requiring the knowledge of a mathematical model of the controlled object and is more robust and flexible than conventional approaches. Knock control in this study is performed using vibration signal which is measured with accelerometer attached to the cylinder block of a 1498cc four-cylinder spark-ignition engine. The experimental results obtained with this method are compared with those obtained with a knock interval controller and with those of a conventional controller. Those results illustrate better performance in torque than knock interval controller and conventional controller.ontroller.

• 한국기계가공학회지
• /
• 제18권4호
• /
• pp.69-75
• /
• 2019

Since gasoline engines are based on a combination of a cast iron liner and an aluminum block, which have different thermal properties and stiffnesses, bore shape distortion is likely to occur during honing due to uneven thermal deformation. To solve this problem, many tests and evaluations are needed to support the development of a high-performance honing stone with low heat generation. Moreover, performance evaluation, which depends on inspection and observation after work, often requires much trial and error to optimize tool design, due to challenges in the accurate interpretation of results. This study confirmed that the assessment of grinding capability was clarified by evaluating performance under severe work conditions and by in-situ measurement and recording of current consumption (workload) and heat generation during operation. As a result of using a honing stone with excellent grinding performance in engine block manufacture-in which cylinder bore distortion caused by thermal deformation during manufacture is a problem-a noticeable improvement in the degree of cylindricity was observed.

• 한국항공우주학회지
• /
• 제42권3호
• /
• pp.237-242
• /
• 2014

항공기용 터보팬 엔진의 성능이 이륙과 같이 급격하게 변하는 상황일 때 압축기에서 서지현상이 발생할 수 있는데, 본 논문에서는 이를 방지하는 것을 목적으로 한다. 제안된 시스템은 연료유량을 개루프 명령으로 생성하고, 가변 안내익을 폐루프로 설계하여 터보팬 엔진에 대한 제어시스템을 고전적인 PID제어기와 퍼지 추론 기법을 적용하여 설계하였다. 시뮬레이션은 SIMULINK를 이용하였는데, 제어로직 구성을 위한 동역학적 모델링은 NPSS(엔진해석프로그램)와 SIMULINK를 연동시켜주는 SIMUNLINK BLOCK인 NPSS S-function을 설계하여 이용하였다. 그리고 시뮬레이션 결과로 PID와 Fuzzy 모든 방법에 있어 VIGV의 제어결과로 서지현상을 방지할 수 있음을 증명하였다.

• International Journal of Naval Architecture and Ocean Engineering
• /
• 제13권1호
• /
• pp.659-673
• /
• 2021

This study aims to investigate the impact of the High Pressure Selective Catalytic Reduction system (SCR-HP) on a large marine two-stroke engine performance parameters by employing thermodynamic modelling. A coupled model of the zero-dimensional type is extended to incorporate the modelling of the SCR-HP components and the Control Bypass Valve (CBV) block. This model is employed to simulate several scenarios representing the engine operation at both healthy and degraded conditions considering the compressor fouling and the SCR reactor clogging. The derived results are analysed to quantify the impact of the SCR-HP on the investigated engine performance. The SCR system pressure drop and the cylinder bypass valve flow cause an increase of the engine Specific Fuel Oil Consumption (SFOC) in the range 0.3-2.77 g/kWh. The thermal inertia of the SCR-HP is mainly attributed to the SCR reactor, which causes a delayed turbocharger response. These effects are more pronounced at low engine loads. This study supports the better understanding of the operating characteristics of marine two-stroke diesel engines equipped with the SCR-HP and quantification of the impact of the components degradation on the engine performance.

• 대한기계학회논문집A
• /
• 제37권4호
• /
• pp.443-446
• /
• 2013

적외선 열화상 기술은 넓은 면적을 동시에 검사할 수가 있고, 크랙 또는 박리와 같은 결함을 실시간으로 검출할 수 있으며, 일반적으로 적외선 열화상은 열복사로 피사체에서 방사되는 적외선 영역을 열화상 카메라를 통하여 가시적인 화상을 만들어 주는 기술이며 모든 물체의 분자가 열에 의해 교란되어 발생하는데 분자 운동은 물체의 온도가 올라가면 증가하고 온도가 내려가면서 감소한다. 본 연구에서는 초음파 서모그래피 기술과 기법의 적용과 타당성을 확인하여 엔진블록의 자동차산업 전반에 수요가 많은 대상체로 하였고, 결함 부위에 비파괴 신뢰성평가에 대한 실험을 수행하여 기술하였다.

• 한국정밀공학회지
• /
• 제22권3호
• /
• pp.123-129
• /
• 2005

The unbalance of the power output, noise, and vibration is happened by the disproportionate pressure variation in the cylinder. For this reason, decrease of the pressure in the cylinder and increase of the residual gas effect on the engine performance. If the abnormal combustion is continued, the crack would be occurred in the engine block. And it could be broken down. For the normal combustion of the SI engine, it is important to supply the balanced mixture by each operating condition. In this study, it was tested the combustion characteristics in the cylinder according to the abnormal adjusting of intake & exhaust valve. This test is willing to set a basic data's analysis fur developing an automotive diagnosis system by analyzing the pressure in the cylinder, the output signal of MAP sensor, the exhaust gas, etc.

• 대한산업공학회지
• /
• 제38권1호
• /
• pp.7-16
• /
• 2012

Manufacturing system design poses many challenges for new factory construction. Factories producing the same product may nevertheless have different layouts. The machining line of the engine shop in an automotive factory is a typical flow line, but the layout concept of the line varies among factories. In this paper, a simulation study on the design concept of the manufacturing system for automotive engines is discussed. For comparison, three types of real engine block lines in different factories are analyzed, and three structures of parallel lines are extracted. The effects of failure distribution on the performance measures of three types of parallel line structures are investigated, and some insights are offered regarding the layout concept.

• 오토저널
• /
• 제7권1호
• /
• pp.55-62
• /
• 1985

This study modeled in axisymmetric solid elements and analyzed the neighbourhood of the contact surface zone between liner and block in a diesel engine. The results of finite element analysis show that this model is deformed by bolt jointed load and pressure load and that stresses can vary much due to major dimensional changes in the joint area. Guidelines have been developed for selecting fillet radii and for the width of the contact area between liner and block.