• Title/Summary/Keyword: Engine Cases

Search Result 339, Processing Time 0.032 seconds

Consideration of Improvement Plans about the Current Status and Problems of Administrative Disciplinary Action for the Ship Officers (해기사 행정처분 현황과 문제점 및 개선방안에 관한 고찰)

  • Na, Song-Jin
    • Journal of Navigation and Port Research
    • /
    • v.43 no.3
    • /
    • pp.153-159
    • /
    • 2019
  • Marine accidents and legal violations result from mistakes and negligences of ship officers, deck officers and engine officers, during the ship navigation and lay days. Due to these accidents and violations, these officers are subjected to disciplinary actions for certification. The disciplinary action, namely certificate punishment is carried out by right rules, processes and equity. However, it is revealed that present situations are different from the principles. For the purpose of finding current states relating to certificate punishment, this study examines and analyses 737 punishment cases, accomplished in 'B' regional office of oceans & fisheries for 5 years from 2014 to 2018. The contents to be analyzed are reprimand agencies, certificate kinds, officers ranks at that time, disciplinary level, violated acts, annual reprimand state, punishment rule and it process, and disciplinary reduction levels. From such valuations various problems, such as disciplinary level deviations among laws, insufficient punishments rules, disciplinary certificate deviation, insufficient reprimand reduction rules, and lack function of crew administrative disciplinary council, are identified. Finally, methods to alleviate the problems identified will be proposed. This study, for the first time analyses the actual administrative disciplinary cases for ship officers'certificates and proposes improvement plans for its incorporation in Korea, This analysis will be useful in the examination of the study for the ship officers and making a plan for them.

The Efficiency Analysis of CRM System in the Hotel Industry Using DEA (DEA를 이용한 호텔 관광 서비스 업계의 CRM 도입 효율성 분석)

  • Kim, Tai-Young;Seol, Kyung-Jin;Kwak, Young-Dai
    • Journal of Intelligence and Information Systems
    • /
    • v.17 no.1
    • /
    • pp.91-110
    • /
    • 2011
  • This paper analyzes the cases where the hotels have increased their services and enhanced their work process through IT solutions to cope with computerization globalization. Also the cases have been studies where national hotels use the CRM solution internally to respond effectively to customers requests, increase customer analysis, and build marketing strategies. In particular, this study discusses the introduction of the CRM solutions and CRM sales business and marketing services using a process for utilizing the presumed, CRM by introducing effective DEA(Data Envelopment Analysis). First, the comparison has done regarding the relative efficiency of L Company with the CCR model, then compared L Company's restaurants and facilities' effectiveness through BCC model. L Company reached a conclusion that it is important to precisely create and manage sales data which are the preliminary data for CRM, and for that reason it made it possible to save sales data generated by POS system on each sales performance database. In order to do that, it newly established Oracle POS system and LORIS POS system concerned with restaurants for food and beverage as well as rooms, and made it possible to stably generate and manage sales data and manage. Moreover, it set up a composite database to control comprehensively the results of work processes during a specific period by collecting customer registration information and made it possible to systematically control the information on sales performances. By establishing a system which unifies database and managing it comprehensively, impeccability of data has been greatly enhanced and a problem which generated asymmetric data could be thoroughly solved. Using data accumulated on the comprehensive database, sales data can be analyzed, categorized, classified through data mining engine imbedded in Polaris CRM and the results can be organized on data mart to provide them in the form of CRM application data. By transforming original sales data into forms which are easy to handle and saving them on data mart separately, it enabled acquiring well-organized data with ease when engaging in various marketing operations, holding a morning meeting and working on decision-making. By using summarized data at data mart, it was possible to process marketing operations such as telemarketing, direct mailing, internet marketing service and service product developments for perceived customers; moreover, information on customer perceptions which is one of CRM's end-products could feed back into the comprehensive database. This research was undertaken to find out how effectively CRM has been employed by comparing and analyzing the management performance of each enterprise site and store after introducing CRM to Hotel enterprises using DEA technique. According to the research results, efficiency evaluation for each site was calculated through input and output factors to find out comparative CRM system usage efficiency of L's Company four sites; moreover, with regard to stores, the sizes of workforce and budget application show a huge difference and so does the each store efficiency. Furthermore, by using the DEA technique, it could assess which sites have comparatively high efficiency and which don't by comparing and evaluating hotel enterprises IT project outcomes such as CRM introduction using the CCR model for each site of the related enterprises. By using the BCC model, it could comparatively evaluate the outcome of CRM usage at each store of A site, which is representative of L Company, and as a result, it could figure out which stores maintain high efficiency in using CRM and which don't. It analyzed the cases of CRM introduction at L Company, which is a hotel enterprise, and precisely evaluated them through DEA. L Company analyzed the customer analysis system by introducing CRM and achieved to provide customers identified through client analysis data with one to one tailored services. Moreover, it could come up with a plan to differentiate the service for customers who revisit by assessing customer discernment rate. As tasks to be solved in the future, it is required to do research on the process analysis which can lead to a specific outcome such as increased sales volumes by carrying on test marketing, target marketing using CRM. Furthermore, it is also necessary to do research on efficiency evaluation in accordance with linkages between other IT solutions such as ERP and CRM system.

Electrochemical Evaluation of Corrosion Property of Welded Zone of Seawater Pipe by DC Shielded Metal Arc Welding with Types of Electrodes (선박 해수배관에서 용접봉의 종류에 따라 직류 아크 용접한 용접부위의 부식특성에 관한 전기화학적 평가)

  • Lee, Sung-Yul;Lee, Kyu-Hwan;Won, Chang-Uk;Na, Shane;Yoon, Young-Gon;Lee, Myeong-Hoon;Kim, Yun-Hae;Moon, Kyung-Man;Kim, Jin-Gyeong
    • Journal of Ocean Engineering and Technology
    • /
    • v.27 no.3
    • /
    • pp.79-84
    • /
    • 2013
  • The seawater pipes in the engine rooms of ships are surrounded by severely corrosive environments caused by fast flowing seawater containing chloride ions, high conductivity, etc. Therefore, it has been reported that seawater leakage often occurs at a seawater pipe because of local corrosion. In addition, the leakage area is usually welded using shielded metal arc welding with various electrodes. In this study, when seawater pipes were welded with four types of electrodes(E4311, E4301, E4313, and E4316), the difference between the corrosion resistance values in their welding zones was investigated using an electrochemical method. Although the corrosion potential of a weld metal zone welded with the E4316 electrode showed the lowest value compared to the other electrodes, its corrosion resistance exhibited the best value compared to the other electrodes. In addition, a heat affected zone welded with the E4316 electrode also appeared to have the best corrosion resistance among the electrodes. Furthermore, the corrosion resistance of the weld metal zone and heat affected zone exhibited relatively better properties than that of the base metal zone in all of the cases welded with the four types of electrodes. Furthermore, the hardness values of all the weld metal zones were higher than the base metal zone.

S-FDS : a Smart Fire Detection System based on the Integration of Fuzzy Logic and Deep Learning (S-FDS : 퍼지로직과 딥러닝 통합 기반의 스마트 화재감지 시스템)

  • Jang, Jun-Yeong;Lee, Kang-Woon;Kim, Young-Jin;Kim, Won-Tae
    • Journal of the Institute of Electronics and Information Engineers
    • /
    • v.54 no.4
    • /
    • pp.50-58
    • /
    • 2017
  • Recently, some methods of converging heterogeneous fire sensor data have been proposed for effective fire detection, but the rule-based methods have low adaptability and accuracy, and the fuzzy inference methods suffer from detection speed and accuracy by lack of consideration for images. In addition, a few image-based deep learning methods were researched, but it was too difficult to rapidly recognize the fire event in absence of cameras or out of scope of a camera in practical situations. In this paper, we propose a novel fire detection system combining a deep learning algorithm based on CNN and fuzzy inference engine based on heterogeneous fire sensor data including temperature, humidity, gas, and smoke density. we show it is possible for the proposed system to rapidly detect fire by utilizing images and to decide fire in a reliable way by utilizing multi-sensor data. Also, we apply distributed computing architecture to fire detection algorithm in order to avoid concentration of computing power on a server and to enhance scalability as a result. Finally, we prove the performance of the system through two experiments by means of NIST's fire dynamics simulator in both cases of an explosively spreading fire and a gradually growing fire.

Comparison of Chemical Composition of Particulate Matter Emitted from a Gasoline Direct Injected (GDI) Vehicle and a Port Fuel Injected (PFI) Vehicle using High Resolution Time of Flight Aerosol Mass Spectrometer (HR-ToF-AMS)

  • Lee, Jong Tae;Son, Jihwan;Kim, Jounghwa;Choi, Yongjoo;Yoo, Heung-Min;Kim, Ki Joon;Kim, Jeong Soo;Park, Sung Wook;Park, Gyutae;Park, Taehyun;Kang, Seokwon;Lee, Taehyoung
    • Asian Journal of Atmospheric Environment
    • /
    • v.10 no.1
    • /
    • pp.51-56
    • /
    • 2016
  • Particulate matter (PM) in the atmosphere has wide-ranging health, environmental, and climate effects, many of which are attributed to fine-mode secondary organic aerosols. PM concentrations are significantly enhanced by primary particle emissions from traffic sources. Recently, in order to reduce $CO_2$ and increase fuel economy, gasoline direct injected (GDI) engine technology is increasingly used in vehicle manufactures. The popularization of GDI technique has resulted in increasing of concerns on environmental protection. In order to better understand variations in chemical composition of particulate matter from emissions of GDI vehicle versus a port fuel injected (PFI) vehicle, a high time resolution chemical composition of PM emissions from GDI and PFI vehicles was measured at facility of Transport Pollution Research Center (TPRC), National Institute of Environmental Research (NIER), Korea. Continuous measurements of inorganic and organic species in PM were conducted using an Aerodyne high-resolution time-of-flight aerosol mass spectrometer (HR-ToF-AMS). The HR-ToF-AMS provides insight into non-refractory PM composition, including concentrations of nitrate, sulfate, hydrocarbon-like and oxygenated organic aerosol, and organic mass with 20 sec time resolution. Many cases of PM emissions during the study were dominated by organic and nitrate aerosol. An overview of observed PM characteristics will be provided along with an analysis of comparison of GDI vehicle versus PFI vehicle in PM emission rates and oxidation states.

Design and Implementation of XQL Query Processing System Using XQL-SQL Query Translation (XQL-SQL 질의 변환을 통한 XQL 질의 처리 시스템의 설계 및 구현)

  • Kim, Chun-Sig;Kim, Kyung-Won;Lee, Ji-Hun;Jang, Bo-Sun;Sohn, Ki-Rack
    • The KIPS Transactions:PartD
    • /
    • v.9D no.5
    • /
    • pp.789-800
    • /
    • 2002
  • XML is a standard format of web data and is currently used as a prevailing language for exchanging data. Most of the commercial data are stored in a relational database. It is quite important to convert these conventionally stored data into those for exchange and use them in data exchange, or to get the query results effectively by utilizing XQL on XML data which are store in a relational database. Thus, it is absolutely required to have a proper query processing mechanism for XML data and to maintain many XML data properly. Up to now, many cases of researches on the storage and retrieval of XML data have been carried out and under study. But, effective retrieval and storage system for path queries like XQL has yet to be contrived. Thus, in this paper, a schema to store XML data is designed, in which DFS-Numbegering method is used to store data effectively. And an effective path query processing method is also designed and implemented, in which a traditional relational database engine is used. That is, XQL is converted into SQL with a XQL processor if a user makes query XQL in a system. A database system executes SQL, and a XML generator uses a generated record and makes a XML document.

A Study on the Effect of Co-operation Partners on Innovation Performance :Focused on service industry (협업 파트너가 혁신성과에 미치는 영향에 관한 연구 :서비스산업을 중심으로)

  • Jeun, Hyang-Ok;Hyun, Byung-Hwan
    • Journal of the Korea Academia-Industrial cooperation Society
    • /
    • v.18 no.7
    • /
    • pp.699-708
    • /
    • 2017
  • The service industry, as a new growth engine, has become more important in response to changes in the global economy and the industrial environment. Developed countries have promoted the competitiveness of the service industry and have enhanced economic added value. Developing new services requires extensive resources. Therefore, cooperation and network building capabilities with customers, suppliers, and various knowledge creation agencies are critical sources of competitiveness. This study classified the Korean service industry by industrial type in order to enhance innovation competence.The Korean service industry lags behind that of developed countries, and this study analyzed the differences of innovation results according to collaboration partners by the classified industry. By adopting a method that applies industrial classification by Dialogic's innovation pattern, this study showed external cooperation results were different by industrial type. Analysis results revealed that companies cooperate with customers and competitors in many cases; however, product innovation was higher for companies that collaborated with private service companies. In the 'Innovation in services' industry, industry cooperation with universities showed organizational innovation achievements. In the 'Innovation through services' industry, cooperation with customers positively affected marketing innovation achievements. Consequently, the need to foster consulting firms and universities that can professionally collaborate with companies is implied in order to enhance the Korean service industry.

Feasibility Study of Fuel Property for Fuel Processing Design on Ship and Warship (연료유 공정설계를 통한 선박 및 함정의 기본품질 적용 가능성 연구)

  • Hwang, Gwang-Tak;Kim, Do-young
    • Journal of the Korea Academia-Industrial cooperation Society
    • /
    • v.19 no.4
    • /
    • pp.143-153
    • /
    • 2018
  • Environmental regulations, which are discussed through the International Maritime Organization, focus on two aspects: the economic supply of fuel oil and, ultimately, securing next-generation energy sources. At present, there are limitations in relation to the basic quality of fuel oil and the direct relation through basic quality when applied to ships and traps in relation to environmental regulations, and the standard for the basic quality of fuel oil is generally used. There are many cases where the composition is very complicated, and the interpretation and analysis of basic quality deviate from the range of the basic standard. In other words, it is difficult to classify and apply the problem when analyzing it in connection with fuel quality and ship operations. In this paper are various factors for the basic quality of fuel oil, and a proposed possibility for the scope of the standard.

Fire Suppression Test using the Automatic Monitor System for Double-Deck Tunnel (복층터널 자동 모니터 소화설비를 이용한 화재진압 실험)

  • Park, Jin-Ouk;Yoo, Yong-Ho;Kim, Hwi-Seung;Park, Byoung-Jik;Kim, Yang-Kyun
    • Fire Science and Engineering
    • /
    • v.31 no.6
    • /
    • pp.40-46
    • /
    • 2017
  • As one of the solutions to deal with economic loss caused by traffic congestion in metropolitan area, a deep underground road has been planned and implemented at home and abroad. The part of them has been pushed ahead with a double-deck scheme which has an advantage in constructability and cost efficiency comparing to traditional road tunnel. However, the double-deck tunnel has a lower floor height than the general road tunnel due to the special structure used as the upper and lower lines by installing the middle slab on one excavation section. Therefore, it is relatively weak against fire accidents and ventilation problems occurring in tunnels. Thus study to develop the life safety system optimized to a double-deck tunnel has been systematically carried out in order to overcome their weak point. In this study, automatic monitoring fire extinguisher (AMFE) is developed to suppress a fire and prevent its spread at early stage of tunnel fire, conducting the performance test through vehicle fire tests as verification. The tests were conducted with AMFE being 30 m apart from the vehicle and 10 m apart from engine room. As a results, it was confirmed that AMFE enables to suppress a fire and prevent its spread in both cases.

Systematic Analysis of Microbial Contamination in Leaf and Stem Products in Korea (Systematic analysis 방법을 이용한 국내 엽경채류 농산물의 미생물학적 오염도 분석)

  • Sung, Seung-Mi;Min, Ji-Hyeon;Kim, Hyun Jung;Yoon, Ki-Sun;Lee, Jong-Kyung
    • Journal of Food Hygiene and Safety
    • /
    • v.32 no.4
    • /
    • pp.306-313
    • /
    • 2017
  • This study systemically analyzed the data on the microbial levels in fresh vegetables in Korea to identify the points to control. We scanned the studies published between 2001 and 2015 in peer-reviewed research papers on the microbial levels in fresh vegetables produced in Korea. Plant products were categorized by using the US IFSAC (Interagency Food Safety Analytics Collaboration) category. The most consumed, the non-heat treated, the epidemiological foodborne diseases sources of fresh vegetable in foodservice (KCDC data) were identified by literature review. Articles were screened using National Digital Science Library (NDSL) search engine regarding to microbial hazards in plant products. Based on the total plate count number and coliforms on the 89 data cases from 26 published articles, the total plate count number was high in the order of sprouts, leaf and stem, bulbs and roots, vine-grown, solanaceous, melons, and pome. Escherichia coli was frequently detected in leaf and stem and sprouts products. Focused on the microbial data of leek, lettuce and cabbage, the levels of total plate count, coliforms and Bacillus cereus showed the levels of 4.15~7.69 log CFU/g, 1~6.99 log CFU/g, and 0.51~3.9 log CFU/g, respectively, by 33 published papers. The levels of environmental factors affecting the microbial safety of lettuce and leek before harvest were investigated. Manure, soil, hands, scale, gloves were the major potential microbial contamination points to control. In addition, GAP (good agricultural practice), microbial testing, and improvement of irrigation methods are required to provide the safer fresh produce.